Add UiChatView, a transcript widget for the retail-look UI: renders the
ChatVM tail bottom-pinned (newest at the bottom, like retail) with
mouse-wheel scrollback and whole-line vertical clipping so text stays
inside the frame. Hosted in a draggable/resizable UiNineSlicePanel and
wired into the UiHost next to the vitals window, fed by a dedicated
ChatVM (200-line tail) over the same live ChatLog. Per-ChatKind colour
palette (speech white, tells magenta, channels blue, system yellow,
emotes grey, combat orange).
This is the read-only foundation. The next sub-step adds glScissor
clipping + word-wrap, drag-to-select, and Ctrl+C copy -- the last needs
a CapturesPointerDrag opt-out on UiElement so an interior drag selects
text instead of moving the window (today an interior drag still moves
the window, same as the vitals panel).
Tests: UiChatView.ClampScroll (pin-to-bottom, cap-at-overflow,
never-negative).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Render each vital bar as a horizontal 3-slice from the real retail
RenderSurface sprites (authoritative ids from the vitals LayoutDesc
0x21000014 via dump-vitals-bars): a fixed-width bevelled left-cap, a
stretched glassy-gradient middle, and a fixed-width right-cap. The
empty back track draws full width; the coloured front fill grows from
the left to the value (the track owns the right end, so the fill omits
its own right-cap). Replaces the flat single-sprite Alphablend overlay
that read as the old UI - this is the bordered gradient look from the
retail screenshot (red HP / gold stamina / blue mana).
UiMeter gains the six 9-slice ids (BackLeft/Tile/Right +
FrontLeft/Tile/Right) and a DrawHBar helper; MarkupDocument parses the
backleft/backtile/backright/frontleft/fronttile/frontright attrs;
vitals.xml carries the 18 per-vital ids. The temporary
ACDREAM_BAR_PROVEOUT component grid is removed.
Adds AcDream.Cli render-vitals-mockup: a headless ImageSharp composite
that assembles the bars with the SAME DrawHBar logic, so the sprite
assembly can be verified by eye (Read the PNG) without launching the
client + server - the fast UI-iteration loop the user asked for.
export-ui-sprite dumps a single RenderSurface to PNG for HTML mockups.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
UiMeter gains SpriteResolve/BackSpriteId/FrontSpriteId; when both are
set, OnDraw draws the empty-track sprite full-width then the colored-fill
sprite UV-cropped to the live fill fraction (left-to-right drain). Falls
back to solid rects when sprite ids are absent, keeping existing behavior
and tests intact.
MarkupDocument.Build() parses `back`/`front` hex attrs on <meter> and
passes `resolve` into every UiMeter. vitals.xml wires the authoritative
LayoutDesc 0x21000014 sprites (Health 0x06005F3C/3D, Stamina 3E/3F,
Mana 40/41). The bar prove-out block in GameWindow.cs was already gone.
If the sprites decode as 1x1 magenta at runtime they are paletted
(INDEX16/P8) — the solid-color fallback will display instead and can be
investigated separately.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The anchor pass added in f911b5f runs on every element's children — including
UiRoot's children, which are the top-level WINDOWS. With the default Left|Top
anchor, ApplyAnchor reset each window's Left/Top/Width/Height back to its
captured design rect EVERY frame, so user move/resize was undone instantly ("I
can't resize or move it"). A window is user-positioned, so it must not be
anchor-managed by its parent: set UiNineSlicePanel.Anchors = None. Children
INSIDE the window still anchor to it (the bars keep stretching with width).
Regression tests: UiNineSlicePanel.Anchors == None; ApplyAnchor(None) is a no-op.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add AnchorEdges [Flags] enum and Anchors property (default Left|Top, so
all existing elements are unchanged) to UiElement. ApplyAnchor() captures
the design-time margins on first call then recomputes Left/Top/Width/Height
each frame; DrawSelfAndChildren drives it for every child before painting.
ComputeAnchoredRect is public + static so it can be unit-tested without a
running frame loop.
MarkupDocument.Build gains a private Anchor() CSV parser and threads it
into the <meter> initializer via the anchor= attribute.
vitals.xml: remove title="Vitals" (retail vitals has no heading) and add
anchor="left,top,right" to all three meter bars so they stretch when the
panel is dragged wider.
Two new xUnit tests in UiRootInputTests: Left+Right stretches width;
Left+Top only keeps fixed size. All 19 App.Tests green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add ResizeX/ResizeY bool properties to UiElement (both true by default).
HitEdges() in UiRoot masks out locked axes after edge detection, so a
locked edge falls through to window-move behaviour — matching retail,
where the vitals bar height is fixed and only widens.
MarkupDocument.Build() parses an optional resize="x|y|both|none"
attribute on <panel>; vitals.xml gets resize="x" to enforce the
horizontal-only constraint in all instances of the panel.
Two new tests: HitEdges_RespectsResizeAxisLock (UiRootInputTests) and
Build_ResizeAttrX_SetsHorizontalOnly (MarkupDocumentTests). 11/11 green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add parallel resize mode to the UiRoot retained-mode input state machine.
A left-drag starting within ResizeGrip=5px of a Resizable window's edge or
corner resizes it (min-size clamped); interior drags on a Draggable window
still reposition it.
Changes:
- UiElement: Resizable, MinWidth, MinHeight properties
- UiRoot: ResizeEdges flags enum; _resizeTarget state fields; FindWindow
(replaces FindDraggable, matches Draggable||Resizable); HitEdges (static,
internal, testable); ResizeRect (static, public, testable); OnMouseDown
checks edge-grip before move; OnMouseMove resize branch precedes move;
OnMouseUp clears _resizeTarget
- UiNineSlicePanel: Resizable = true (retail windows are resizable)
- UiRootInputTests: 4 new tests — ResizeRect_RightBottom, ResizeRect_LeftTop
(min-clamp + origin shift), HitEdges_DetectsCornerAndInteriorNone,
EdgeDrag_ResizesPanel_InteriorDragMoves (full integration path)
Note on test coordinate: right-edge grab uses x=298 (2px inside the panel's
hit-test boundary) rather than x=300 (exactly at edge, misses OnHitTest's
strict `<` check). This is intentional — the grip zone extends inward from
the edge boundary, so a click 2px inside correctly lands in both the
hit-test rect AND the resize-grip zone.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- UiElement: add Draggable flag; left-drag on a draggable element repositions
it as a floating window instead of starting a drag-drop sequence.
- UiRoot: add WantsMouse/WantsKeyboard properties (mirrors ImGui's WantCaptureMouse
pattern); add FindDraggable helper; inject _windowDragTarget state machine into
OnMouseDown/OnMouseMove/OnMouseUp so draggable windows track the pointer offset.
- UiNineSlicePanel: set Draggable=true so retail window frames are movable by default.
- GameWindow: OR _uiHost?.Root.WantsMouse|WantsKeyboard into the SilkMouseSource
wantCaptureMouse/wantCaptureKeyboard delegates and the direct MouseMove gate so
game actions (movement, world-pick) are suppressed while the pointer is over a
retail window — no double-handling with the InputDispatcher.
