UpdateMotion's InterpretedMotionState payload includes not just
ForwardCommand but a whole Commands[] list of MotionItem entries — each
carrying an Action (attack, portal, skill use), Modifier (jump,
stop-turn), or ChatEmote (Wave, BowDeep, Laugh) that should overlay the
current cycle. The old parser stopped reading after ForwardSpeed, so
emotes/attacks/deaths never reached the sequencer and NPCs just sat in
their idle cycle.
Three parts:
1. New MotionItem wire record in ServerMotionState — carries Command
(u16), PackedSequence (u16 with IsAutonomous bit + 15-bit stamp),
and Speed (f32). Mirrors ACE Network/Motion/MotionItem.cs.
2. Both UpdateMotion.TryParse and CreateObject.TryParseMovementData
now read the full InterpretedMotionState: all 7 flag fields
(CurrentStyle, ForwardCommand, SidestepCommand, TurnCommand,
ForwardSpeed, SidestepSpeed, TurnSpeed) plus the numCommands ×
MotionItem tail. The packed u32 encodes flags in low 7 bits and
command count in bits 7+ (see ACE InterpretedMotionState.cs:131).
3. New MotionCommandResolver — reconstructs the 32-bit MotionCommand
class byte from a 16-bit wire value via a reflection-built lookup
of DatReaderWriter.Enums.MotionCommand. Server serializes as u16
(ACE InterpretedMotionState.cs:139) and we need the class to route:
- 0x10xxxxxx Action / 0x20xxxxxx Modifier / 0x12,0x13 ChatEmote →
PlayAction (resolves from Modifiers or Links dict, overlays on
current cycle)
- 0x40xxxxxx SubState → SetCycle (cycle change)
4. OnLiveMotionUpdated in GameWindow dispatches each command:
- SubState class (0x40xxx) → SetCycle (treated same as
ForwardCommand)
- Action/Modifier/ChatEmote → PlayAction — the link animation
plays once then drops back to the current cycle naturally
(matches retail's action-queue pattern in CMotionInterp
DoInterpretedMotion, decompile FUN_00528F70).
Result: NPCs now animate attacks, waves, bows, death throes, and other
one-shots that ACE broadcasts via the Commands list rather than the
primary ForwardCommand field. Combined with the dead-reckoning + speed-
scaling from the prior commits, remote characters look visually correct
during the full motion spectrum (idle → walk → run → attack → death).
Tests: 2 new UpdateMotion wire-format tests (ForwardSpeed parse, full
Wave command list parse) + 19 new MotionCommandResolver reconstruction
tests covering SubState, Action, and ChatEmote classes. 654 tests green
(was 633).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The previous tests pinned the buggy 8-byte header assumption. Now they
match ACE's actual wire format: u16 movSeq + u16 srvSeq + u8 isAuto +
1 pad (via BinaryWriter.Align based on absolute stream length 15→16).
All 166 Core.Net tests now green again.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Closes the single biggest P0 gap from r08: the AppraiseInfo blob
carried by both IdentifyObjectResponse (0x00C9) and the initial
PlayerDescription (0x0013) is now parsed end-to-end for the six core
property tables.
Wire layer:
- AppraiseInfoParser.TryParse returns a Parsed record:
(Guid, Flags, Success, PropertyBundle, SpellBook[]).
- IdentifyResponseFlags enum mirrors ACE's bitfield exactly.
- Header reader: u16 count + u16 numBuckets (ACE
PackableHashTable.WriteHeader format).
- Per-table readers: IntStatsTable, Int64StatsTable, BoolStatsTable
(u32 → bool), FloatStatsTable (f64 values), StringStatsTable
(string16L values with 4-byte pad), DidStatsTable.
- SpellBook reader: u32 count followed by count u32 spell ids, with
sanity cap at 4096 entries.
What's NOT yet parsed (deferred, noted in XML doc):
- ArmorProfile / CreatureProfile / WeaponProfile / HookProfile blobs
require porting their respective Structure classes.
- Enchantment bitfields (u16 highlight + u16 color triplets).
- ArmorLevels block.
The parser is defensive: malformed / truncated tables raise
FormatException which is caught internally; the caller gets
whatever properties parsed successfully before the error.
Tests (7 new):
- Header-only (no tables).
- IntStatsTable round-trip with mixed sign values.
- BoolStatsTable (u32 ↔ bool conversion).
- StringStatsTable with padded-length strings.
