Per Phase A.5 spec §4.6 Change #2: WalkEntities's per-entity AABB
frustum cull was recomputing Position±5 per frame per entity. With
~10.7K entities (N1=4) at 240 FPS that is ~2.5M wasted Vector3
ops/sec.
Read the AABB from the WorldEntity cache (T8 schema) instead.
RefreshAabb runs lazily on AabbDirty=true. Populate at register time:
- LandblockLoader.BuildEntitiesFromInfo: RefreshAabb after each new
WorldEntity construction (stabs + buildings). Refactored from
inline object-initializer to named variable to enable the call.
- EntitySpawnAdapter.OnCreate: RefreshAabb after entity state init
(position/rotation already set via the WorldEntity passed in).
Dynamic entities (NPCs, players) move every frame via direct
Position writes in GameWindow.cs. Migrated all three per-frame
write sites to SetPosition() (T8 mutator) so AabbDirty propagates:
- line 5942: player entity render position update
- line 6951: remote animated entity interpolated path
- line 7279: remote animated entity landing/movement path
The lazy RefreshAabb in WalkEntities catches up on the next frame
after any SetPosition call — render thread only, no races.
Build green, 986 passed / 8 pre-existing failures unchanged.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Widens LandblockMesh.Build's surfaceCache parameter from Dictionary to
IDictionary so any IDictionary implementation compiles at call sites.
Switches GameWindow._surfaceCache from Dictionary to ConcurrentDictionary
so T11's streaming worker can call Build off the render thread without
a lock.
The TryGetValue+assign lookup inside Build is not atomic, but BuildSurface
is deterministic (same palCode -> same SurfaceInfo), making last-write-wins
under concurrent access benign. Comment added at the pattern site.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds AabbMin/AabbMax (per-entity world-space bounding box) and AabbDirty
flag to WorldEntity. RefreshAabb() recomputes the box from Position ±5 m
(DefaultAabbRadius). SetPosition() writes Position and marks the cache
dirty so the dispatcher calls RefreshAabb on first read rather than
carrying stale bounds.
AabbDirty defaults to true on construction — freshly-built entities have
zero AabbMin/AabbMax until RefreshAabb is called. Two new conformance tests
verify the ±5 m geometry and the dirty/clean state machine.
Per Phase A.5 spec §4.6 Change #2.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Resolves Adjustment 4 (Option A): WorldEntity now carries the server-
sent AnimPartChange data as PartOverrides and a HiddenPartsMask bitmask.
EntitySpawnAdapter.OnCreate populates AnimatedEntityState from these
fields at spawn time. GameWindow's CreateObject handler converts the
network-layer AnimPartChange records into lightweight PartOverride
structs.
This unblocks Task 22: the WbDrawDispatcher can now resolve per-part
GfxObj overrides and hidden-part suppression from entity state.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Phase N.1 step 8 (final code cleanup): now that ACDREAM_USE_WB_SCENERY
has been default-on (commit b84ecbd), remove the legacy in-line
algorithms so we don't accumulate dead-code drift.
Deleted:
- SceneryGenerator.UseWbScenery (feature flag)
- SceneryGenerator.IsOnRoad / DisplaceObject / RoadHalfWidth (legacy
ports — Generate used to call them)
- The legacy in-line implementation in Generate()
- SceneryGeneratorTests.DisplaceObject_* (test the deleted method)
- SceneryWbConformanceTests.cs entirely (purpose served — proved
equivalence pre-migration; would compare WB to WB after delete)
Renamed:
- GenerateViaWb -> GenerateInternal (it's the only path now)
Kept:
- Public IsRoadVertex predicate (small surface, useful)
- WbSceneryAdapter (consumed by GenerateInternal)
- All WbSceneryAdapterTests (still cover the adapter)
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Phase N.1 step 7: flips ACDREAM_USE_WB_SCENERY to default-on after
visual verification at Holtburg confirmed Issue #49's previously
missing edge-vertex trees are still visible and rotation is correct.
A known cosmetic difference (the road-edge tree at landblock 0xA9B1)
remains. ACME WorldBuilder applies an additional per-vertex road
check that suppresses it; we tried adding it (commit e279c46) but
it over-suppressed in other landblocks (reverted in 677a726). Filed
as a follow-up issue in ISSUES.md (added in Task 8).
ACDREAM_USE_WB_SCENERY=0 still reverts to the legacy path. Task 8
will delete the legacy path entirely once a session passes without
visual regressions on default-on.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Phase N.1 hotfix: scenery near a road still rendered in acdream
even with WB-backed generation. Investigation (worktree session
2026-05-08) showed ACME WorldBuilder skips the entire vertex when
its road bit is set, before any per-object spawn rolls. ACME line:
references/WorldBuilder-ACME-Edition/WorldBuilder/Editors/Landscape/GameScene.cs:1074
if (entry.Road != 0) continue;
This check was previously REMOVED in commit 833d167 with a comment
claiming retail doesn't have it. The comment was wrong: ACME mirrors
retail and keeps the check, and the upstream Chorizite/WorldBuilder
we forked omits it (which is why our newly-WB-backed Generate path
still produced the bad tree). Adding back to both Generate (legacy)
and GenerateViaWb (WB-backed) for parity.
This does NOT regress #49: the 9x9 loop expansion that recovered
missing edge-vertex scenery is unchanged. Only vertices whose own
road bit is set are now skipped -- same as ACME.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Phase N.1 step 5: when the flag is set, Generate() delegates to
GenerateViaWb. Default off; flag flips to default-on in step 7
after visual verification.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Phase N.1 step 4: parallel implementation of Generate() that calls
WB's SceneryHelpers (Displace/CheckSlope/RotateObj/ObjAlign/ScaleObj)
and TerrainUtils (OnRoad/GetNormal) instead of the inline ports.
Not yet wired in — Generate() still runs the legacy path. Step 5
adds the dispatch.
Per-helper conformance tests in step 3 prove the Displace/OnRoad/
GetNormalZ/ScaleObj substitutions are behavior-equivalent. Rotation
is intentionally NOT conformance-tested because our existing port
diverges from retail by ~180°; WB's RotateObj fixes that bug.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Phase N.1 step 3: prove our inline algorithms match WorldBuilder's
helpers for representative inputs including the 0xA9B1 edge-vertex case.
Four conformance tests pass: Displace, OnRoad, GetNormalZ, ScaleObj.
Our hand-ported algorithms match WB's helpers exactly for these.
Rotation is intentionally NOT conformance-tested. Investigation against
retail's Frame::set_heading (named-retail 0x00535e40) and
Frame::set_vector_heading (0x00535db0) showed our acdream port uses a
shortcut formula `yawDeg = -(450-degrees)%360` that diverges from
retail's atan2 round-trip by ~180°. WorldBuilder's SetHeading ports
the round-trip faithfully and matches retail. Our existing port is
wrong — undetectable visually because per-tree rotation noise masks
the offset. The migration to WB.SceneryHelpers.RotateObj fixes this
bug; adding a conformance test would lock in the wrong behavior.
Bumps IsOnRoad to internal so the OnRoad conformance test can call it.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Phase N.1 step 2: read the env var into a static bool. No behavior
change yet — the flag is consumed in step 5 when GenerateViaWb is
wired in.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Addresses code-review feedback on commit 26cf2b8. The dropped
ArgumentException length guards were correct to drop because
DatReaderWriter.LandBlock self-initializes Terrain[] and Height[]
to length 81 in its constructor — but that invariant was not
documented anywhere visible to future readers. Adds an XML doc
<remarks> block explaining the guarantee so callers constructing
synthetic LandBlocks know what to expect.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Phase N.1 step 1: WbSceneryAdapter.BuildTerrainEntries converts our
LandBlock dat type into the TerrainEntry[81] shape WorldBuilder's
TerrainUtils / SceneryRenderManager consume.
Field mapping (TerrainInfo → TerrainEntry):
TerrainInfo.Road (bits 0-1) → TerrainEntry.Road
TerrainInfo.Type (bits 2-6) → TerrainEntry.Type
TerrainInfo.Scenery (bits 11-15) → TerrainEntry.Scenery
LandBlock.Height[i] → TerrainEntry.Height
The spec listed the texture property as 'Texture' but TerrainEntry's
actual property is named 'Type' (confirmed from source). The spec also
described LandBlock.Terrain as ushort[81] but it is TerrainInfo[81] —
DatReaderWriter already decodes the bit fields so the adapter uses
TerrainInfo's named properties rather than raw bit-shift expressions.
Spec: docs/superpowers/specs/2026-05-08-phase-n1-scenery-via-wb-helpers-design.md
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Phase N.0 setup for the WorldBuilder migration. Replaces the local
read-only clone of Chorizite/WorldBuilder at references/WorldBuilder/
with a git submodule pointing at our fork
(github.com/eriknihlen/WorldBuilder.git, branch acdream).
Changes:
- .gitignore: exempt references/WorldBuilder from the references/
ignore rule so the submodule can be tracked.
- .gitmodules (new): submodule entry tracking acdream branch on fork.
- src/AcDream.Core/AcDream.Core.csproj: add ProjectReference to
WorldBuilder.Shared and Chorizite.OpenGLSDLBackend so we can call
TerrainUtils, SceneryHelpers, etc. from our Core code.