- GameWindow: wire all Silk Mice/Keyboards to UiHost after construction so the
UiRoot tree receives live input.
- Tests: 3 new UiRootInputTests covering WantsMouse hit-test, window-drag
reposition, and non-draggable panel immobility.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds the plugin-facing UI registration surface (Task 9, final D.2b task).
Plugins call host.Ui.AddMarkupPanel(path, binding) from Enable(); calls are
buffered in BufferedUiRegistry before the GL window opens, then drained into
UiHost.Root in GameWindow.OnLoad inside the RetailUi block after the first-
party vitals panel. Faulty plugin markup is isolated (try/catch per panel,
logged + skipped). IPluginHost.Ui added; AppPluginHost wired; StubHost in
Core.Tests updated; BufferedUiRegistryTests confirms drain-once semantics.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Implements Task 8 of the D.2b retail-UI plan. MarkupDocument.Build() parses
KSML-style panel markup into a live UiNineSlicePanel subtree, resolving
{Binding} attribute expressions against a supplied object via reflection.
Color format is #AARRGGBB (alpha-first, matching controls.ini). Handles
<panel> root (geometry + optional title label) and <meter> children (fill,
label, bar color). Future element kinds (label, button, image) extend the
switch without touching existing code.
vitals.xml encodes the just-approved vitals panel layout (health red #FFC70D0D,
stamina gold #FFD49E1F, mana blue #FF1F33D9); ships next to the binary via
PreserveNewest csproj rule. GameWindow.cs drops the 35-line hand-built panel
block in favour of a 4-line File.ReadAllText + MarkupDocument.Build call —
identical tree, identical render, now data-driven.
2 new tests (Build_CreatesPanelWithMeterFillLabelAndGeometry,
Build_NullBindingValuesYieldNullFillAndLabel) + 11 total targeted green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds ControlsIni — a minimal flat-INI reader for retail's controls.ini
(#AARRGGBB alpha-first color tokens; case-insensitive section/key lookup;
missing file returns an empty sheet with no throw). Wires the [title]
color token into the vitals panel's UiLabel in GameWindow.OnLoad, with
hardcoded white as the fallback. Visually a no-op (retail's [title] color
is white), but proves the stylesheet plumbing end-to-end (D.2b §7).
Three unit tests cover section parsing, #AARRGGBB decode, and graceful
missing-file handling.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds UiMeter, the horizontal vital-bar widget for the D.2b retail-look
UI toolkit. Solid-color fill for Spec 1; the retail orb sprite + scissor
crop path is reserved for a later sub-phase. Five unit tests (1 Fact +
4 Theory) cover half-fill geometry and clamping at -1/0/1/2 fractions.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Implements the retail floating-window bevel as a UiPanel subclass using
RetailChromeSprites: 4 tiled edges + 4 stretched corners + tiled center fill,
matching the 8-piece border layout confirmed by the D.2b Step-0 prove-out.
Resolver delegate keeps GL out of unit tests. Geometry verified by
ComputeFrameRects_PlacesCornersEdgesAndCenter (1/1 pass).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds two startup-time env toggles that Phase D.2b's retail-UI panel
frame will read:
- ACDREAM_RETAIL_UI=1 → opts.RetailUi (bool, default false)
- ACDREAM_AC_DIR=<path> → opts.AcDir (string?, default null)
Both follow the existing helper conventions (IsExactlyOne / NullIfEmpty).
No call sites broke because the only construction site in RuntimeOptions.cs
already uses named arguments.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
User re-gate 2026-06-12: ran past distant buildings, 'Seems to have
been fixed' - no flicker/vanish. The per-building flood-admission
bistability (#127, the building-flap mechanism behind the tower roof
flap and #123 'buildings vanish when running past') is gone.
Root: the bistable knife-edge admission died with the W=0
polyClipFinish clip port (987313a - the #119/#120 work that 'kills the
knife-edge class everywhere') plus the #120 containment-rejection
growth fix. The captured-pair evidence (tower-viewer-capture.log,
2026-06-11) PRE-dates all of those - it was that same near-eye knife
edge, not a separate distant mechanism.
Desk confirmation (both green at HEAD):
- CapturedFlipPair_AdmissionIsStable: the original 4 cm flip pair is
now |A|=|B| with zero diff across all FOVs and both pre-gate states.
- DistantBuildingStrafe_NoAdmissionChurn (new regression pin): 0
admission churn across all 21 building groups x {10,30,60,120,190} m
x 100 mm-step run-past strafes, both pre-gate states. A stable flood
toggles each cell at most once over a monotone eye path; this asserts
no cell toggles >=2x.
ISSUES.md #127 -> CLOSED with the DO-NOT-RETRY note (no re-opening the
BuildFromExterior seed gates for a flap symptom without a fresh HEAD
repro - the captured-pair lead is dead). Render digest banner updated.
Suites: App 264+1skip / Core 1443+2skip / UI 420 / Net 294.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The cellar-ascent grass window was the UNDERSIDE of the z~94 grade
sheet. Retail terrain is single-sided: ACRender::landPolysDraw
(0x006b7040) draws each land triangle ONLY when the camera is on the
POSITIVE (upper) side of its plane (Plane::which_side2 vs
Render::FrameCurrent, zFightTerrainAdjust bias) - a below-grade eye
gets NO terrain, so retail shows sky through the cellar door.
We inherited WB's frame-global cull DISABLE (WB GameScene.cs:841 - an
editor camera goes underground by design) and TerrainModernRenderer.Draw
set no cull state of its own -> terrain rasterized both sides. From a
below-grade eye every aperture sight-ray RISES, so the only 'terrain'
it can see is the grade sheet's underside - which painted the exit-door
aperture (the landscape slice's 2D NDC clip planes (nx,ny,0,dw) have no
depth axis and cannot exclude between-eye-and-portal geometry) and slid
off the door exactly as the eye crossed grade. Membership/viewer was
exonerated by the harness in the previous commit.
Fix: TerrainModernRenderer.Draw owns its cull state (the 7th
self-contained-GL-state instance): Enable(CullFace) + CullFace(Back) +
FrontFace(Ccw), set -> draw -> restore the frame-global CW + cull-off
baseline. GL backface culling evaluates retail's per-triangle eye-side
predicate at rasterization; no shader change.
Pins:
- LandblockMeshTests.Build_AllTriangles_WindCounterClockwiseInWorldXY:
every emitted triangle CCW in world XY across both FSplitNESW split
directions - the winding invariant culling depends on.
- TerrainCullOrientationTests: under the production camera convention
(LookAt up=+Z, Numerics perspective) an up-facing triangle winds CCW
in window space from above (kept) and CW from below (culled) - guards
FrontFace inversion, which would blank terrain from above.
Oracle note: retail's through-portal clip has NO portal-face near plane
(PView::GetClip / Render::set_view install edge planes only); nearer-
than-portal exclusion comes from the eye-side cull + cell-level
admission. No register row: this PORTS the retail mechanism, retiring
an undocumented WB-heritage deviation.
Gate pending: cellar climb (grass window gone) + outdoor sanity glance
(terrain intact from above).