- SpellBook parsing.
- Combined flags across multiple tables.
- Truncated payload → null.
Build green, 628 tests pass (up from 621).
This unlocks the Attributes / Skills / Paperdoll UI panels once their
renderers land — every property key the server sends now gets stored
on the target ItemInstance (or — for PlayerDescription — the player's
own property bag once wired).
Ref: ACE AppraiseInfo.Write (AppraiseInfo.cs:735), PackableHashTable.
Ref: r08 §4 payload for 0x00C9.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Outbound GameActions for XP-spending + combat-mode-change. These
complete the wire surface for the character-sheet UI: the player
clicks "spend XP on Strength," the panel calls BuildRaiseAttribute,
the session sends it, the server responds with updated PlayerDescription
or PrivateUpdateAttribute GameEvents.
Wire layer:
- BuildRaiseAttribute (0x0045): attrId u32, xpSpent u64.
- BuildRaiseVital (0x0044): vitalId u32, xpSpent u64.
- BuildRaiseSkill (0x0046): skillId u32, xpSpent u64.
- BuildTrainSkill (0x0047): skillId u32, credits u32 (note: credits
is u32 here, NOT u64 like the xpSpent variants).
- BuildChangeCombatMode (0x0053): mode enum as u32
(Undef=0, NonCombat=1, Melee=2, Missile=3, Magic=4, Peaceful=5).
Tests (5 new): byte-exact encoding of each, including the Train/
Raise size difference due to u32 vs u64 payloads.
Build green, 621 tests pass (up from 616).
Ref: r08 §3 rows 0x0044 / 0x0045 / 0x0046 / 0x0047 / 0x0053.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Click-to-interact wire layer. Adds the three most common "do a thing
to an object" GameActions that the UI triggers on left-click / use-item
contexts.
Wire layer:
- InteractRequests.BuildUse (0x0036): single target guid — click a
door, loot a corpse, talk to an NPC, activate a lifestone, step on
a portal.
- InteractRequests.BuildUseWithTarget (0x0035): source + target —
key on locked door, scroll on self, salvage tool on item.
- InteractRequests.BuildTeleToLifestone (0x0063): no-arg recall. Fails
server-side if not tied; reply comes back as GameEvent WeenieError.
Server reply for Use + UseWithTarget is GameEventType.UseDone (0x01C7)
carrying a WeenieError code (0 = success). Already parsed; wiring
into a "UseDone" event on CombatState-style holder can be a follow-up.
Tests (3 new): byte-exact encoding of all three builders.
Build green, 616 tests pass (up from 613).
Ref: r08 §3 rows 0x0035/0x0036/0x0063.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Client-side allegiance data model + outbound swear/break actions.
The inbound AllegianceUpdate blob (0x0020) is complex and is deferred;
the tree API here is designed so the handler can push nodes in when
the blob parser lands.
Wire layer:
- AllegianceRequests.BuildSwear (0x001D): single uint32 patronGuid.
- AllegianceRequests.BuildBreak (0x001E): single uint32 targetGuid
(works for both breaking from patron and breaking away a vassal;
the server picks behavior based on the relationship).
Core layer (AcDream.Core/Allegiance):
- AllegianceNode: Guid, Name, PatronGuid, Rank (clamped 0..10),
VassalGuids list.
- AllegianceTree: Dictionary-backed, events on TreeChanged.
- SetMonarch: registers the root (no patron).
- UpsertNode: adds/refreshes + auto-inserts into parent's vassal list.
- RemoveNode: removes from parent list too; descendants are left with
dangling patron pointers for the UI to hide (next AllegianceUpdate
refreshes).
- GetAncestors: walks up to monarch, cycle-detected for defense.
- GetDescendants: BFS-order flattening.
- AllegianceMath.ComputePassup: retail XP formula
(50+22.5×loyalty)/291 × (1+RT/730×IG/720) × earned,
clamped at 0.
Tests (11 new):
- Tree: SetMonarch fires TreeChanged, UpsertNode auto-populates parent
vassal list, rank clamp at 10, RemoveNode cleans parent list,
GetAncestors chain, cycle-safe walk, GetDescendants BFS order.
- Math: Passup known-value check (1000 XP, 10 loyalty, 100 RT/IG
days → ~963 XP), negative clamp.
- Wire: Swear + Break byte-exact encoding.
Build green, 613 tests pass (up from 602).
