Three intertwined changes from a single investigation session driven by
attaching cdb to a live retail acclient.exe (v11.4186, Sept 2013 EoR
build) and tracing what retail actually DOES on the steep-roof wedge
scenario the user reported in acdream.
═══════════════════════════════════════════════════════════
1. L.5 — physics-tick MinQuantum gate (PlayerMovementController)
═══════════════════════════════════════════════════════════
Retail's CPhysicsObj::update_object subdivides per-frame dt into 1/30 s
sized integration steps and SKIPS entirely when accumulated dt is below
MinQuantum. Live trace evidence:
update_object = 40,960 calls
UpdatePhysicsInternal = 25,087 calls (61%)
i.e., 39% of update_object calls return early via the MinQuantum gate.
Retail's effective physics tick rate is 30Hz even at 60+ Hz render.
acdream's PlayerMovementController bypassed the existing PhysicsBody.
update_object and called UpdatePhysicsInternal(dt) directly each render
frame, which compressed bounce-energy / gravity-tangent accumulation
into half the time and amplified our steep-roof wedge dynamics.
Fix: add `_physicsAccum` accumulator. Integrate only when accumulated
dt ≥ MinQuantum (clamped to MaxQuantum to bound stale-frame jumps).
HugeQuantum drops accumulated time to discard truly stale frames
(debugger break, GC pause). Render still runs at full rate; only the
physics step is gated.
═══════════════════════════════════════════════════════════
2. Phase 3 reset retail-faithful kill_velocity (TransitionTypes)
═══════════════════════════════════════════════════════════
Retail's reset path (acclient_2013_pseudo_c.txt:273231-273239) gates
kill_velocity on `last_known_contact_plane_valid`:
if (last_known_valid == 0) {
set_collision_normal(step_up_normal); return COLLIDED;
}
kill_velocity(this);
last_known_valid = 0;
return COLLIDED;
Earlier in this session I deviated to "unconditional kill_velocity" as
a hypothesis-driven wedge fix. The live trace then showed the
deviation CAUSED a different wedge by zeroing V every frame, leaving
the body with no tangent momentum to escape (V = (0,0,0) for 169
consecutive frames while position pre/resolved frozen). The retail-
faithful gate is restored.
Note: the gate rarely fires in normal airborne play because our L.2.4
proximity guard clears last_known_valid soon after the body separates
from its remembered floor. Live retail trace also showed
kill_velocity = 0 hits over an entire play session — same behavior. So
acdream's kill_velocity is correct as ported now.
The supporting ObjectInfo.VelocityKilled flag + StopVelocity wiring +
PhysicsEngine.ResolveWithTransition consumer that actually zeros
body.Velocity when the flag is set — these were a no-op stub before
this session and are now correctly wired. Retail anchor:
OBJECTINFO::kill_velocity → CPhysicsObj::set_velocity({0,0,0}, 0) at
acclient_2013_pseudo_c.txt:274467-274475.
═══════════════════════════════════════════════════════════
3. Retail debugger toolchain (#35)
═══════════════════════════════════════════════════════════
When the question is "what does retail actually DO at runtime?" — not
"what does retail's code SAY" — the decomp at docs/research/named-retail/
is invaluable but doesn't capture state interactions across frames.
This commit ships infrastructure to attach Windows' cdb.exe to a live
retail acclient.exe with full PDB symbols and capture state at any
breakpoint.
- tools/pdb-extract/check_exe_pdb.py — reads any PE's CodeView entry
and reports MATCH / MISMATCH against refs/acclient.pdb's GUID.
Always run before attaching cdb. The matching v11.4186 build's
GUID is 9e847e2f-777c-4bd9-886c-22256bb87f32.
- tools/pdb-extract/dump_pdb_info.py — dumps a PDB's expected
build timestamp + GUID + age. Used to figure out which acclient.exe
build pairs with our PDB.
CLAUDE.md gets a Step -1 in the development workflow ("ATTACH cdb
TO RETAIL when behavior is the question, not code") and a full
"Retail debugger toolchain" section with the workflow, sample .cdb
script structure, and watchouts (PDB names use snake_case for some
classes / PascalCase for CPhysicsObj; ; is cdb's command separator;
killing cdb kills the debuggee; high-hit-rate breakpoints lag the game).
memory/project_retail_debugger.md captures the workflow + key findings
so future sessions inherit the toolchain by reading project memory.
═══════════════════════════════════════════════════════════
4. BSPQuery Path 6 slide-tangent restored (b1af56e behavior)
═══════════════════════════════════════════════════════════
After this session's retail-strict experiments showed that retail-
faithful Path 6 (SetCollide + Phase 3 reset chain) produces a
"lands on roof in falling animation, can't slide off" half-state in
acdream — because our acdream port of step_up_slide / cliff_slide is
incomplete for grounded-on-steep movement — the L.4 slide-tangent
deviation from commit b1af56e is restored as the pragmatic ship state.
The deviation: when an airborne sphere hits a polygon whose normal Z
is below FloorZ (≈ 0.6642, slope > ~49°), project the move along the
steep face to remove the into-wall displacement, set CollisionNormal +
SlidingNormal, return Slid. Body never gets ContactPlane on the steep
poly, never gets the half-state, slides off the slope under gravity's
tangent contribution.
Retail-strict requires the deeper step_up_slide / cliff_slide audit
(filed under #32). Until that lands, slide-tangent is the right
deviation — produces user-acceptable "slide off the roof" behavior.
═══════════════════════════════════════════════════════════
Test status: 833/833 green.
Refs:
acclient_2013_pseudo_c.txt:283950 (CPhysicsObj::update_object)
acclient_2013_pseudo_c.txt:273231-273239 (Phase 3 reset path)
acclient_2013_pseudo_c.txt:274467-274475 (OBJECTINFO::kill_velocity)
acclient_2013_pseudo_c.txt:323783-323821 (BSPTREE::find_collisions Path 6)
Closes#35. Updates #32 with L.4/L.5 status.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
235de3322a