Suites: App 263+1skip / Core 1443+2skip / UI 420 / Net 294.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The headless replay of the captured indoor frame proved the look-in flood ADMITS the porch 0x017A (Diagnostic_LookInFlood_AdmitsHallPorchFromCottage: 14 cells). So the portal (a SERVER object - the teleport proves it - with ParentCellId 0xA9B4017A) routes to partition.Dynamics and draws NOWHERE under an interior root: dynamics-last viewcone-culls it (the main cone has no look-in cells) and post-seal it would z-fail beyond the root's door plane (the #118 lesson). This is AP-33's own recorded deferral - 'look-in DYNAMICS are not drawn' - the deferred case was the most-stared-at object in town. Outdoors the merge path puts the porch in the main cone -> drawn -> 'appears when I walk out'.
Fix: DrawBuildingLookIns pass 2 draws look-in-cell dynamics with the statics (whole, AP-33 over-include) and their emitters ride the same DrawCellParticles call. No double-draw: dynamics-last keeps culling them; DrawDynamicsParticles only sees its cone survivors. #124 CLOSED by user gate same session. AP-33 row updated. Suites: App 261+1skip / Core 1439+2skip / UI 420 / Net 294 green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
unattached=0 in the last capture refuted the unattached hypothesis (the fix-1 pass is vacuous); the swirl outdoors rides a MATCHED attached emitter, so its owner is an OutdoorStatic keyed by a synthetic id. The matched-ids dump on an inside-vs-outside capture pair names the owner: the id that flips. Issue131SetupProbeTests dumps the outstage candidate setups from the dat.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
From inside a building, looking out at ANOTHER building with an opening
showed its back walls missing (see-through to the world): per-building
look-in floods only ran for outdoor roots; under an interior root the
far building's interior never flooded.
Decomp anchor (named-retail, this session's read): retail runs the
look-in INSIDE the landscape stage for ANY root - LScape::draw is the
FIRST call of PView::DrawCells' outside-view branch (pc:432719),
strictly BEFORE the depth clear (pc:432732) and the exit-portal seals
(pc:432785). ConstructView(CBldPortal) (0x005a59a0) clips each aperture
via GetClip against the INSTALLED view - the accumulated doorway region
when looked into from inside - and build_draw_portals_only pass 1
far-Z punches ALL apertures before pass 2 floods + draws any interior
cell. The nested DrawCells has an empty outside view (PView ctor
draw_landscape=0): no recursive landscape/clear/seal.
Port:
- GameWindow's per-building gather (frustum pre-gate on
Building.PortalBounds) now runs for interior roots too; the root's
own doorway self-excludes via the seed eye-side test (the eye is on
its interior side).
- PortalVisibilityBuilder.BuildFromExterior/ConstructViewBuilding gain
seedRegion - the installed-view clip: interior-root look-ins seed
against the OutsideView polygons (a building not visible through the
doorway never floods); null = full screen (outdoor roots unchanged).
- RetailPViewRenderer.DrawBuildingLookIns: a landscape-stage sub-pass
(before ClearDepthForInterior + seals) - per building, punch ALL
apertures (new DrawLookInPortalPunch callback, always forceFarZ=true,
closing the ISSUES "forceFarZ keys on root kind, under-punches" gap),
then draw the flooded cells' shells + statics far->near. Look-in
frames are NEVER merged into the main frame: a merged cell would draw
post-clear and z-fail against the root's seal (the old ledger
portShape sketch was wrong on this point).
- Look-in cells join the Prepare + partition set so shells have batches
and statics route to ByCell (consumed only by the sub-pass; the main
cell-object pass iterates the main flood's cells).
Register: AP-33 added in the same commit - look-in statics draw WHOLE
(no per-part viewcone; over-include is the safe direction) and look-in
DYNAMICS are deferred (an NPC inside a far building stays invisible -
retail draws objects per overlapped cell in the landscape stage).
Pins: Issue124LookInSeedRegionTests on the real corner-building door -
a seed region containing the aperture floods (and never more than the
full-screen seed), a disjoint region floods NOTHING, and an
interior-side eye never seeds its own exit portal.
Suites: App 259+1skip / Core 1439+2skip / UI 420 / Net 294 green.
Awaiting the user gate: far-building interiors visible through their
apertures from inside; #130 re-gate (top-edge strip) rides the same
launch.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The user's re-gate refuted the scissor fix as THE strip (6c4b6d6 was a
real but sub-pixel under-coverage): the strip survived, screenshot at a
doorway, full width of the opening, top edge only, "very subtle".
Root cause (pinned by Issue130DoorwayStripTests.UnliftedGate_*): the
+0.02 m shell render lift. Cell shells DRAW 2 cm above the dat origin
(z-fight vs coplanar terrain); f35cb8b (the #119-residual fix,
2026-06-11) deliberately reverted the VISIBILITY graph to the physics
(unlifted) transform - but the OutsideView color gate (terrain/sky/
scissor through the doorway) and the seal/punch depth fans are
DRAW-space consumers and kept projecting the unlifted polygons. The
drawn lintel therefore sits one lift-projection above the gate's top
edge - measured 6.7 px at a 2.4 m doorway - and that band never
receives terrain/sky color while the seal also stamps 2 cm low.
A regression from f35cb8b, NOT from the W=0 clip port (987313a stays
exonerated). Vertical aperture edges are immune (the lift slides them
along themselves) - top edge only, exactly as reported; explains the
"also NOW" timing precisely.
Fix - draw space draws lifted, visibility stays physics (the f35cb8b
invariant, now symmetric):
- PortalVisibilityBuilder.Build gains drawLiftZ: the exit-portal branch
projects the OutsideView region with the lifted transform; flood
admission, side tests, and CellViews are untouched (default 0 keeps
every existing visibility test bit-identical).
- The seal/punch fans (DrawRetailPViewPortalDepthWrite) lift their
world verts to the drawn shell's space.
- One shared constant PortalVisibilityBuilder.ShellDrawLiftZ feeds the
shell registration (GameWindow:5604), the gate, and the fans.
Register: AP-32 ADDED - the +0.02 lift had NO row (a pre-register
deviation the 2026-06-12 sweep missed). The row records the split
invariant both ways: a draw-space consumer that forgets the lift
re-opens the #130 strip; a visibility consumer that picks the lifted
transform re-opens the #119-residual side-cull.
Pins: the lifted gate covers the drawn (lifted) aperture to 0.00 px
across the 147-combo sweep; the unlifted gate shows the 6.7 px strip
(sensitivity proof - if the lift is ever removed, this test says the
drawLiftZ plumbing can go too).
Suites: App 257+1skip / Core 1439+2skip / UI 420 / Net 294 green.
Awaiting the user re-gate at a doorway with the lintel on screen.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The user's "doors/doorways leak through terrain and houses over a
landblock" is the #117 mark-pass bias evaluated in the wrong space.
Mechanism (confirmed analytically, Issue129PunchBiasTests): the punch's
pass-A stencil mark biased the aperture fan toward the viewer by a
CONSTANT 0.0005 NDC. NDC depth is non-linear - a constant NDC bias b
spans ~= b*d^2*(f-n)/(f*n) meters of eye depth at eye distance d. With
retail's znear 0.1 (d4b5c71) that is 0.125 m at 5 m but ~190 m at one
landblock: every hill/house in front of a distant aperture passed the
LEQUAL mark and was far-Z punched -> door-shaped leak through the
occluder. This is exactly the risk AD-18's register row recorded
("an occluder within ~bias in front of a distant aperture gets punched
through") - the symptom-scan rule found it before instrumentation.