Next: wire inbound AllegianceUpdate (0x0020) + AllegianceInfoResponse
(0x027C) handlers once the blob parser lands. Chat "Allegiance"
Turbine channel joining (r11 §2.1 step 9) layers on top of
Phase H.1 chat infrastructure.
Ref: r11 §1 (tree structure + rank cap), §2 (swear/break wire),
§3.2 (XP passup formula).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Completes the client-side combat loop: send attacks, receive server's
damage broadcasts, maintain per-entity health state for HP bars +
damage floaters. All atop Phase F.1's GameEvent dispatcher.
Wire layer:
- AttackTargetRequest (0x0008 C→S, inside 0xF7B1): targetGuid +
powerLevel + accuracyLevel + attackHeight. 28-byte body.
- GameEvents parsers for all combat notifications from r08 §4:
- VictimNotification (0x01AC) — you got hit, full details
- KillerNotification (0x01AD) — you killed X
- AttackerNotification (0x01B1) — you hit X for Y (damage%)
- DefenderNotification (0x01B2) — X hit you
- EvasionAttackerNotification (0x01B3) — X evaded
- EvasionDefenderNotification (0x01B4) — you evaded X
- AttackDone (0x01A7) — attack sequence completed
Core layer:
- CombatState: per-entity health-percent cache + typed events
(HealthChanged, DamageTaken, DamageDealtAccepted, EvadedIncoming,
MissedOutgoing, AttackDone). Each event carries enough detail for
the UI to render damage floaters, HP bars, and a combat log panel.
Server is authoritative; client only mirrors state.
The server computes damage (armor, resist, crit, hit-chance); the
client only displays results. Predictive UI like "estimated damage
at 0.75 power" still works via the existing CombatMath helper class
that was in the scaffold (r02 §5 formulas).
Tests (13 new):
- AttackTargetRequest byte-exact wire encoding
- VictimNotification / AttackerNotification / EvasionAttacker /
AttackDone round-trip parse.
- CombatState: UpdateHealth caches + fires, Victim fires DamageTaken,
Attacker fires DamageDealt, Evasion routes to right event, AttackDone
carries sequence+error, Clear resets cache.
Build green, 544 tests pass (up from 532).
Ref: r02 §7 (wire formats), r08 §4 (event payloads), ACE
GameEvent*Notification.cs families.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Implements the inbound GameEvent routing layer — the single biggest
network-protocol gap per r08 (94 sub-opcodes, zero handled before).
WorldSession now detects 0xF7B0, parses the 16-byte header (guid +
gameEventSequence + eventType), and forwards to a pluggable
GameEventDispatcher.
Added:
- GameEventEnvelope record + TryParse with layout from
ACE GameEventMessage.cs.
- GameEventType enum: all 94 S→C sub-opcodes from
ACE.Server.Network.GameEvent.GameEventType, named per ACE conventions.
- GameEventDispatcher: handler registry + unhandled-counts bag for
diagnostics ("which server events are firing that we don't parse?").
Handlers invoked synchronously on the decode thread; thrown exceptions
are swallowed + logged to stderr so one bad handler can't take down
the packet loop.
- GameEvents parsers: ChannelBroadcast, Tell, TransientMessage,
PopupString, WeenieError (+ WithString), UpdateHealth, PingResponse,
MagicUpdateSpell. Each returns a typed record or null on malformed
payload. String16L helper matches the existing CharacterList pattern
(u16 length + ASCII bytes + 4-byte pad).
- WorldSession.GameEvents property exposing the dispatcher so
GameWindow / UI / chat can register handlers at startup.
Wired into WorldSession.ProcessDatagram: new `else if (op ==
GameEventEnvelope.Opcode)` branch with TryParse + Dispatch.
Tests (13 new):
- Envelope: valid round-trip, wrong outer opcode, too-short body.
- Dispatcher: handler invoked, unhandled count, exception isolation,
unregister + rollover to unhandled.
- Event parsers: ChannelBroadcast, Tell, UpdateHealth, WeenieError,
Transient, MagicUpdateSpell.
Total: 521 tests pass (up from 508).
With this dispatcher in place, Phase F.2 (items + appraise), F.3 (combat
+ damage), F.4 (spell cast state machine), chat UI, allegiance, quest
tracker — all of which depend on GameEvent handling — are unblocked.
Ref: r08 §4 (GameEvent sub-opcode table), §2 (envelope wire shape).