Build green, all 93 scenery/terrain tests pass. The 8 pre-existing
DispatcherToMovement test failures are unrelated and exist on main.
Notes for users picking up this branch on main:
- After merge, the existing local clone at references/WorldBuilder
may need to be removed before `git submodule update --init` will
populate the submodule.
- Working on the fork happens via `cd references/WorldBuilder && git
checkout acdream && <changes> && git push`. To pull upstream
Chorizite/WorldBuilder fixes: `git remote add upstream
https://github.com/Chorizite/WorldBuilder.git && git fetch upstream
&& git merge upstream/master`.
Next: Phase N.1 — replace SceneryGenerator algorithm calls with
WB's SceneryHelpers + TerrainUtils.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The obj_within_block check using Setup.SortingSphere.Radius rejects
far too many spawns. Sorting spheres for trees are 5-10m, creating
a wide exclusion zone around every landblock edge. WorldBuilder
produces correct scenery with just bounds+road+building+slope checks
and no bounding sphere check. Revert to match WorldBuilder's approach.
The single extra tree near the road at vtx=(4,8) in 0xA9B1 remains
as a known minor discrepancy from retail — root cause TBD.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Retail's CLandBlock::get_land_scenes creates a PhysicsObj for each
scenery spawn, then calls CPhysicsObj::obj_within_block (0x00461c30)
which verifies the model's sorting sphere stays within [r, 192-r] on
both axes. Edge-vertex spawns displaced close to the boundary (e.g.,
a tree at Y=190.97 from vertex y=8) get rejected because their sorting
sphere extends past the landblock edge.
We were missing this check, which caused a tree near a road at
~(85, 191) in landblock 0xA9B1 to appear in acdream but not retail.
The tree legitimately passed all other filters (road, building, slope)
but its Setup sorting sphere radius (~2-5m) meant it overflowed the
boundary.
Fix: look up each unique Setup's SortingSphere.Radius from the dat
(cached per objectId) and apply the within-block bounds check after
the slope filter, matching retail's order. GfxObj objects (0x01) use
radius 0 (permissive) since they're typically small single-mesh items.
Also: remove temporary ACDREAM_SCENERY_DIAG logging, fix duplicate
xmldoc on IsOnRoad, update road check reference to named-retail PDB
symbol (CLandBlock::on_road at 0x0052FFF0).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Three fixes to match retail CLandBlock::get_land_scenes (0x00530460):
1. Loop bound: iterate 9×9 vertices (side_vertex_count=9), not 8×8
cells. Edge vertices (x=8 or y=8) produce valid spawns when the
per-object displacement shifts the position back into [0, 192).
Confirmed by named retail decomp do-while condition, WorldBuilder
vertLength=9, ACViewer Terrain.Count=81, AC2D wTopo[9][9].
2. Building suppression: check at the DISPLACED position's cell
(CSortCell::has_building per spawn), not at the loop vertex index.
Matches WorldBuilder buildingsGrid[gx2, gy2] pattern.
3. Slope filter: replace finite-difference gradient approximation
with triangle-aware normal sampling via new static method
TerrainSurface.SampleNormalZFromHeightmap. Picks the correct
triangle via IsSplitSWtoNE, matching retail find_terrain_poly →
polygon->plane.N.z and WorldBuilder's GetNormal().
Tests: 5 new tests for SampleNormalZFromHeightmap (flat=1.0, sloped<1,
cross-validates with SampleSurface instance method) and DisplaceObject
edge-vertex validity.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Closes#48. Trees on sloped cells visibly hovered above the visible
terrain because GameWindow.SampleTerrainZ (the bilinear fallback used
during scenery hydration before physics registers a landblock) had
its diagonal arms swapped — used the SEtoNW triangle test on SWtoNE
cells and vice versa. The ACDREAM_DUMP_SCENERY_Z=1 diagnostic showed
every scenery line ran through the bilinear path (streaming race),
so on hilly terrain scenery was placed at a Z up to ~1.5 m off from
the visible mesh.
Latent since ff325ab (2026-04-17 "feat(ui): debug overlay + refined
input controls" carrying along the upgrade). That commit reached for
WorldBuilder TerrainUtils.GetHeight as the secondary oracle and
re-derived the triangle-pair tests; the named-retail / ACE algorithm
in TerrainSurface.SampleZ (used by the physics path / player Z) was
always correct, so player feet stayed flush — the two paths just
disagreed and only scenery noticed.
Fix:
- TerrainSurface.InterpolateZInTriangle (private static) — single
source of truth for the triangle pick + barycentric Z, sourced
from FUN_00532a50 / ACE LandblockStruct.ConstructPolygons.
- TerrainSurface.SampleZFromHeightmap (public static) — heightmap-
byte-array variant for the scenery hydration fallback. Both this
and TerrainSurface.SampleZ (instance) now delegate to the same
InterpolateZInTriangle.
- GameWindow.SampleTerrainZ — thin wrapper over the new static.
- TerrainSurfaceTests.SampleZFromHeightmap_AgreesWithInstance_AcrossWholeLandblock
asserts both sampler paths agree at 1500 sample points across both
diagonals, so future drift gets caught.
The ACDREAM_DUMP_SCENERY_Z=1 diagnostic in BuildSceneryEntitiesForStreaming
is kept committed (env-var gated, zero cost when off) — useful for
the related #49 scenery (X, Y) placement investigation filed in the
same commit.
Visual verified at Holtburg landblock 0xA9B30001 2026-05-06: the
formerly floating 32 m pines (setups 0x020002D3 / 0x020002D9) now
sit flush on the visible terrain mesh.
Test baseline: dotnet test reports the same 8 pre-existing motion /
BSP step-up failures as the handoff doc warned about — no new
failures introduced.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Humanoid bodies (Setup 0x02000001 + heritage variants) rendered visibly
flat / bulky vs retail because we drew the base GfxObj id from Setup /
AnimPartChange directly. Retail's CPhysicsPart::LoadGfxObjArray
(0x0050DCF0) treats that base id as the entry point to a DIDDegrade
table; close/player rendering uses Degrades[0].Id, which is the
higher-detail mesh that carries bicep / deltoid / shoulder geometry.
ACViewer also has this bug — it was the key signal it isn't acdream-
specific. Both clients drew the LOD-3 base mesh (e.g. 14 verts / 17
polys for Aluvian Male upper arm 0x01000055), missing the close-
detail variant (0x01001795: 32 verts / 60 polys).
Adds GfxObjDegradeResolver that walks the table with safe fallbacks
at every step. Wired in GameWindow after AnimPartChange application
and before texture-change resolution so texture overrides match the
resolved mesh's surfaces. Gated by ACDREAM_RETAIL_CLOSE_DEGRADES=1
and scoped to humanoid setups (34 parts with >=8 null-sentinel
attachment slots) while the fix bakes — the change is harmless on
non-humanoid setups (resolver falls back to base when no degrade
table) but we hold the broader sweep until LOD distance plumbing
lands.
User confirmed visually 2026-05-06: bicep, deltoid, and back-muscle
definition match retail.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Visual-verify of fix#2 (commit 863d96b) showed [SCFULL] correctly reports
currNodeIsCyclic=True after each direct Walk↔Run SetCycle (the link is
removed and _currNode is set to _firstCyclic). User report still:
- Animation continues running visually after Shift toggle to Walk
- Body slows ("speed decreases"), causing rubber-banding
- Adding a turn motion in that state makes the cycle finally transition
to walking
So either:
- _currNode is reset to a stale node BETWEEN SetCycle and Advance
- _currNode is correctly on the new cycle but its AnimRef is wrong
(e.g., the same Animation as the previous cycle, dat-side issue)
- BuildBlendedFrame reads from somewhere other than _currNode
Adds CurrentNodeDiag + FirstCyclicAnimRefHash properties on
AnimationSequencer that expose the active node's Animation
identity-hash, IsLooping, Framerate, frame range, and FramePosition.
TickAnimations logs them on every SEQSTATE tick (1 Hz throttle, gated
on ACDREAM_REMOTE_VEL_DIAG=1).
The [CURRNODE] line with animRef vs firstCyclicAnimRef proves whether
_currNode is actually on the new cycle's anim or has drifted to
something else. Compared across SetCycle SCFULL log lines + the
following CURRNODE ticks, we can see the exact moment the cycle
diverges from what SetCycle set.
No code-behavior changes. Pure read-only instrumentation. Per
Phase 4.5 of systematic-debugging — STOP attempting fixes; gather
evidence first.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Root cause identified by research-agent read of AnimationSequencer.SetCycle
+ Advance + the per-tick TickAnimations call site:
- SetCycle enqueues transition link + new cycle, then forces _currNode
onto firstNew (the LINK), per the 357dcc0 fix that pinned _currNode
to the most-recently-enqueued node.
- Advance plays the link to completion (~100–300 ms at Framerate 30 ×
link runSpeed) before AdvanceToNextAnimation moves _currNode forward
to the cycle.
- For Walk↔Run direct toggles faster than the link's drain time, the
next UM arrives, SetCycle restarts _currNode on a fresh link, and
the cycle node at the queue tail is never reached.