Fix: cap the bias's EYE-SPACE span at 0.5 m -
biasNdc(d) = min(0.0005, capMeters * near / d^2)
in the mark-pass vertex shader (clipPos.w = eye depth), CPU-mirrored as
PortalDepthMaskRenderer.MarkBiasNdc for tests. Below the ~10 m
crossover the constant-NDC term is smaller and wins - bit-identical to
the T5-validated close-range behavior, so the #108 grass coverage that
justified the bias is untouched. Beyond it the punch can never reach an
occluder more than 0.5 m in front of the aperture plane.
Pins (Issue129PunchBiasTests): the old form spans >100 m of eye depth
at a landblock (the leak, kept as documentation of the refuted shape);
the capped form stays <= 0.5 m at every distance 1-400 m and matches
the validated constant bit-for-bit below 10 m.
AD-18 register row updated in the same commit (bias description + the
#129 closure + the residual risk note: door-hugging geometry beyond the
0.5 m cap at >10 m viewing range re-occludes - the cap constant is the
tuning knob if the gate shows residue).
Suites: App 256+1skip / Core 1439+2skip / UI 420 / Net 294 green.
Awaiting the user visual gate at the original spot (+ #108 cellar
re-check up close).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The user's "thin strip of background color along the TOP outer edge of a
doorway, looking out from inside" is the landscape-slice scissor box, not
the W=0 clip port.
Mechanism (pinned headlessly, Issue130DoorwayStripTests, 147 eye/gaze
combos at the real Holtburg A9B4 0x0170 exit door):
- BeginDoorwayScissor converted the slice NDC AABB to pixels as
Floor(origin) + Ceiling(size). The far edge floor(min)+ceil(max-min)
lands up to ONE PIXEL SHORT of the true top/right edge at unlucky
fractional alignments (captured: top edge y=0.7938 @1080p -> row 968
cut; right edge column 1296 @1920 cut).
- The scissor brackets the ENTIRE landscape slice (sky, terrain, outdoor
statics, weather). The exit-portal SEAL stamps the full raw aperture at
true depth and the shell wall ends at the aperture edge, so the cut row
never receives any color write -> clear color, flickering with eye
movement as the fractional alignment shifts.
- This violated AD-17's own invariant (over-inclusion is safe,
UNDER-inclusion is the bug class). No register change: the fix restores
the row's documented doctrine.
Lead 1 (987313a W=0 clip port regression) REFUTED by the same harness:
the CPU polygon pipeline (ProjectToClip -> ClipToRegion merges ->
ClipPlaneSet planes) is sub-pixel exact against the raw aperture
projection (worst 0.54 px, 0.00 px aligned). For an all-in-front doorway
polygon the port is bit-identical to the old 1e-4 path by construction.
The EyeInsidePortalOpening rescue stays deleted.
Fix: conservative outer bound floor(min)/ceil(max) extracted to
NdcScissorRect.ToPixels (GL-free; containment property proven in the
header comment); BeginDoorwayScissor delegates.
Pins:
- NdcScissorRectTests: center-inside containment across 251 fractional
alignments x 2 framebuffer sizes + both captured regression cases.
- Issue130DoorwayStripTests: production flood + assembler at the real
exit door; asserts the scissor never cuts a plane-admitted fragment
(worstScissorGap 0.00 px post-fix, was 10.8 px capped) and the CPU
pipeline stays sub-pixel exact (canary 1.2 px).
Suites: App 252+1skip / Core 1439+2skip / UI 420 / Net 294 green.
Awaiting the user visual gate at a cottage doorway.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Ports retail ACRender::polyClipFinish (0x006b6d00, pc:702749) near-eye
semantics into PortalProjection.ProjectToClip - the fundamental fix for
the in-plane portal clip family (climb strobes, tower-top roof/floor
flap while turning; live-corroborated this session: [viewer-diff]
0xAAB30108 strobing 27x mid-climb, whole interior dropping at the top).
Pseudocode: docs/research/2026-06-11-polyclipfinish-w0-clip-pseudocode.md.
Three legs, all decomp-driven:
1. ProjectToClip clips at w >= 0 EXACTLY (was EyePlaneW=1e-4), with
retail's any-negative-w gate. Boundary intersections land at w == 0
(homogeneous directions), so a portal the eye is CROSSING yields the
correct unbounded half-region that the bounded view-region clip cuts
to the screen. A w=0 vertex cannot survive a bounded region clip
into the divide (direction fails some edge of any bounded convex
region); the measure-zero corner case is guarded non-finite->empty.
2. CellView.CanonicalKey keys ALL-COLLINEAR (zero-area) views as their
snapped segment ("L:" + extremes) instead of rejecting them - retail
PROPAGATES degenerate views (ClipPortals decomp:433651-433711
forwards any count!=0 GetClip output, no area gate anywhere), keeping
the cell behind an exactly-in-plane portal in the draw list (cells
draw whole; onward floods die naturally). Rejection dropped the
whole chain for the frame - the parked-eye knife-edge band. Finite
key space unchanged -> dedup + strict-growth convergence intact.
3. The EyeInsidePortalOpening rescue is DELETED (the T2-documented
compensation for the 1e-4 divergence) along with EyeStandingPerpDist
+ PointInPoly2D. Empty clip = no flood, period (retail's rule).
CornerFloodReplay - the gate that REFUTED the previous deletion
attempt - passes WITHOUT the rescue under the W=0 port.
Harness criterion corrected to retail's rules (it codified the rescue):
cells fully BEHIND the camera are not required (all-behind portals clip
empty in retail); monotone area holds per root regime; the two
manufactured exact-on-plane steps assert root-only (boundary root pick
is ambiguous; the in-plane portal there is ~perpendicular to the gaze =
genuinely off-screen). Build_CollapsedInteriorPortalNearEye test
inverted to pin the retail empty-clip rule (it pinned the rescue).
New pins: eye-crossing portal -> w==0 boundary verts + half-region (not
sliver); gaze-along-plane degenerate view accepted + segment-key dedup;
non-finite guard. Replay harnesses (CornerFloodReplay, Issue120,
TowerAscent, HouseExit, Issue127) all green.
Suites: App 246+1skip / Core 1430+2skip / UI 420 / Net 294.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The live capture pinned it end to end. BuildInteriorEntitiesForStreaming
lifts the render-side cell transform +0.02 m Z (shell z-fighting vs
terrain - a DRAW concern) and passed that LIFTED transform to
BuildLoadedCell, so every plane in the visibility graph sat 2 cm high.