Ref: ACE GameEventMessage.cs / GameEventType.cs.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Outbound GameAction message builders for player movement:
- MoveToState (0xF61C): sent on motion state changes (start/stop
walking, turn, speed change). Carries RawMotionState (flag-driven
variable fields) + WorldPosition + sequence numbers.
- AutonomousPosition (0xF753): periodic position heartbeat sent
every ~200ms while moving. No RawMotionState — just WorldPosition
+ sequences + contact byte.
Both follow the GameAction envelope pattern (0xF7B1 + sequence +
action type) established by GameActionLoginComplete. Wire format
ported from references/holtburger movement protocol — field order
and alignment match exactly (contact byte + pad_to_4).
Also:
- Adds WriteFloat to PacketWriter (needed by both builders)
- Adds SendGameAction + NextGameActionSequence to WorldSession
(public wrappers for PlayerMovementController in Task 2)
11 new tests, 265 total, all green.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
User reported that when they observed acdream's character through a
second AC client running on a different account, the character
rendered as a stationary purple haze (AC's "loading screen / portal
space" indicator) instead of a normal avatar. The character was
"in-world enough" to receive the CreateObject stream but never
"in-world enough" for the server to flip its first-enter-world flag,
push initial property updates / equipment overrides, or show the
character to other clients in the area.
Root cause: WorldSession.EnterWorld stopped after sending
CharacterEnterWorld (0xF657). The handshake is supposed to continue
with one more message — a GameAction(LoginComplete) — that ACE's
GameActionLoginComplete handler interprets as "client has exited
portal space, mark FirstEnterWorldDone, push property updates,
make the character visible to others."
Wire layout (confirmed via
references/ACE/Source/ACE.Server/Network/GameAction/GameActionPacket.cs
and .../Actions/GameActionLoginComplete.cs):
u32 game-message opcode = 0xF7B1 (GameAction)
u32 sequence = 0 (ACE ignores; TODO comment in source)
u32 GameActionType opc = 0x000000A1 (LoginComplete)
Send happens immediately after CharacterEnterWorld and just before
flipping the WorldSession state to InWorld. acdream has no portal-
space transition animation, so we can claim "loading complete" the
moment we've sent the EnterWorld message — the dat-side world is
already loaded by then.
1 new test (97 Core.Net total). 220 tests green overall.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Companion to the Phase 6.6 UpdateMotion parser. Without this, every
server-spawned entity stays frozen at its CreateObject origin forever
— NPCs don't patrol, creatures don't hunt, other players don't walk
past. UpdatePosition is the per-entity position delta the server sends
on every movement tick.
The wire format is straightforward but fiddly:
u32 opcode | u32 guid | u32 flags | u32 cellId | 3xf32 pos
(0..4) conditional f32 rotation components, present iff the
corresponding OrientationHasNo* flag is CLEAR
optional 3xf32 velocity iff HasVelocity
optional u32 placementId iff HasPlacementID
four u16 sequence numbers (consumed but not used)
Layout ported from references/ACE/Source/ACE.Server/Network/Structure/
PositionPack.cs::Write and ACE.Entity/Enum/PositionFlags.cs.
WorldSession dispatches PositionUpdated(guid, position, velocity) on
a successful parse. GameWindow wiring (guid → WorldEntity lookup and
transform swap) is deferred to the same follow-up commit that lands
Phase 6.6 wiring, after the in-flight Phase 9.1 translucent-pass work
merges so we don't step on GameWindow.cs edits.
96 Core.Net tests (was 89, +7 for UpdatePosition coverage).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Server sends UpdateMotion whenever an entity's motion state changes:
NPCs starting a walk cycle, creatures switching to a combat stance,
doors opening, a player waving, etc. Phase 6.1-6.4 already handles
rendering different (stance, forward-command) pairs for the INITIAL
CreateObject, but without this message NPCs freeze in whatever pose
they spawned with and never transition to walking/fighting.
Added UpdateMotion.TryParse with the same ServerMotionState the
CreateObject path uses, reached via a slightly different outer
layout (guid + instance seq + header'd MovementData; the MovementData
starts with the 8-byte sequence/autonomous header this time rather
than being preceded by a length field). Only the (stance, forward-
command) pair is extracted — same subset CreateObject grabs.
WorldSession dispatches MotionUpdated(guid, state) when a 0xF74C
body parses successfully. The App-side wiring (guid→entity lookup
and AnimatedEntity cycle swap) is intentionally deferred to a
separate commit because it touches GameWindow which is currently
being edited by the Phase 9.1 translucent-pass work.