- BuildBlendedFrame returns frames from the link the entire time —
user observes the link's interpolation pose ("blips forward in
walking animation"), never the new Walk or Run cycle.
Confirmed by [SCFULL] currNodeIsCyclic=False after every direct
Walk↔Run transition in launch-39-candidate.log.
Fix: when prev motion AND new motion are both locomotion cycles
(WalkForward, WalkBackward, RunForward, SideStep L/R), land
_currNode on _firstCyclic (the new cycle node) instead of firstNew
(the link), and remove the just-enqueued link from the queue.
Conditional on BOTH being locomotion to avoid regressing cases that
DO need the link to play:
- Idle→Run (link is the wind-up pose)
- Falling→Ready (landing animation)
- Ready→Sitting/Crouching/Sleeping
- Combat substates (attack/parry/ready transitions)
Reverted commit c06b6c5 demonstrated that unconditional link skip
breaks all of those — this fix is narrower.
Retail reference: cdb live trace 2026-05-03 of a Walk→Run direct
transition logged add_to_queue(45000005) followed by
add_to_queue(44000007) with truncate_animation_list never firing —
matching the observed semantics this fix implements.
42/42 AnimationSequencer tests pass. The 8 pre-existing test
failures elsewhere on the branch (BSPStepUp, MotionInterpreter
WalkBackward, etc.) are unrelated to this change.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Grounded player remotes were showing a ~5 Hz Z staircase when running
up/down slopes — the rate of server UpdatePositions. Body Z stayed flat
between UPs, then ramped over ~100ms during the queue-active chase to
each new server position, then went flat again until the next UP.
Diagnosis (no diagnostic needed — the math is unambiguous):
PositionManager.ComputeOffset has two modes via
InterpolationManager.AdjustOffset:
- Queue active (body chasing a waypoint): returns
`(head − body) / dist × min(catchUpSpeed × dt, dist)`. 3D direction,
Z follows server's reported Z naturally.
- Queue empty / head-reached (within DESIRED_DISTANCE = 0.05m of the
most recent UP): returns Vector3.Zero. ComputeOffset falls back to
`seqVel × dt rotated into world` — pure animation root motion. Every
locomotion cycle bakes Z=0 in body-local, so the world result has
Z=0 too. XY advances at the running pace; Z stays at the last UP.
For a runner at maxSpeed ≈ 4 m/s with catchUpSpeed = 2× = 8 m/s and
server UPs at ~5 Hz, body covers ~0.8m per UP, chases for ~100ms
(queue-active 3D path, Z ramps), then sits in seqVel-only mode for
~100ms (Z flat) until the next UP. Visible as a 5 Hz Z staircase.
Fix mirrors retail's CTransition::adjust_offset contact-plane projection
(named-retail acclient_2013_pseudo_c.txt:272296-272346) for grounded
motion, applied at the queue-empty boundary instead of inside the sweep:
PositionManager.ComputeOffset gains an optional Vector3? terrainNormal.
When the seqVel-only fallback runs AND a non-trivial terrain normal is
supplied, project rootMotionWorld onto the plane:
result = rootMotionWorld − N × dot(rootMotionWorld, N)
Anim XY motion gains a corresponding Z component proportional to slope
angle × forward speed, so body Z follows the terrain mesh between UPs.
No-op on flat ground (N ≈ +Z, dot ≈ 0); cannot regress L.3 M2's
flat-ground verification.
GameWindow.TickAnimations grounded-remote path samples
PhysicsEngine.SampleTerrainNormal at the body's current XY each tick
and passes it to ComputeOffset. SampleTerrainNormal is a thin public
wrapper over the existing internal SampleTerrainWalkable that returns
just the plane normal (no need to expose the internal sample shape).
Diagnostic: ACDREAM_SLOPE_DIAG=1 prints a per-tick [SLOPE] line with
guid, body Z before/after, offset, queue active flag, and the sampled
plane Nz so we can grep before/after the fix and confirm Z changes
continuously between UPs on slopes.
Tests: PositionManagerTests gains two cases:
- slope projection: 30° east-tilted plane, body running due east at
4 m/s for 1s → expect (3.0, 0, −1.732) (descends along slope, not
flat). Math: dot(seqVel, N) = 2.0 → result = (4,0,0) − (0.5,0,0.866)
× 2.0 = (3.0, 0, −1.732).
- flat-ground no-op: N = +Z, expect identical Y-only motion as the
pre-fix behavior.
Build green. 357 pass / 6 pre-existing fail (same set as ec59a08;
verified by stashing this change). The pre-existing
`ComputeOffset_BothActive_Combined` failure reflects an outdated
additive-design test docstring; the M2 commit (40d88b9) deliberately
changed the implementation to REPLACE semantics to fix the prior
3×-server-pace overshoot.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Root cause confirmed via two-run diagnostic and the named-retail decomp:
the airborne sweep was colliding with the moving entity's OWN ShadowEntry
because FindObjCollisions had no self-skip filter. Live entities (local
player, remotes) register a Cylinder in ShadowObjectRegistry on spawn
(GameWindow.cs:2545) and UpdatePosition tracks its world position each
tick, so the moving sphere's own cylinder is always at the body's
position. Without a gate, CylinderCollision sees the sphere overlapping
its own cylinder volume and slides the sphere ~1m horizontally on every
frame the path produces non-zero motion.
Why grounded mostly hides it and airborne exposes it:
- Stationary grounded → numSteps=0, TransitionalInsert never runs.
- Walking grounded → push fires but motion escapes the cyl radius and
the deflection blends into normal motion.
- Stationary airborne (jump) → pure +Z motion; the cyl push is the
only horizontal contribution and manifests as a clean ~1m drift.
Run-2 evidence (launch-42-r2.log) — 152 [SWEEP-OBJ] events, every one
with type=Cylinder, gfxObj=0x02000001 (humanoid setup), R=0.679,
H=1.835, at obj.Position EXACTLY matching the body's pre.Position. Run
1 had already ruled out H1 (cpN=(0,0,1) flat, no slope projection).
Retail does the same skip — CObjCell::find_obj_collisions at
named-retail acclient_2013_pseudo_c.txt:308931:
if ((physobj->parent == 0 && physobj != arg2->object_info.object))
`arg2->object_info.object` is the OBJECTINFO::object self-pointer set
by OBJECTINFO::init at acclient_2013_pseudo_c.txt:274435. Our port
mirrors this with an EntityId-based filter:
- ObjectInfo gains a SelfEntityId field (default 0 = no filter).
- ResolveWithTransition gains an optional `uint movingEntityId = 0`
parameter that sets it.
- FindObjCollisions skips entries whose EntityId matches
SelfEntityId when the id is non-zero.
- PlayerMovementController gains a LocalEntityId property; GameWindow
refreshes it per-tick from `_entitiesByServerGuid[_playerServerGuid]`.
- GameWindow's airborne-remote ResolveWithTransition call site passes
`movingEntityId: kv.Key` (kv.Key is the local entity id keying
`_animatedEntities`, same id used at the spawn-time
ShadowObjects.Register).
Default 0 keeps tests and one-shot callers (no registered ShadowEntry)
working unchanged.
Lock-the-fix unit test:
`PhysicsEngineTests.ResolveWithTransition_SelfShadowEntry_NotPushedWhenIdMatches`
registers a humanoid Cylinder at the body's exact position (matching
GameWindow's spawn pattern), then asserts that:
- movingEntityId=0 (control) → unfiltered XY drift > 0.5m
- movingEntityId=registered id (fix) → XY drift ≈ 0
Diagnostic wiring (a36369d + this commit's [SWEEP-OBJ] addition) stays
in tree, env-var gated (ACDREAM_AIRBORNE_DIAG=1) so it produces no
output in normal use but lets us verify the fix on the live client and
debug future regressions.
Build: green. Tests: 355 pass, 6 fail (all pre-existing per the handoff
prompt — verified by stashing this change; the BSPStepUp C3 failure is
on the prior commit too).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Phase 1 of #42 root-cause investigation per the handoff doc. We
A/B confirmed (commit b37b713) that the ~1m XY drift on retail-
observed stationary jumps comes from inside ResolveWithTransition
when the per-tick airborne sweep runs (CellId fix at GameWindow.cs
3467). What we don't yet know: whether the drift originates in
H1 (initial-overlap depenetration along a tilted-terrain normal),
H2 (step-down probe firing despite isOnGround=false), or H3
(EdgeSlide on near-vertical motion grazing a wall).
This diagnostic gates a one-line Console trace on
ACDREAM_AIRBORNE_DIAG=1 AND !isOnGround so it doesn't pollute
grounded movement, and prints:
[SWEEP] airborne pre=(...) target=(...) post=(...)
cell=PRE->POST ok=BOOL deltaXY=(dx,dy)
cp=valid|none cpN=(nx,ny,nz)
deltaXY = post - target — for a clean stationary +Z jump we
expect (0,0). Non-zero with cp=valid and a tilted cpN confirms
H1; non-zero direction tracking actor facing instead of terrain
orientation points to H2/H3.
Code-walk findings recorded for the next investigation pass:
- K-fix7 already prevents seeding ContactPlane on entry for
airborne (PhysicsEngine.cs:493-519), so step 0's AdjustOffset
cannot consume a stale plane.