The portal side test's in-plane window is +-10 mm: an eye standing ON a
floor containing a HORIZONTAL portal (the tower's deck lip 010A->0107,
stair landings, cellar mouths) sits 0-10 mm above the TRUE plane = 10-20
mm BELOW the lifted plane -> outside the window -> the cell behind the
portal side-culled out of the flood. Captured live at the stair top:
root=0xAAB3010A eye z=126.803 vs the portal plane at 126.80, flood=1,
0x0107 (the whole tower interior incl. the staircase) dropped WHILE THE
GAZE LOOKED STRAIGHT AT IT - "stairs disappear and you can walk on
them", and the roof/edge flap as the gaze swung the marginal admissions.
Vertical doorways were immune (the lift slides their planes along
themselves) - exactly why this hit stairs/decks/floors and not doors.
Chase chain (the apparatus did all the work): [viewer] print-on-change
probe with eye@mm -> the user's climb capture -> [viewer-diff] naming
the dropped cells per flip -> headless replay of the exact captured
(eye,fwd) frame: healthy UNLIFTED, reproduces ONLY with the production
lift -> gate-by-gate diagnostic (side test dot=+0.003 unlifted vs
-0.017 lifted; clip + rescue exonerated; knife-edge z-sweep all-stable,
killing the float-chaos theory).
Fix: BuildLoadedCell receives the PHYSICS (unlifted) transform; the
drawn shells keep their lift. The seal/punch fans (which read the
visibility LoadedCell's WorldTransform) now stamp TRUE depth - MORE
consistent with the unlifted terrain they protect.
Pins: CapturedTopOfStairs_MainCellStaysInFlood - arm 1 (unlifted =
post-fix production) asserts the main cell admitted at the captured
frame; arm 2 (lifted) is the mechanism canary asserting the drop, with
instructions if it ever starts passing. Plus the gate-by-gate
diagnostic + knife-edge sweep as the investigation record.
Also this session: Issue127FloodFlipReplayTests (the captured 4 cm
outdoor flip pair replays STABLE across fovs/pre-gate arms - the
outdoor churn is NOT the flood math; remaining #127 = distant-building
admission churn, lower priority now that the tower-cell drops are
explained by the lift), and the [viewer-diff] probe (per-flip added/
removed cell naming - keep, it found this).
Suites: App 242+1skip, Core 1422+2skip, UI 420, Net 294.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
User verdict on the post-#120 build: "Barrel is gone and more stairs
exist" - the #120 fix partially cured the tower, and the earlier
"legit dat barrels on the landings" claim is RETRACTED (USER AXIOM: the
barrel is NOT in the tower in retail; what the user saw was itself a
render artifact of the corrupted floods, and what the 0x020005D8 cell
statics actually render as is unverified - do not assume barrel).
Remaining tower bugs, both PINNED by TowerAscentReplayTests (the #118
exit-walk pattern, vertical - a helix ascent with the gaze locked ON
the staircase, so a cull has no gaze excuse):
- steps 195-201 (eye z 126.9-127.3, the roof-lip band between the main
cell's ceiling at 126.8 and the roof aperture plane at ~127.2) resolve
OUTDOOR and the per-building exterior flood admits NOTHING (flood=1 =
the outdoor node alone): the eye is above every side aperture's useful
view and ON/INSIDE the roof aperture's plane, so BuildFromExterior's
seed side-test / in-plane reject refuses every exit portal. The tower
interior never floods -> the staircase (a 0x0107 static) cone-culls
while staying walkable (user symptom 1), and the roof-lip cell
geometry flaps as the live eye bobs across the band's edges (user
symptom 2). One mechanism, both symptoms.
- The pin is committed as a SKIPPED red test
(TowerAscent_StaircaseStaysConeVisible_EveryStep; the skip reason
carries the defect) so the suite stays green - un-skip with the fix.
- TowerAscent_RootDoesNotPingPong + the per-step diagnostic stay active.
Fix direction (oracle-first, next): determine which side diverges from
retail - (a) viewer-cell resolution (retail curr_cell may keep the eye
INTERIOR through the band: keep-curr above open-top cells / cell BSP
classifying the parapet bowl as inside 0x010A, where our resolution
demotes to outdoor), or (b) exterior seed admission (retail
ConstructView(CBldPortal) Sidedness with an in-plane eye). Grep the
named decomp for both before touching either layer.
Suites: App 238 + 1 skip (236+3 new, 1 pinned), Core 1419+2skip,
UI 420, Net 294.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The armed tripwire self-attributed on the re-gate launch
(regate-118-119-launch.log): a pure TWO-CELL reciprocal ping-pong, 64 laps
each - chain root=0xA9B4015C eye=(109.995,37.158,96.249) cells 0162x64
015Cx64, and root=0xA9B3010F eye=(175.771,-107.310,118.814) cells 0103x64
010Fx64 (A9B3 = the hill cottage the user reports going all-transparent on
entry - likely the same mechanism, verify at the next gate).
Mechanism: with the eye within PortalSideEpsilon (+-1 cm; the T2
refuted-to-tighten root-lag tolerance - retail's is 0.0002) of a portal
plane, the in-plane case counts as interior for BOTH cells, so views lap
A->B->A...; each lap re-clips through two near-edge-on apertures whose
intersection numerics wobble by more than CellView's 1e-3 dedup grid, so
every lap keys as NEW and the in-place growth recurses to the depth-128
failsafe. The prior convergence sweeps could not reproduce because they
only load the corner building 0x016F-0x0175 - both firing pairs are
outside that set. Issue120ReciprocalPingPongTests loads the full
landblock's interior cells and drives the +-epsilon window directly:
deterministic firings + 65-polygon CellView piles pre-fix.
Fix (the handoff's own predicted class - dedup admitting near-duplicates
per lap, NOT a limit tune): CellView.Add rejects a polygon CONTAINED in
one already stored (convex edge test, DedupGridNdc slack). A round-trip
re-emission is, in exact arithmetic, a SUBSET of the polygon that
originated it - containment rejection makes union growth strictly
area-increasing, so no new visible area means no propagation. Bonus:
back-emission into a full-screen view (the root cell) now always rejects.
The corner-flood completeness pins stay green - no real region is dropped.
Suites: App 236 (232+4), Core 1419+2skip, UI 420, Net 294.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Root cause (pinned by the new deterministic exit-walk harness, NOT guessed):
under an interior render root, the exit-portal SEAL stamps the door fan at
TRUE depth after the gated full depth clear, and T1's "ALL dynamics last"
pass then drew the outdoor-classified player depth-tested - every fragment
beyond the door plane z-failed against the seal across the whole aperture.
Harness measured the full window: from the moment the sphere center crosses
the plane until the eye follows (~2.6 m of camera lag, ~2.2 s at walk speed)
the player is invisible; while straddling, the beyond-plane body half clips
at the plane. The handoff's three cone-level candidates are all EXONERATED:
the cone walk passes every step; (eye, ViewerCellId) come from the same
SweepEye call with camera-update-before-visibility-read in the same frame;
the side-test window is sub-epsilon under healthy resolution.
Retail oracle (grep-named-first): PView::DrawCells 0x005a4840 runs
LScape::draw FIRST (pc:432719), then the gated depth clear (pc:432731-32)
and the exit-portal seals (pc:432785-86); outdoor cell objects draw inside
the landscape stage (DrawBlock 0x005a17c0 -> DrawSortCell pc:430124), and
an object draws once per overlapped shadow cell (pc:430056-64) - the
straddling body composes from both stages, neither half clips.