89 Core.Net tests (was 83, +6 for UpdateMotion coverage).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Drives the full post-handshake flow on a live ACE server. After the
3-way handshake completes, acdream:
1. Reassembles CharacterList and parses out every character on the
account (tested against testaccount which has two: +Acdream and
+Wdw). Full field decode: GUIDs, names, delete-delta, slotCount,
accountName, turbine chat, ToD flag.
2. Picks the first character and builds a single-fragment
CharacterEnterWorldRequest (opcode 0xF7C8, empty body beyond opcode)
on the UIQueue, wraps it with EncryptedChecksum + BlobFragments,
consumes one outbound ISAAC keystream word, and sends.
3. Waits for CharacterEnterWorldServerReady (opcode 0xF7DF) to confirm
the server accepted our encrypted outbound packet.
4. Builds CharacterEnterWorld (opcode 0xF657, body = u32 guid +
String16L accountName) and sends as a second fragment with
fragment_sequence 2, packet sequence 3.
5. Drains 10 seconds of post-login traffic: 101 GameMessages assembled,
68 of which are CreateObject (0xF745) — the entities around
+Acdream spawning into our session. Also saw DeleteObject (0xF746),
ObjectDescription (0xF74C), SetState (0xF755), GameEvent (0xF7B0),
LoginCharacterSet (0xF7E0), and a 0x02CD smaller opcode.
This is the Phase 4.7 win: acdream is authenticated, connected,
character-selected, logged in, and actively receiving the world state
stream, all with ZERO protocol errors. Every byte of every packet we
sent to the server was correct — the first bit wrong in our outbound
ISAAC math would have produced silent disconnect instead of 101
successful replies.
Added to AcDream.Core.Net:
- Messages/CharacterList.cs: full parser for opcode 0xF658, ported
from ACE's GameMessageCharacterList writer. Returns structured
record with Characters[], SlotCount, AccountName, UseTurbineChat,
HasThroneOfDestiny. Tested offline with hand-assembled bodies
matching ACE's writer format.
- Messages/CharacterEnterWorld.cs: outbound builders for
CharacterEnterWorldRequest (0xF7C8, opcode-only) and
CharacterEnterWorld (0xF657, opcode + guid + String16L account).
- Messages/GameMessageFragment.cs: helper to wrap a GameMessage body
in a single MessageFragment with correct Id/Count/Index/Queue and
Sequence. Also a Serialize helper to turn a MessageFragment into
packet-body bytes for PacketCodec.Encode. Throws on oversize
(>448 byte) messages; multi-fragment outbound split is TBD.
- GameMessageGroup enum mirroring ACE byte-for-byte (UIQueue = 0x09
is the one we use for enter-world).
Fixed: FragmentAssembler was keying on MessageFragmentHeader.Id, but
ACE's outbound fragment Id is ALWAYS the constant 0x80000000 — the
unique-per-message key is Sequence, matching how ACE's own
NetworkSession.HandleFragment keys its partialFragments dict. Our
live tests happened to work before because every GameMessage we'd
seen was single-fragment (hitting the Count==1 shortcut), but
multi-fragment CreateObject bodies would have silently mixed. Fixed
now and all 7 FragmentAssembler tests still pass with the Sequence-key.
Tests: 9 new offline (4 CharacterList, 2 CharacterEnterWorld, 3
GameMessageFragment), 1 new live (gated by ACDREAM_LIVE=1). Total
77 core + 83 net = 160 passing.
LIVE RUN OUTPUT:
step 4: CharacterList received account=testaccount count=2
character: id=0x5000000A name=+Acdream
character: id=0x50000008 name=+Wdw
choosing character: 0x5000000A +Acdream
sent CharacterEnterWorldRequest: packet.seq=2 frag.seq=1 bytes=40
step 6: CharacterEnterWorldServerReady received
sent CharacterEnterWorld(guid=0x5000000A): packet.seq=3 frag.seq=2 bytes=60
step 8 summary: 101 GameMessages assembled, 68 CreateObject
unique opcodes seen: 0xF7B0, 0xF7E0, 0xF746, 0xF745, 0x02CD,
0xF755, 0xF74C
Phase 4.7 next: start decoding CreateObject bodies to extract GUID +
world position + setup/GfxObj id, so these entities can flow into
IGameState and render in the acdream game window. The foundry statue
is waiting in one of those 68 spawns.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