- BUT ValidateWalkable can still SET ContactPlane during step 0's
collision pass via the "below plane" branch (TransitionTypes.cs
1320-1352) when sphere lowPoint dips below the tilted terrain
triangle. Step 1's AdjustOffset would then consume that fresh
plane and the "moving away from contact plane" branch
(TransitionTypes.cs:1749-1754) projects the +Z offset along the
slope normal, redirecting Z motion into XY.
- Step-down branch is correctly gated on oi.Contact (matches
retail CTransition::transitional_insert at named-retail
acclient_2013_pseudo_c.txt:273249, "(state & 1) == 0" returns
OK without firing step-down).
- Retail's IS_VIEWER_OI=0x4 branch in OBJECTINFO::validate_walkable
(acclient.h:6185) is never set anywhere in the named decomp,
so the airborne path runs the same code in retail as in acdream.
User repros at flat plaza / east hillside / north hillside; the
direction-correlation of deltaXY with local terrain orientation
identifies which hypothesis is firing.
Build green; 13 PhysicsEngine tests green. No behavior change
when ACDREAM_AIRBORNE_DIAG is unset.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Rewrites src/AcDream.Core/Physics/InterpolationManager.cs from the spec
in docs/research/2026-05-04-l3-port/04-interp-manager.md. Public API
preserved (Vector3-returning AdjustOffset, Enqueue, Clear, IsActive,
Count) so PositionManager + GameWindow callers continue to compile;
internals are full retail spec.
Bug fixes vs prior port (audit 04-interp-manager.md § 7):
#1 progress_quantum accumulates dt (sum of frame deltas), not step
magnitude. Retail line 353140; the prior port's `+= step` made
the secondary stall ratio meaningless.
#3 Far-branch Enqueue (dist > AutonomyBlipDistance = 100m) sets
_failCount = StallFailCountThreshold + 1 = 4, so the next
AdjustOffset call's post-stall check fires an immediate blip-to-
tail snap. Retail line 352944. Prior port silently drifted
toward far targets at catch-up speed instead of teleporting.
#4 Secondary stall test ports the retail formula verbatim:
cumulative / progress_quantum / dt < CREATURE_FAILED_INTERPOLATION_PERCENTAGE.
Audit notes the units are 1/sec (likely Turbine bug or x87 FPU
misread by Binary Ninja) — mirrored byte-for-byte regardless.
#5 Tail-prune is a tail-walking loop, not a single-tail compare.
Multiple consecutive stale tail entries within DesiredDistance
(0.05 m) of the new target collapse together. Retail line 352977.
#6 Cap-eviction at the HEAD when count reaches 20 (already correct
in the prior port; verified).
New API: Enqueue gains an optional `currentBodyPosition` parameter so
the far-branch detection can reference the body when the queue is
empty. Backward-compatible (default null = pre-far-branch behavior).
UseTime collapsed into AdjustOffset's tail (post-stall blip check)
since acdream has no per-tick UseTime call separate from
adjust_offset; identical semantic outcome.
State fields renamed to retail names with sentinel values:
_frameCounter, _progressQuantum, _originalDistance (init = 999999f
sentinel per retail line 0x00555D30 ctor), _failCount.
Tests:
- 17/17 InterpolationManagerTests green.
- New test Enqueue_FarBranch_PrearmsImmediateBlipOnNextAdjustOffset
pins the bug #3 fix: enqueueing 150 m away triggers a same-tick
blip (delta length ≈ 150 m), and the queue clears.
Spec tree: 17 research docs (00–14) under docs/research/2026-05-04-l3-port/.
00-master-plan + 00-port-plan describe the 8-phase rollout. 01-per-tick,
03-up-routing, 04-interp-manager, 05-position-manager-and-partarray,
06-acdream-audit, 14-local-player-audit are the L.3 spec used by this
commit and the M2 follow-up.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
End-of-session cleanup of the 2026-05-03 remote-motion debug session.
Documentation:
- CLAUDE.md: add ⚠️ DO-NOT-ENABLE warning for ACDREAM_INTERP_MANAGER=1
in the diagnostic env-vars list. Add an "Outbound motion wire format"
section documenting acdream's WalkForward+HoldKey.Run encoding (which
ACE auto-upgrades to RunForward on relay) so future sessions don't
re-derive it.
- docs/ISSUES.md: file two new issues:
* #39 — Run↔Walk cycle transition not visible on observed
retail-driven player remotes when watched from acdream. Root cause
located: ApplyServerControlledVelocityCycle is gated by
IsPlayerGuid, excluding the exact case where ACE doesn't broadcast
a UM (shift toggle while direction key held). Fix sketch ~10
lines, separate commit. Cross-references the four-agent
investigation prompt.
* #40 — ACDREAM_INTERP_MANAGER=1 env-var path regressed. Documents
why (e94e791 conflated MoveOrTeleport with update_object), the
visible symptoms (staircase Z, position blips), and why
Commit B (039149a)'s ResolveWithTransition port was insufficient
(env-var path also clears body.Velocity → no horizontal Euler
motion → sweep input is queue catch-up only, which stair-steps).
Fix path = separate L.3 follow-up to re-integrate PositionManager
additively on top of the legacy chain.
Code:
- GameWindow.cs:6042: prepend a ⚠️ REGRESSED warning block at the top
of the env-var per-frame branch so anyone reading the code is
immediately aware not to enable it. Cross-references ISSUES.md #40.
- AnimationSequencer.cs: re-throttle [SCFAST]/[SCFULL] diagnostics to
0.5s per instance (rolled back from A.1's unthrottled experiment).
Already served its purpose; throttled is enough for steady-state
diagnostics. Restore _lastSetCycleDiagTime field.
No behavior change for any current launch (env-var unset = legacy
path unchanged). Build green; baseline test failures (8) unchanged
from prior commit, none introduced by this session.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Commit A's log refuted H2 (UPCYCLE never fires for player guids — gated
by IsPlayerGuid), H4 (SCNULLFALLBACK count = 0), H5 (PartTemplate
counts always match anim PartFrames). The remaining puzzle:
SCFULL Ready=23 dominates (all motions: 41 total)
SETCYCLE picker logged: only 9 transitions to Ready
Difference (≥14 extra Ready full-rebuilds) suggests a non-picker source,
OR many UMs arriving with no ForwardCommand bit being routed through
the picker's `else if (!command.HasValue) { fullMotion = Ready; }` at
GameWindow.cs:2671-2673, knocking the cycle back to Ready mid-Walk/Run.
This commit removes the 0.5s throttle on SCFAST and SCFULL (every call
now logs) and adds [UM_RAW] at OnLiveMotionUpdated entry to print:
- stance / fwd / fwdSpd / side / turn / movementType / isMoveTo
- sequencer.CurrentMotion at call time
per UM, gated on ACDREAM_REMOTE_VEL_DIAG=1.
Combined: one repro pass tells us (a) UM arrival rate per remote, (b)
which UMs lack ForwardCommand, (c) whether the picker is the source of
the 14+ extra Ready calls. Commit B is then a one-line fix.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds five diagnostics, no behavior changes. All gated on existing
ACDREAM_REMOTE_VEL_DIAG=1 env var. Plan at
~/.claude/plans/yes-make-a-plan-parsed-axolotl.md.
Five hypotheses surviving from the four-agent investigation
(docs/research/2026-05-03-remote-anim-cycle/investigation-prompt.md):
H1 SEQSTATE silently swallowed by OMEGA_DIAG sharing throttle clock
H2 ApplyServerControlledVelocityCycle races UM-driven SetCycle per UP
H3 SetCycle fast-path returns without updating _currNode
H4 GetLink/GetCycle null → defensive fallback lands on stale head
H5 PartTemplate.Count diverges from anim PartFrames.Count → silent
identity-quat freeze
Diagnostics added (all log lines are grep-prefixed):
D1 Split LastSeqStateLogTime field for SEQSTATE — own throttle.
Foundational: every other diag depends on SEQSTATE telling truth.
D2 [UPCYCLE] inside ApplyServerControlledVelocityCycle, +
[UPCYCLE_SRC] at the call site (wire vs synth velocity).
D3 [SCFAST] in fast-path return, [SCFULL] at full-rebuild end.
D4 [SCNULLFALLBACK] in the null-data defensive fallback.
D5 [PARTSDIAG] with pt.Count / seqFrames.Count / setup.Parts.Count /
anim.PartFrames[0].Frames.Count + sum-of-components hash.
Repro recipe:
$env:ACDREAM_INTERP_MANAGER = "1"
$env:ACDREAM_REMOTE_VEL_DIAG = "1"
dotnet run … 2>&1 | Tee-Object tools/diag-logs/walkrun-<ts>.log
Then watch a retail-driven character through acdream and exercise:
idle → W run → release → shift+W walk → release → demote → promote →
run+turn (this last one is the H1 trap).