Fix: RetailPViewRenderer assigns dynamics to the OUTSIDE stage under an
interior root when outdoor-classified OR sphere-straddling an exit-portal
plane of their flood-visible cell (DynamicDrawsInOutsideStage - pure, the
harness drives it as the ordering contract); they ride the landscape slice
draw (pre-clear, seal-protected) with the same per-slice cone test as
outdoor statics. Indoor dynamics keep the last pass (retail loop C);
straddlers draw in both (retail shadow dual-draw). Outdoor roots keep
all-dynamics-last - the BR-2 punch-after-dynamics lesson (88be519) stands.
Apparatus: HouseExitWalkReplayTests - dat-backed corner-building exit walk
driving the production stack headlessly (RetailChaseCamera damping ->
healthy-sweep viewer resolution -> PortalVisibilityBuilder.Build ->
ClipFrameAssembler -> ViewconeCuller -> the DrawDynamicsLast predicate +
a CPU seal-depth model). 5 tests: cone pin, seal-depth pin, straddle
dual-draw pin, per-step table, stale-root window quantifier (#118 cand 2).
Suites: App 232 (227+5), Core 1416+2skip, UI 420, Net 294.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Investigation: retail's growth propagation RECURSES natively too
(AddViewToPortals -> FixCellList -> AdjustCellView -> AddViewToPortals,
Ghidra 0x005a52d0/0x005a5250/0x005a5770, no depth guard) - the in-place
recursion shape is faithful; retail's safety is fast convergence. Our
depth-128 firing means slow/non-saturating growth (each lap of a portal
cycle nests one recursion level), not necessarily a true infinite loop.
Two dat-backed sweeps over the corner-building cell set could NOT
reproduce the T5 firing:
- PortalPlaneCrossings_InPlacePropagationConverges: +/-6cm eye sweep
across every portal plane, seeded from both sides.
- InCellDirectionSweep_InPlacePropagationConverges: 3024 builds, in-cell
eye grid x 8 yaw x 3 pitch (the walking-and-turning regime).
Both pass with 0 firings -> production-only ingredients suspected (full
lookup graph - one T5 firing was 0x0162, another building - and/or the
real camera path).
Armed: PortalVisibilityBuilder.ConvergenceTripwireCount (test
observable, both Build + look-in sites) + DumpPropagationChain - on the
next firing the log carries root cell, eye, per-cell frequency summary,
and the 24-entry chain tail, so the cycle's structure (A<->B ping-pong
vs 3-cycle laps) reads directly off the output. Both sweeps stay as
regression pins.
App tests: 227 green (was 225; +2 pins).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The A6.P4 port, fused into one installment per the BR-2 half-port lesson
(registration and query are co-dependent: flood-registering shells under
the old radial query would re-open #98 through the vestibule).
REGISTRATION (ShadowObjectRegistry rewritten):
- Register/RegisterMultiPart/UpdatePosition compute the cell set via
CellTransit.BuildShadowCellSet (the C2 find_cell_list flood) seeded by
the entity's m_position cell id; the private 24m XY-grid rectangle and
its single-landblock clamp are deleted. Flood spheres follow retail's
CylSphere rule (base point + cyl radius, cap 10; BSP bounding-sphere
fallback - Ghidra 0x0052b9f0). Statics flood with the do_not_load
prune; dynamics (server spawns, isStatic:false) without.
- Keep-when-empty (SetPositionInternal num_cells gate, pc:283540): a
failed flood leaves the previous registration in place.
- RefloodLandblock: streaming-race hook re-runs the flood when a
landblock's cells hydrate (retail init_objects -> recalc_cross_cells,
Ghidra 0x0052b420/0x00515a30); wired at GameWindow's hydration tail.
- GameWindow sites pass the server position's full cell id as the seed
(spawn + UpdatePosition); the five static sites pass ParentCellId.
BUILDING CHANNEL (CSortCell.building shape):
- Building SHELLS are not shadow objects in retail (only caller of
find_building_collisions is CSortCell::find_collisions 0x005340aa;
one building per origin landcell, init_buildings 0x0052fd80 verified
verbatim + ACE cross-ref). IsBuildingShell entities skip the registry;
Transition.FindBuildingCollisions runs the shell part-0 BSP off
cache.GetBuilding(cellId) with bldg_check set around it
(find_building_collisions 0x006b5300), CollidedWithEnvironment on
non-Contact non-OK. BuildingPhysics.ModelId = pre-resolved part-0
GfxObj (0x02 Setups resolved at the CacheBuilding site).
- Placement/ethereal weakening: BSPQuery Path 1 passes center_solid=0
when BldgCheck && HitsInteriorCell (BSPTREE::find_collisions 0x0053a82e
+ placement_insert 0x005399d8) so doorway crossings don't hard-fail
against shell solids. SpherePath gains both retail fields;
HitsInteriorCell is rebuilt at every cell-array build
(build_cell_array reset 0x00509ef2 + find_cell_list/check_building_
transit set sites).
QUERY (retail per-cell order, transitional_insert 0x0050b6f0):
- TransitionalInsert per attempt: env -> building (LandCell only) ->
objects on the PRIMARY cell, then on OK the check_other_cells pass
(env -> building -> objects per OTHER overlapped cell) + the
carried-cell advance - the advance now happens AFTER all per-cell
object passes (the WF1 ordering divergence), with Adjusted/Slid
feeding the retry exactly like retail's OK_TS case.
- FindObjCollisionsInCell = CObjCell::find_obj_collisions (0x0052b750):
iterate ONLY the asked cell's list. DELETED: the radial 9-landblock
sweep, the +5m query pad, the b3ce505 indoor-primary gate, and the
isViewer exemption (the camera is bounded by interior cell-BSP env
collision - retail's own channel; CameraCornerSealReplayTests pins it
against real dat, and the new building-channel camera test pins the
outdoor stop).
TESTS: Core 1416/0/2 (was 1398 + 4 pre-existing #99-era fails + 1 skip),
App 225, UI 420, Net 294 - all green.
- 3 of the 4 #99-era reds flipped green as designed: the door apparatus
(Apparatus_Grounded_50cmOffCenter_FrontApproach_Blocks) and tick-13558
(indoor walkthrough) now assert the door BLOCKS; tick-22760 pins the
outdoor blocking invariant.
- The 4th (BSPStepUp D4) + 22760's lateral-slide delta are NOT cell-set
problems (probes prove the door is found + BSP-only dispatched;
BR-7 left both byte-identical) - filed as issue #116 (slide-response
family), D4 skipped with the issue reference.
- FindEnvCollisionsMultiCellTests migrated to the public entry (the A4
multi-cell halt now lives at the retail call site).
- New registry pins: per-cell query surface, outdoor-footprint-never-
indoor (#98 architectural), door-outdoor-cell membership, reflood.
- CameraCollisionIndoorTests rewritten against the building channel
(the isViewer-exemption pins died with the exemption).