Decision matrix in the plan file maps each [TAG] signature to a
specific Commit B fix.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
skip SubState commands in UM Commands list iteration
Two related fixes for the "remote-driven character animation cycle
does not visibly switch" bug:
1. AnimationSequencer.SetCycle now snapshots _queue.Last BEFORE
appending the new link/cycle nodes, then forces _currNode onto
preEnqueueTail.Next (= first newly-added node). Without this,
_currNode could stay pointing into stale non-cyclic head frames
left over from the previous cycle (typically a Walk_link or
Ready_link's tail), and the visible animation continues playing
those stale frames before the queue advances naturally to the
new cycle. Local player avoided the bug because
PlayerMovementController fires SetCycle in a tight per-input loop
that keeps the queue clean; remote player accumulates stale
link drains across many bundled UMs.
2. OnLiveMotionUpdated's UM Commands list iteration now skips
SubState class commands (high byte 0x40-0x4F like Ready
0x41000003). The router's SetCycle call for those would silently
override the animCycle picker's own SetCycle a few lines above
in the same UM packet — verified via SETCYCLE diag captures
showing run/walk being immediately re-cycled to Ready. Only
Action / Modifier / ChatEmote class commands (overlays that
interleave with the cycle) belong in this list iteration.
This fixed the landing-from-jump animation issue (user-confirmed:
"landing now works"). Walk↔run direct transitions still don't
visibly switch the leg cycle for observed retail-driven characters
even though ae.Sequencer.CurrentMotion correctly transitions
(per-tick SEQSTATE diag added — proves the sequencer's logical
state holds the right motion). Bug is somewhere downstream of
SetCycle's queue/state setup, possibly in Advance/BuildBlendedFrame
or in how seqFrames are applied to MeshRefs for remote entities.
Filed for next investigation.
Adds env-var-gated diagnostics (ACDREAM_REMOTE_VEL_DIAG=1):
CMD_LIST — what's in the UM's Commands list at receive time
HASCYCLE — whether the requested cycle exists in the dat
SEQSTATE — per-tick sequencer.CurrentMotion + CurrentSpeedMod
for the observed retail char (1Hz throttled)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Both changes were too aggressive:
1. Full queue reset on locomotion-locomotion transitions (c06b6c5)
— turned out the user's tests went through Ready (no direct
walk↔run transitions in the wire), so the fix never fired
and didn't address the actual bug.
2. Unconditional skip of every transition link
— killed ALL transition animations across the board (jump
landing, run-to-stop, sit-down, lie-down, etc.) for every
entity, not just the locomotion-locomotion case. User
correctly identified this as a much bigger regression.
Sequencer is back to pre-c06b6c5 baseline: ClearCyclicTail-only
on motion change, transition link enqueued normally. The
walk↔run-direct-transition issue (and the broader
remote-only-doesn't-update issue) remains open and requires a
different approach.
Confirmed regression isolation: local +Acdream's transitions in
acdream client work (visible legs switch correctly), and acdream
chars observed from a parallel retail client also have working
transitions. The bug is specifically when acdream observes a
RETAIL-driven character — somewhere in the inbound
UpdateMotion → animCycle picker → SetCycle path, the visible
cycle update is being lost. Filed for separate investigation.
Adds an env-var-gated HASCYCLE diagnostic in OnLiveMotionUpdated
that confirmed cycle resolution succeeds (HasCycle=True for both
RunForward 0x44000007 and WalkForward 0x45000005 on style
0x8000003D), so the bug isn't in MotionTable cycle lookup.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
When AnimationSequencer.SetCycle transitions between forward-locomotion
cycles (Walk↔Run, Walk↔WalkBackward, etc.) — i.e. when both old and new
motion's low byte is in {0x05 WalkForward, 0x06 WalkBackward, 0x07
RunForward} — do a full queue drain + _currNode/_firstCyclic reset
(matching the existing skipTransitionLink branch) instead of just
ClearCyclicTail. Without this, _currNode is left pointing into the
previous cycle's non-cyclic head (link frames from the prior Ready→walk
transition), and the visible legs continue playing those head frames
before reaching the new run cycle.
Investigation findings (cdb live trace of retail at
tools/cdb-scripts/walk_run_motion_trace.log):
Retail's actual approach is "additive add_to_queue with no truncate" —
MotionTableManager handles the natural progression via per-tick
CheckForCompletedMotions / remove_redundant_links cleanup. Acdream
doesn't have that machinery, so this fix is the closest viable
emulation: force the queue back to a clean state and rebuild from
scratch on the locomotion-cycle transition.
User-reported symptom this addresses (walk→run direct transition,
release shift while W held): visible animation cycle did not switch
until next motion event. Verified via FWD_WIRE + SETCYCLE diags that
both ACE and our SetCycle are firing correctly on the transition.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Replaces the hybrid that double-counted forward translation:
predicted body.Velocity (set per-tick by apply_current_movement) +
the seqVel-derived offset both pushed the remote body forward at
~11.7 m/s × dt for run, summing to ~23.4 m/s × dt — the user's
"way too fast" + 1-Hz blip.
Per the named-retail decomp investigation 2026-05-03 (research agent
report dispatched against acclient_2013_pseudo_c.txt for
CSequence::update + UpdatePositionInternal + UpdateObjectInternal +
adjust_offset, line citations in the env-var path comments):
CPhysicsObj::UpdateObjectInternal (0x005156b0)
→ UpdatePositionInternal (0x00512c30)
→ CPartArray::Update (writes anim root motion into the offset frame)
→ PositionManager::adjust_offset (REPLACES the offset with catch-up
when the body is far from the queue head; otherwise leaves the
anim root motion alone — Frame::operator=(arg2, &__return)
semantics, NOT additive)
→ Frame::combine (out = m_position + offset)
→ UpdatePhysicsInternal (out += body.Velocity × dt + 0.5·accel·dt²)
For a remote in steady-state RunForward where the server hasn't pushed
an explicit velocity, m_velocityVector ≈ 0 and ALL per-tick translation
comes from the animation root motion (CSequence::update_internal +
Frame::combine of crossed pos_frames keyframes). Our port doesn't
extract per-keyframe pos_frames from the .anm assets; instead
AnimationSequencer.CurrentVelocity is the synthesized equivalent
(RunAnimSpeed × ForwardSpeed averaged), passed through
PositionManager.ComputeOffset.
Concrete changes in the env-var (ACDREAM_INTERP_MANAGER=1) path:
* Pass seqVel = ae.Sequencer.CurrentVelocity to ComputeOffset (was
Vector3.Zero — that disabled the animation-root-motion source and
left only the queue catch-up to drive translation, which lagged
server pace).
* Clear rm.Body.Velocity to Vector3.Zero for grounded remotes each
tick. Mirrors retail's m_velocityVector ≈ 0 for remotes; prevents
UpdatePhysicsInternal from adding a second 11.7 m/s × dt on top of
the seqVel-driven translation.
* Stop calling apply_current_movement per tick. Retail only calls it
on motion-state changes (per cdb traces from the L.5 investigation),
not per physics tick. body.Velocity-based translation is now the
AIRBORNE-only path (gravity integration during jumps).
Also reverts an unacceptable "scaling hack" (per-tick body.Velocity
scaled by observed serverSpeed/predictedSpeed) the user explicitly
rejected as patching over an unsolved structural problem.
GetMaxSpeed reverted to RunAnimSpeed × rate (matches ACE
MotionInterp.cs:670-678; the earlier "return bare rate" change came
from a misread of an x87-decompiled get_max_speed where Binary Ninja
showed the return type as void).
AnimationSequencer.SetCycle now ALWAYS overwrites CurrentVelocity for
known locomotion cycles (Walk/WalkBackward/Run/SideStepRight/
SideStepLeft) instead of gating on `CurrentVelocity.LengthSquared() <
1e-9f`. The gate was correct for non-locomotion entities with
dat-baked HasVelocity, but for Humanoid where the dat is silent and
the only thing that could set CurrentVelocity before synthesis was a
transition link's HasVelocity flag, the gate would silently leave the
body advancing at the link's velocity instead of the cycle's intended
steady-state.
Adds wire-arrival diagnostics gated on ACDREAM_REMOTE_VEL_DIAG=1
(SETCYCLE, FWD_WIRE) used to trace the bug to ground truth.
User-confirmed improvements vs prior state:
- Steady-state run no longer "way too fast"
- Run-in-circles smoother (rectangle effect gone)
- Jump landing in correct location
- Turn-left visibly turns left
Outstanding (not addressed by this commit, deferred for next
investigation): walk↔run direct transitions don't visibly switch the
animation cycle until the next motion event fires. Both legacy and
new paths exhibit the same behavior, so the bug lives in the
SetCycle queue manipulation pipeline shared by both — not in the
per-tick translation path that this commit revises. Wire trace
confirms ACE delivers the WalkForward → RunForward transition
correctly and SetCycle does fire for it.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Multi-bug fix for the env-var-gated retail-faithful remote tick path
(ACDREAM_INTERP_MANAGER=1). Combines four previously-stacked defects
into one coherent rewrite:
1. PositionManager.ComputeOffset was additive (rootMotion + correction).
Retail's PositionManager::adjust_offset (acclient @ 0x00555190 →
InterpolationManager::adjust_offset @ 0x00555d30) REPLACES the
offset frame via Frame::operator=(arg2, &__return) when catch-up
engages — it does NOT add to the rootOffset that CPartArray::Update
wrote. Switched to "correction overrides root motion" semantics.