Closes#99 (doors block both ways via registration-time cell membership
+ the straddle-spanning player cell array). #97 likely closed (the +5m
radial pad that produced phantom-collision candidates is gone) - verify
at T5. #98 stays closed ARCHITECTURALLY (outdoor footprints structurally
cannot reach interior cells; the cellar harness stays green).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The complete retail drawing order in one installment (per the amended plan:
every installment is a COMPLETE retail behavior - the half-ported punch of
88be519 is re-landed here WITH the ordering that makes it correct):
static world (sky/terrain/weather/shells/scenery)
-> aperture depth writes (interior SEAL at true depth / outdoor+look-in
PUNCH to far-Z; PortalDepthMaskRenderer, DrawPortalPolyInternal
Ghidra 0x0059bc90)
-> interior cells WHOLE, far-to-near, drawn once (DrawCells Loop 2,
Ghidra 0x005a4840; use_built_mesh pc:427905)
-> per-cell STATIC object lists
-> ALL dynamics LAST (DrawDynamicsLast), depth-tested, never hard-clipped
InteriorEntityPartition: new contract - every ServerGuid != 0 entity goes
to Dynamics regardless of cell (indoor/outdoor/unresolved/hidden); ByCell
carries only dat-baked indoor statics of visible cells; Outdoor renamed
OutdoorStatic. Fixes the audit's livedynamic-invisible-under-interior-roots
divergence as a side effect (live entities are never dropped by the
visibility set; culling is T3's viewcone).
DELETED (retail has no counterpart): the gl_ClipDistance shell chop
(927fd8f enable + 9ce335e outdoor scoping + UseShellClipRouting + the
per-slice shell loop + clipShells param) - retail never clips cell
geometry; aperture exactness = punch/seal + z-buffer + this order. The
old per-slice scissored AABB depth clear is replaced by retail's single
gated full clear (ClearDepthForInterior). The interior-root LiveDynamic
top-up draw and the look-in's dynamics involvement are gone (one last
pass, no double-draws).
Closes at the T5 gate (expected): #114 (chop deleted), the char-eaten-by-
doorway regression (ordering), outdoor interiors-through-doorways (punch);
#108's render half (seal) - its membership half stays re-attributed.
Suites: build green, App 226 green (partition tests rewritten to the T1
contract), Core 1398 + 4 pre-existing #99-era + 1 skip.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The user gate + bisect overturned the coincident-cell attribution: the
phantom staircase persists in the PRE-session build (bisect screenshot at
the hall wall) and is drawn by the ENTITY pipeline, untouched by any clip.
Root cause (dat-proven, DumpHallModel_PolyFlagHistogram): retail renders a
GfxObj by TRAVERSING its drawing BSP (D3DPolyRender); polygons present in
the Polygons dictionary but referenced by NO DrawingBSP node are never
drawn - they are physics/no-draw geometry. The Holtburg meeting hall
(0x010014C3) keeps its exterior stair-ramp as dictionary polys 0+1: in
the PhysicsBSP (ACE walks The Sentry on it at z 117-118; invisible-but-
walkable in retail) but orphaned from the draw tree (true at ALL degrade
levels - the LOD theory is dead, Degrades[0] IS the base model). The hill
cottage (0x01000827) carries 8 such orphans. Our extraction iterated the
dictionary -> drew the collision skeleton: the wall staircase up close,
the flying stairs over the cottage roofline from afar (orphan ramp spans
world 221-232 at z 116-124.5; visible over the cottage roof from the west).
Fix: PrepareGfxObjMeshData filters to CollectDrawingBspPolygonIds(gfxObj)
when a drawing BSP exists; models without one draw everything (unchanged).
Physics untouched (collision keeps the full physics set - retail parity).
CellStruct extraction not touched (different conventions; no orphan
evidence there yet).
Dat-backed pins: Issue113DrawingBspFilterTests (hall orphans == 0+1,
cottage orphans == 0..7). Suites: App 226 / Core 1392 + the 4
pre-existing #99-era failures / UI 420 / Net 294.
Note: the earlier shell-clip enable (927fd8f, scoped 9ce335e) remains
correct and orthogonal - it crops interior CELL geometry to apertures
outdoors; this commit removes the phantom SHELL geometry at its source.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Attribution (dat-evidenced, supersedes the misplaced-cell hypothesis):
the phantom staircase is the Holtburg MEETING HALL (AAB3 building[0],
model 0x010014C3 at AAB3-local (36,84,116)), NOT an A9B3 building - the
user stood at the A9B3/AAB3 boundary (cell-transit trail in
issue112-gate1.log) and clicked through the hall to the NPC behind it.
The hall's interior stair cells (0x100..0x106, ring climbing z 116->124.5
to the deck hatch) have geometry coincident with the shell's west wall
(both at local x=29.0). Our outdoor per-building flood admits them with
CORRECT tight clip regions (4-6 planes, door-aperture NDC boxes -
Issue113MeetingHallFloodTests proves it), but DrawEnvCellShells drew them
WHOLE: mesh_modern.vert writes gl_ClipDistance from the routed CellClip
slot, and gl_ClipDistance is ignored unless GL_CLIP_DISTANCEi is enabled -
which no caller ever did for the shell pass (born inert in 1405dd8).
Interior staircase painted across the exterior wall; unpickable because
it is cell geometry, not an entity.
Retail oracle: cell geometry IS clipped to the accumulated portal view -
Render::set_view (:343750) installs the view polygon edge planes,
DrawEnvCell submits every cell polygon with planeMask=0xffffffff (:427922)
through ACRender::polyClipFinish. Characters/meshes are NOT poly-clipped
(viewconeCheck path) - entity routing stays cleared, comment scoped.
Fix: enable GL_CLIP_DISTANCE0..7 around exactly the shell pass
(self-contained per feedback_render_self_contained_gl_state; no early-outs
between set and restore). Slot-0 fallback slices (>8-plane regions) still
draw pass-all - the assembler's scissor fallback remains unimplemented and
documented; the new flood test pins 0 such slices at the hall.
Refuted along the way (full evidence in Issue113PhantomStairsDumpTests):
- ONE misplaced interior EnvCell unifying #113+#112+collision gaps: all 17
A9B3 cottage cells share an identical dat Position (nothing to misplace);
the #112 gap is a real 20cm doorway micro-gap 0.23m outside threshold
cell 0x104 (straddles its exterior portal plane at foot radius 0.48);
missing object collision remains #99/A6.P4.
- A9B3 dat content near the spot: no stair geometry in shell (balcony at
z119 + turret roof only), cells (flat 116/118.8), statics, or stabs.
Tests: Core 1389 green (+6 dump facts) / App 224 (+1 flood replay) /
UI 420 / Net 294; pre-existing 4 #99-era failures unchanged.
Visual gate pending: user re-check of the hall west face vs retail.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
THE BUG (pinned deterministically by the new CornerFloodReplayTests harness — real
Holtburg cells, captured corner-press scenario): a smooth 2 cm/step monotonic eye
sweep across the 0172↔0173↔0171 doorway produced a NON-monotonic flood — on ~10 of
61 steps the player's room (0172) vanished from the flood entirely or collapsed to
a sub-pixel sliver, taking its downstream chain (016F, the outside view) with it.
Live, those isolated frames are the §4 background strobe: openings/passages flash
the clear color during transitions, and the corner press shows background at the
angles that park the eye near the doorway plane.