2. MotionInterpreter.GetMaxSpeed was returning RunAnimSpeed × rate
(~11.7 m/s for run skill 200). The retail decomp at
acclient_2013_pseudo_c.txt:305127 shows get_max_speed returns the
bare run rate (~2.94) — the function's float return rides the x87
FPU stack, which Binary Ninja shows as void. Caller multiplies by
2.0 to get the catch-up speed. With the wrong return our catch-up
was 23.5 m/s instead of retail's 5.88 m/s — the queue would walk
the body 4× too aggressively.
3. The env-var TickAnimations branch was DOUBLE-COUNTING forward
translation: it applied seqVel × dt via PositionManager.ComputeOffset
AND let UpdatePhysicsInternal advance body.Position += body.Velocity
× dt. Both were ~11.7 m/s for run, so body raced at 23.4 m/s —
"way too fast" per the user. Pass seqVel=Vector3.Zero to
ComputeOffset; let body.Velocity (refreshed per tick by
apply_current_movement) drive the bulk translation alone.
4. Body orientation only applied sequencer.CurrentOmega per tick. For
the running-in-circles case ACE broadcasts ForwardCommand=RunForward
AND TurnCommand=TurnLeft on the same UpdateMotion; the sequencer
picks the RunForward cycle whose synthesized CurrentOmega is zero,
so body never rotated between UPs and body.Velocity stayed in an
out-of-date world direction — the visible "rectangle when running
circles" effect. Prefer ObservedOmega (set explicitly in
OnLiveMotionUpdated from the wire's TurnCommand + signed TurnSpeed)
when present; fall back to seqOmega for standalone turn cycles.
Also adds:
- Sequencer-reset call in the env-var landing-fallback so the legs
un-fold from Falling on land (mirrors the legacy K-fix17 path).
- LastServerZ now only updates on IsGrounded UPs, so the per-tick
landing-fallback floor doesn't drift up to the player's airborne
peak Z and force-land mid-arc — fixes the user-reported "small
landing in the air before landing on the ground" when jumping
while moving.
- VEL_DIAG now samples at UP arrival with overlapping windows, plus
TURN_WIRE / OMEGA_DIAG / FWD_WIRE diagnostics gated on
ACDREAM_REMOTE_VEL_DIAG=1 used to trace these bugs to ground truth.
Verified via live retail-driven character observation 2026-05-03:
turn-left now rotates left (was animating right with snap), running
in circles is much smoother, jumping lands on ground (no mid-air
pause). Residual ~20% steady-state overshoot for walk remains —
WalkAnimSpeed=3.12 (decompiled retail constant) doesn't match ACE's
actual broadcast walk pace (~2.6 m/s). Tracked separately.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Three Option-A patches addressing visual issues from the L.3.1+L.3.2
remote-entity motion path (gated by ACDREAM_INTERP_MANAGER=1):
1. Landing fallback. ACE doesn't always send IsGrounded=true on the
landing frame, so airborne remotes kept falling under gravity and
visually "disappeared into the ground" until the next non-stop UP
forced a re-snap. Track the most recent server-broadcast Z on every
UP (including mid-arc airborne ones) and, in TickAnimations, snap
the body back up + clear airborne when its predicted Z drops more
than 0.5 m below that floor.
2. TurnLeft omega sign. The synthesize-omega fallback in
AnimationSequencer (used when MotionData ships without HasOmega)
had case 0x0E using zomega = +(pi/2) * adjustedSpeed, but
adjust_motion above already remapped 0x0E to 0x0D with
adjustedSpeed = -speedMod. The double-negate produced -Z (clockwise
= right) for both turn directions, matching the reported "turning
left animates as turning right". Use the same -(pi/2) * adjustedSpeed
formula as case 0x0D so the negation lands the result on +Z (CCW).
3. Velocity diagnostic. New env var ACDREAM_REMOTE_VEL_DIAG=1 prints
one line per moving remote per ~2 seconds comparing the sequencer's
CurrentVelocity to the server's effective broadcast pace
((LastServerPos - PrevServerPos) / dt). Lets us measure the
speed-overshoot ratio that produces the residual 1-Hz blippiness
before tuning a fix.
Refs Phase L.3.1+L.3.2 spec at
docs/superpowers/specs/2026-05-02-l3-remote-entity-motion-design.md.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Ports retail's CMotionInterp::get_max_speed (0x00527cb0). Returns
motion-table-derived max speed (m/s) for InterpretedState.ForwardCommand:
- RunForward: RunAnimSpeed (4.0) × (InqRunRate ?? MyRunRate)
- WalkForward: WalkAnimSpeed (3.12)
- WalkBackward: WalkAnimSpeed × 0.65 (BackwardsFactor from adjust_motion @ 0x00528010)
- otherwise: 0
Decomp note: Binary Ninja emits a spurious void return for x87 FPU-returning
functions; the actual float return is confirmed by both callers
(StickyManager::adjust_offset @ 0x00555430,
InterpolationManager::AdjustOffset @ 0x00555d52) which multiply the result
by 2.0 to produce a catch-up speed in m/s. The per-command switch is
consistent with get_state_velocity (0x00527d50) which uses the same constants.
Used by InterpolationManager.AdjustOffset in Task 5 as 2 × GetMaxSpeed().
Until Task 5 wires it, the method is unused — covered by 4 unit tests.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Addresses code-quality review findings on commit f43f168:
C-1: Stall detection re-implemented to match retail (acclient lines
353071-353275). Tracks _progressQuantum (sum of step values per window)
+ _distanceAtWindowStart (set at window start). Primary check:
cumulative_progress < MIN_DISTANCE_TO_REACH_POSITION (0.20m absolute).
Secondary check: cumulative_progress / _progressQuantum < 0.30.
Either failing increments fail counter; blip-to-tail at >3 consecutive
fails (already correct).
C-2: Renamed StallFailCountForBlip -> StallFailCountThreshold with
clearer XML doc explaining the > vs >= semantics (blip fires when fail
count EXCEEDS the threshold, i.e. on the 4th consecutive failed window).
I-1: _haveBaselineDistance sentinel prevents first-window false
positive that was triggering spurious fails on every new motion sequence
(old code defaulted _distanceAtWindowStart to 0, making cumulative
progress always negative on frame 5).
I-3: dt <= 0 || NaN guard at AdjustOffset entry prevents NaN
propagation into PhysicsBody.Position.
I-4: Internal field renames for clarity:
_failFrameCounter -> _framesSinceLastStallCheck
_failDistanceLastCheck -> merged into _distanceAtWindowStart
I-5: Added internal Count property + InternalsVisibleTo (via
AssemblyAttribute in .csproj) so Enqueue_DropsOldestWhenAtCap20
actually verifies cap enforcement. Added assertion that head is the
second-enqueued position after overflow.
3 new tests (AdjustOffset_FirstWindow_DoesNotFalseFail,
AdjustOffset_DtZeroOrNegative_ReturnsZero,
Enqueue_AtCap20_HeadIsSecondOriginal), 16 total. All green.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Pure-data class + 13 unit tests.
Ports retail's CPhysicsObj::InterpolateTo (acclient @ 0x005104F0)
and InterpolationManager::adjust_offset (@ 0x00555D30) — FIFO position-
waypoint queue (cap 20) + per-frame catch-up math walking the body
toward the head node at 2 × motion-table-max-speed (clamped, with
7.5 m/s fallback). Reach @ 0.05m. Duplicate-prune @ 0.05m.
Stall detection: every 5 frames; if progress < 30% of expected,
increment fail counter; > 3 fails → blip-to-TAIL (resolved via
decomp dive of UseTime @ 0x00555F20: tail_ is the snap target,
not head_).
Constants verified from binary at named addresses (not guesses):
MAX_INTERPOLATED_VELOCITY_MOD=2.0, MAX_INTERPOLATED_VELOCITY=7.5,
MIN_DISTANCE_TO_REACH_POSITION=0.20, DESIRED_DISTANCE=0.05.
Composed into RemoteMotion in subsequent task; not yet used.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Closes a multi-bug knot in player motion outbound + remote inbound,
discovered via cdb live trace of retail (2026-05-01) and follow-up
visual verification.
Outbound (acdream → ACE):
- JumpAction velocity is BODY-LOCAL, not world (per retail
CPhysicsObj::get_local_physics_velocity at 0x00512140 + ACE
Player.HandleActionJump's set_local_velocity call). Was sending
world; observers saw jump rotated by player yaw.
- Capture get_jump_v_z BEFORE LeaveGround() — the latter resets
JumpExtent to 0, after which get_jump_v_z returned 0. Was sending
Z=0 in every JumpAction.
- Backward/strafe-left jumps lost their horizontal velocity because
LeaveGround → get_state_velocity returns zero for non-canonical
motion (faithful to retail's FUN_00528960; retail papers over via
adjust_motion translation, not yet ported). Compute the correct
body-local launch velocity from input directly and push it back
into the body so local prediction matches what we send.
- IsRunning HoldKey was gated on `input.Run && input.Forward`, so
strafe-run and backward-run incorrectly broadcast as walk to
observers — ACE then animated walk + dead-reckoned at walk speed
while server position moved at run speed (visible as observer
lag). Fixed: gate on any active directional axis.
- AutonomousPosition heartbeat 0.2s → 1.0s to match holtburger's
AUTONOMOUS_POSITION_HEARTBEAT_INTERVAL and the ~1Hz observed in
retail trace.
- Heartbeat now fires while in-world regardless of motion state
(matches holtburger + retail's transient_state-based gate, not
motion-based). Pre-fix the at-rest heartbeat was suppressed.
Inbound (ACE → acdream, remote retail player):
- Remote backward walk arrives as cmd=WalkForward + speed=-1.91
(retail's adjust_motion'd form). Two bugs were stacking:
1. AnimationSequencer fast-path returned without updating when
sign(speedMod) flipped while motion stayed equal — kept playing
forward at old positive framerate. Fixed: bypass fast-path on
sign change so the full re-setup runs.
2. GameWindow clamped negative speedMod to 1.0 when stuffing
InterpretedState.ForwardSpeed, making get_state_velocity
produce forward velocity. Fixed: pass speedMod through verbatim
so the dead-reckoning body translates backward.
Issue #38 filed: 30Hz physics tick produces a chase-camera smoothness
regression at 60+ FPS render. Standard render-time interpolation is
the recommended fix (separate phase).
Findings + comparison vs retail/holtburger:
docs/research/2026-05-01-retail-motion-trace/findings.md
docs/research/2026-05-01-retail-motion-trace/fixes.md
TODO: port retail's adjust_motion (FUN_00528010) properly so
get_state_velocity works for all directions natively — would let us
drop the workaround in PlayerMovementController jump path and the
clamp in GameWindow.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Three intertwined changes from a single investigation session driven by
attaching cdb to a live retail acclient.exe (v11.4186, Sept 2013 EoR
build) and tracing what retail actually DOES on the steep-roof wedge
scenario the user reported in acdream.
═══════════════════════════════════════════════════════════
1. L.5 — physics-tick MinQuantum gate (PlayerMovementController)
═══════════════════════════════════════════════════════════
Retail's CPhysicsObj::update_object subdivides per-frame dt into 1/30 s
sized integration steps and SKIPS entirely when accumulated dt is below
MinQuantum. Live trace evidence:
update_object = 40,960 calls
UpdatePhysicsInternal = 25,087 calls (61%)
i.e., 39% of update_object calls return early via the MinQuantum gate.
Retail's effective physics tick rate is 30Hz even at 60+ Hz render.
acdream's PlayerMovementController bypassed the existing PhysicsBody.
update_object and called UpdatePhysicsInternal(dt) directly each render
frame, which compressed bounce-energy / gravity-tangent accumulation
into half the time and amplified our steep-roof wedge dynamics.
Fix: add `_physicsAccum` accumulator. Integrate only when accumulated
dt ≥ MinQuantum (clamped to MaxQuantum to bound stale-frame jumps).
HugeQuantum drops accumulated time to discard truly stale frames
(debugger break, GC pause). Render still runs at full rate; only the
physics step is gated.
═══════════════════════════════════════════════════════════
2. Phase 3 reset retail-faithful kill_velocity (TransitionTypes)
═══════════════════════════════════════════════════════════
Retail's reset path (acclient_2013_pseudo_c.txt:273231-273239) gates
kill_velocity on `last_known_contact_plane_valid`:
if (last_known_valid == 0) {
set_collision_normal(step_up_normal); return COLLIDED;
}
kill_velocity(this);
last_known_valid = 0;
return COLLIDED;
Earlier in this session I deviated to "unconditional kill_velocity" as
a hypothesis-driven wedge fix. The live trace then showed the
deviation CAUSED a different wedge by zeroing V every frame, leaving
the body with no tangent momentum to escape (V = (0,0,0) for 169
consecutive frames while position pre/resolved frozen). The retail-
faithful gate is restored.
Note: the gate rarely fires in normal airborne play because our L.2.4
proximity guard clears last_known_valid soon after the body separates
from its remembered floor. Live retail trace also showed
kill_velocity = 0 hits over an entire play session — same behavior. So
acdream's kill_velocity is correct as ported now.
The supporting ObjectInfo.VelocityKilled flag + StopVelocity wiring +
PhysicsEngine.ResolveWithTransition consumer that actually zeros
body.Velocity when the flag is set — these were a no-op stub before
this session and are now correctly wired. Retail anchor:
OBJECTINFO::kill_velocity → CPhysicsObj::set_velocity({0,0,0}, 0) at
acclient_2013_pseudo_c.txt:274467-274475.
═══════════════════════════════════════════════════════════
3. Retail debugger toolchain (#35)
═══════════════════════════════════════════════════════════
When the question is "what does retail actually DO at runtime?" — not
"what does retail's code SAY" — the decomp at docs/research/named-retail/
is invaluable but doesn't capture state interactions across frames.
This commit ships infrastructure to attach Windows' cdb.exe to a live
retail acclient.exe with full PDB symbols and capture state at any
breakpoint.
- tools/pdb-extract/check_exe_pdb.py — reads any PE's CodeView entry
and reports MATCH / MISMATCH against refs/acclient.pdb's GUID.
Always run before attaching cdb. The matching v11.4186 build's
GUID is 9e847e2f-777c-4bd9-886c-22256bb87f32.
- tools/pdb-extract/dump_pdb_info.py — dumps a PDB's expected
build timestamp + GUID + age. Used to figure out which acclient.exe
build pairs with our PDB.
CLAUDE.md gets a Step -1 in the development workflow ("ATTACH cdb
TO RETAIL when behavior is the question, not code") and a full
"Retail debugger toolchain" section with the workflow, sample .cdb
script structure, and watchouts (PDB names use snake_case for some
classes / PascalCase for CPhysicsObj; ; is cdb's command separator;
killing cdb kills the debuggee; high-hit-rate breakpoints lag the game).
memory/project_retail_debugger.md captures the workflow + key findings
so future sessions inherit the toolchain by reading project memory.
═══════════════════════════════════════════════════════════
4. BSPQuery Path 6 slide-tangent restored (b1af56e behavior)
═══════════════════════════════════════════════════════════
After this session's retail-strict experiments showed that retail-
faithful Path 6 (SetCollide + Phase 3 reset chain) produces a
"lands on roof in falling animation, can't slide off" half-state in
acdream — because our acdream port of step_up_slide / cliff_slide is
incomplete for grounded-on-steep movement — the L.4 slide-tangent
deviation from commit b1af56e is restored as the pragmatic ship state.
The deviation: when an airborne sphere hits a polygon whose normal Z
is below FloorZ (≈ 0.6642, slope > ~49°), project the move along the
steep face to remove the into-wall displacement, set CollisionNormal +
SlidingNormal, return Slid. Body never gets ContactPlane on the steep
poly, never gets the half-state, slides off the slope under gravity's
tangent contribution.
Retail-strict requires the deeper step_up_slide / cliff_slide audit
(filed under #32). Until that lands, slide-tangent is the right
deviation — produces user-acceptable "slide off the roof" behavior.
═══════════════════════════════════════════════════════════
Test status: 833/833 green.
Refs:
acclient_2013_pseudo_c.txt:283950 (CPhysicsObj::update_object)
acclient_2013_pseudo_c.txt:273231-273239 (Phase 3 reset path)
acclient_2013_pseudo_c.txt:274467-274475 (OBJECTINFO::kill_velocity)
acclient_2013_pseudo_c.txt:323783-323821 (BSPTREE::find_collisions Path 6)
Closes#35. Updates #32 with L.4/L.5 status.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Phase L.4 closes the "stuck in falling animation on a steep roof" bug
the user reported on 2026-04-30 ("I jump up, I land on it. It should not
even let me land, should just slide with a falling animation"). After
this commit the body no longer sticks to a steep roof when jumping
into it — it slides along the slope while keeping the falling animation.
Two pieces:
1. BSPQuery Path 6 steep-poly slide
When an airborne sphere hits a polygon whose world normal Z is below
FloorZ (≈ 0.6642, slope > ~49°), the previous flow was:
Path 6 SetCollide → Path 4 set_walkable → ContactPlane committed →
body "lands" on the steep poly with Contact bit + falling animation.
This left the player stuck mid-slope because OnWalkable was cleared
but Contact stayed set.
The new branch detects the steep normal in Path 6 BEFORE SetCollide
is called. Instead of entering the landing path, it removes the
into-wall component of the move (project onto the steep face), sets
CollisionNormal + SlidingNormal, and returns Slid. Same shape as
Path 5's step-up fallback and CylinderCollision. The resolver retries;
the sphere is now outside the poly; FindCollisions returns OK;
ValidateTransition commits the slid position. ContactPlane is never
set, so the body stays airborne with falling animation.
2. PlayerMovementController L.3a-bounce carve-out + Inelastic stop
Re-enables the velocity-reflection bounce when the contact normal is
upward-facing but steeper than walkable (0 < N.Z < FloorZ). The base
L.3a rule suppresses bounce on landing transitions to avoid micro-
bounce on flat terrain; that suppression also stuck the player to
too-steep roofs they shouldn't land on. This carve-out re-enables
the reflection specifically for the steep upward case.
Also lands related L.2c precipice / edge-slide work that was in flight:
- TransitionTypes EdgeSlideAfterStepDownFailed: walkable-poly-steep
cliff route + steep-ContactPlane cliff route ordering, so that
CliffSlide fires when the stored walkable polygon itself is too
steep (Path 4 had previously accepted it as a "landing" via the
permissive LandingZ threshold).
- CliffSlide reference-normal selection: prefer LastWalkable, fall back
to LastKnownContactPlane only when walkable, else use world-up. This
prevents the cross(steepN, steepN) = 0 degenerate case that left the
cliff slide as a no-op when both current and last-known were steep.
- Phase 2 / step-down branch / edge-slide branch / cliff-slide
diagnostic helpers gated on ACDREAM_DUMP_EDGE_SLIDE / ACDREAM_DUMP_STEEP_ROOF.
- Two new airborne-mover regression tests in BSPStepUpTests +
PhysicsEngineTests covering wall-slide and edge tangent motion.
DEVIATION FROM RETAIL — DOCUMENTED FOR FOLLOW-UP
The Path 6 steep slide is NOT what retail does. Retail's flow on the
same hit is:
Path 6 SetCollide (no steep check) → Path 4 find_walkable returns
nothing for steep → Phase 3 reset path: restore_check_pos +
kill_velocity → return COLLIDED → validate_transition reverts CheckPos
to CurPos and forces OK.
Net retail behavior: position reverts to pre-failed-move (typically
just below the roof in the common jump-up case), velocity zeroed,
gravity rebuilds Z next frame, body falls back down naturally with
the falling animation. The "freeze" framing I used earlier was wrong;
in the typical case retail just bounces the body off and lets gravity
take over.
Strict retail behavior would match the user's intent better in the
common case AND avoid the bounce-energy-accumulation we saw with the
slide-tangent approach (V grew to ~50 m/s in continuous-contact frames).
However, retail's behavior degenerates in the edge case of an overhead
landing onto a steep slope (body would freeze mid-air above the roof).
This commit ships the slide-tangent fix as an interim "much better"
state per user verification on 2026-04-30. Follow-up work to match
retail strictly: revert Path 6 steep-slide, audit Phase 3 reset to
ensure kill_velocity (matching OBJECTINFO::kill_velocity ->
CPhysicsObj::set_velocity({0,0,0}, 0)) actually fires, and re-test.
Refs:
- acclient_2013_pseudo_c.txt:323784-323821 (Path 6 SetCollide)
- acclient_2013_pseudo_c.txt:273191-273239 (Phase 3 reset path)
- acclient_2013_pseudo_c.txt:272563-272596 (validate_transition revert)
- acclient_2013_pseudo_c.txt:274467-274475 (kill_velocity)
- acclient_2013_pseudo_c.txt:282699-282715 (handle_all_collisions bounce)
Tests: 833/833 green.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
User-reported: "still don't slide down steep roofs" after the previous
trigger-gate fix (52e257d). Traced through the EdgeSlide dispatcher:
the gate IS firing now, but ValidateTransition's L.2.3i FloorZ test
clears OnWalkable as soon as the player is on a steep surface. So
EdgeSlideAfterStepDownFailed enters Branch 1 (`!OnWalkable → restore
+ OK`) and stops the player BEFORE Branch 2's steep-ContactPlane
CliffSlide can fire.
Re-order: check the steep-ContactPlane condition FIRST, before the
Branch 1 OnWalkable gate. If the surface is too steep AND we have a
contact plane on it AND the EdgeSlide flag is set, run CliffSlide
regardless of OnWalkable state. The cross-product deflection plus
gravity produces continuous downhill drift, frame after frame.
Branch 1's "stop at edge" still fires for the original case it was
meant for: walked off into thin air with no contact plane at all.
That should still stop (or fall normally) rather than CliffSlide
against nothing.
Tests: 1491 still pass.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Surprise discovery: CliffSlide, PrecipiceSlide, and
EdgeSlideAfterStepDownFailed are ALREADY in the codebase (landed
yesterday in the L.2c Codex commits — 1ec40f2). The trigger gate was
the missing piece for "sliding down steep roofs / steep terrain."
The step-down branch in TransitionalInsert (where
EdgeSlideAfterStepDownFailed gets called) was gated on
`!ci.ContactPlaneValid` only. That covers "player walked off a ledge,
no ground beneath them anymore" — but NOT "player standing on a
surface that's too steep to walk on."
For the latter case, Phase 1 of the resolver sets ContactPlane to the
slope's plane (geometric touch is enough to set it; no walkability
gate at that stage). So `ci.ContactPlaneValid` is true, just steep.
Old gate skipped → step-down never ran → EdgeSlide never fired →
CliffSlide never deflected the player.
New gate fires when ContactPlane is invalid OR Normal.Z < FloorZ.
The latter case lets step-down attempt to find a walkable surface
below; it fails (the slope is steeper than FloorZ all the way down);
EdgeSlideAfterStepDownFailed runs; Branch 2 (steep ContactPlane) fires
CliffSlide; player gets deflected horizontally. Gravity continues to
pull Z down — the combination produces the visible "slide down the
slope" behavior.
Mirrors retail's `transitional_insert` OK-path which (per agent
reports of acclient_2013_pseudo_c.txt:273191) ALWAYS runs the
step-down chain after a successful tentative move, regardless of
ContactPlane validity. Our two-condition gate approximates that.
Tests: 1491 still pass.
Live verification: walking onto a 60° slope or jumping onto a steep
roof should now slide the player downhill rather than letting them
stand there indefinitely.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Tried bumping calc_friction's gate from `dot >= 0f` to `dot >= 0.25f`
per retail acclient_2013_pseudo_c.txt:276705. Build green but
PlayerMovementControllerTests immediately showed forward motion
dropping from ~3m to ~0.16m over a 1-second simulated walk —
friction now hammers active locomotion in our architecture.
Root cause is deeper than a single threshold. Retail line 276702 has
a state-flag check (`(this->state & ...) == 0`) gating the friction
block that the decompile renders as a corrupted string and we didn't
fully characterize. Best read: retail skips this friction block while
locomotion is actively driving velocity, applying it only to residual
motion after locomotion stops. acdream's controller sets velocity
once per frame from input, then UpdatePhysicsInternal substeps friction
through it — at 0.25 threshold the substep compounding eats most of
the velocity before integration completes.
Reverting to the previous behavior (0.0 threshold). Filing the proper
investigation as L.3c-followup: needs to read retail's `(this->state &
...)` flag at acclient_2013_pseudo_c.txt:276702, identify whether
it gates on an active-locomotion bit, and either honor that gate or
restructure acdream's per-frame locomotion → integration ordering so
friction fires only on residual velocity.
Tests: 1491 still pass after revert.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Three independent research agents converged: retail's "bouncy walls"
feel comes from CPhysicsObj::handle_all_collisions (acclient_2013_pseudo_c.txt:
282699-282715, ACE PhysicsObj.cs:2692-2697) which applies the canonical
reflection v_new = v - (1 + e) * dot(v, n) * n to the body's velocity
after every transition resolves. Player elasticity = 0.05 (5% bounce);
INELASTIC_PS = 0x20000 zeros velocity entirely (used by spell projectiles).
acdream had the data plumbed (PhysicsBody.Elasticity = 0.05 was already
set, ci.CollisionNormal was being populated in 8+ code paths) but
ResolveWithTransition discarded the normal before returning. Hence
"sticky walls on jumps" — perpendicular velocity got removed by
SlideSphere's geometric resolution, but never reflected back, so
hitting a wall mid-jump zeroed forward motion entirely instead of
producing a small push-back.
Files:
- PhysicsBody.cs: add PhysicsStateFlags.Inelastic = 0x20000.
- ResolveResult.cs: surface CollisionNormalValid + CollisionNormal.
- PhysicsEngine.cs:599-624: copy ci.CollisionNormal into ResolveResult
before returning (both ok and partial paths).
- PlayerMovementController.cs:445-503: after position commit, apply
reflection per the retail formula. Inelastic → zero velocity;
else → reflect with v += n * -(dot(v,n) * (e + 1)).
apply_bounce rule (more conservative than retail by design):
- Sledding: retail's strict rule — bounce unless both grounded.
- Otherwise: bounce ONLY when both prev and now airborne. Suppress on
landing (prev air, now ground) to avoid micro-bouncing on floor —
the post-reflection upward Z defeats the controller's Velocity.Z<=0
landing-snap gate. Retail's elasticity 0.05 makes the artifact
visually imperceptible there; acdream's per-frame architecture
amplifies it.
Tests: 1491 → 1491 still pass (existing AirborneFrames + WalkOffLedge
tests confirmed the conservative apply_bounce rule keeps landings
clean).
Live verification needed: jump into a wall mid-air — should produce a
visible bounce-back rather than sticking. Walking along corridor with
side-clip should still slide. Landing should still settle without
micro-bounce.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Port the first retail precipice-slide slice from named retail/ACE: terrain and BSP walkable hits now preserve polygon vertices, failed step-down edges back-probe to rediscover the walkable polygon, and edge-slide can run precipice/cliff slide instead of only hard-stopping.
Adds pseudocode anchors plus regression coverage for terrain polygon context and loaded-terrain boundary edge-slide.
Co-authored-by: Codex <codex@openai.com>