TWO root causes, both fixed:
1. ApplyReciprocalClip ran the reciprocal portal polygon through the legacy
divide-first ProjectToNdc + 2D Intersect path, justified by "the reciprocal is
never near the eye." That assumption is exactly false at doorways/corners: the
reciprocal IS the same opening whose plane the eye presses against (2-60 cm).
ProjectToNdc's MinW=0.05 eye-clip + side-plane clip + divide is knife-edge
there — 2 cm eye moves flipped its output between a no-op and a duplicated-
vertex hairline that ground the healthy region down to <3 distinct vertices.
FIX: route the reciprocal through the SAME homogeneous pipeline as the forward
clip (ProjectToClip + ClipToRegion) — which is what retail does:
PView::OtherPortalClip (decomp:433524-433563) runs the reciprocal through the
very same GetClip(finish=1) → ACRender::polyClipFinish homogeneous clipper.
Also ported retail's skip: exact_match portals (CCellPortal.exact_match,
acclient.h:32300; PView::ClipPortals :433689) bypass the reciprocal clip —
both sides share the same polygon, so re-clipping is redundant.
2. CellView.CanonicalKey missed COLLINEAR re-emissions: the homogeneous region
clipper legitimately inserts intersection vertices ON a subject edge when a
region edge grazes it, so BFS re-clip rounds re-emit the SAME geometric region
with 1-2 extra collinear edge vertices — keyed as distinct, defeating the
dedup and accumulating duplicate polygons (this was the real mechanism behind
the historical "float drift defeats the dedup" rationale that had parked the
reciprocal on the unstable path). FIX: canonicalize away collinear snapped
points (exact integer cross-products on the 1e-3 NDC grid) so the key is
purely a function of the region's corners.
Conformance: CornerSweep_FloodIsCompleteAndMonotone pins the fixed behavior —
61-step monotonic eye sweep ⇒ full flood every step, outside view always reached,
player-room region monotone (was: clean shrink 4.000→2.879 with zero drops, vs
~10 glitch steps before). Diagnostic facts (trace diff, hop microscope, primitive
scratch) retained as the apparatus.
Suites: App 223 green (incl. Build_AppliesReciprocalOtherPortalClip, now passing
with proper tightening AND dedup), Core 1377 green + the 4 pre-existing #99-era
failures + 1 skip, UI 420, Net 294. Visual gate pending: corner press, room↔room,
cellar↔floor, indoor↔outdoor transitions.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Pinned (flap-sidechk.log): the indoor doorway flap is a 0171<->0173 flood cycle. Back portals show camInterior=False (our side test already agrees with retail) but were traversed when eyeIn=True because the side-cull had an bypass (added 2026-06-05 for the void). Within 1.75m of a doorway that bypass kept the BACK portal alive -> mutual re-contribution -> re-enqueue churn (maxPop=16) -> eye-sensitive flood depth -> grey flap + dropped floor.
Fix (Option B1): drop the bypass from the side-cull in Build + BuildFromExterior so back portals cull by the side test alone, exactly like retail PView::InitCell (:432962, no eye-in-opening bypass). The forward-portal clip-empty void rescue is a SEPARATE branch and is untouched (Build_EyeStandingInInteriorPortal_FloodsNeighbour stays green). New RED->GREEN test Build_BackFacingPortal_EyeStandingInOpening_StillCulled; full App suite 218 green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replace the outdoor root's single unified reverse-portal flood (whose root-level
portal-side test oscillated as the chase eye grazed a doorway — the measured
flood 2<->6) with retail's per-building floods.
- OutdoorCellNode.Build(uint): portal-less land root; floods only itself ->
full-screen OutsideView -> terrain (PortalVisibilityBuilder IsOutdoorNode seed).
- PortalVisibilityBuilder.ConstructViewBuilding: per-building flood seeded at a
building's own finite entrance (retail ConstructView(CBldPortal) 0x5a59a0 via
DrawPortal 0x5a5ab0 / portal_draw_portals_only 0x53d870). Entrance-bounded ->
consistent ~2-cell depth (measured retail cell_draw_num, handoff OPTION-A 3.4).
- RetailPViewRenderer.DrawInside: when the root is the outdoor node, group nearby
cells by BuildingId and merge each per-building flood into the frame before
assembly; existing shells/object-list draw path unchanged. 48 m seed cutoff.
- GameWindow: pass flat NearbyBuildingCells only on outdoor-node frames.
Tests: +3 PortalVisibilityRobustnessTests (per-building touches ~2 cells, membership
stable under the measured 36 um eye jitter). UnifiedFloodTests retired (its subject,
the unified flood from the outdoor node, is removed); surviving full-screen-OutsideView
coverage moved to OutdoorCellNodeTests. App Rendering 207/207, Core movement 14/14.
Conformance-verified sound; the grazing-doorway flap is the visual acceptance test.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Apparatus + handoff for the indoor flap. Confirmed (primary evidence): the flap is the
portal-flood clip being µm-sensitive at the threshold, driven by a ~1-8µm jitter in the
player RenderPosition (physics resting position not bit-stable; Lerp surfaces it). REFUTES
the 2026-06-07 see-through/EnvCell/outdoor-node diagnosis (ModelId GfxObj 0x01000A2B IS the
solid exterior) AND an enqueue-once attempt (retail propagates late slices via AddToCell;
the existing PropagatesNewSlicesToExit test caught it; reverted). Adds: Build determinism
test, A8CellAudit gfxobj dump, [pv-input] 6dp probe + [render-sig] outRoot/bshell fields.
No functional fix shipped. Next: higher-precision physics rest trace -> port retail
kill_velocity/contact rest-stability. Canonical: docs/research/2026-06-08-flap-rootcause-physics-rest-handoff.md
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Render unification cutover, Step A (additive, behavior-neutral until Step B). When PortalVisibilityBuilder.Build roots at the synthetic outdoor node, seed OutsideView with the full-screen NDC quad so ClipFrameAssembler yields a full-screen OutsideView slice and DrawInside's DrawLandscapeThroughOutsideView draws terrain/sky/scenery/weather as the node's shell — the same callback that already draws the doorway slice for an interior root looking out.
Keyed on a new explicit LoadedCell.IsOutdoorNode flag (set by OutdoorCellNode.Build), NOT a cell-id heuristic: production EnvCell ids are >= 0x100 but test fixtures use low interior ids, so an id test misfired on 4 existing PortalVisibilityBuilderTests.
Nothing roots at the node until Step B, so this is behavior-neutral. Tests: App 216/0 (2 new UnifiedFloodTests incl. the spec section 10 pure-outdoor regression guard + 2 OutdoorCellNode flag assertions).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
TDD characterisation test proving PortalVisibilityBuilder.Build correctly roots at the
outdoor cell node (OutdoorCellNode) and floods into adjacent buildings through their
entrance portals. No changes to Build or OutdoorCellNode were needed.
Key finding: the task spec's building fixture used InsideSide=0 for an exit portal whose
building interior is at Y>=5 (Normal=(0,-1,0), D=5). The correct InsideSide is 1
(interior where dot<=0 -> Y>=5); with InsideSide=0 the outdoor camera (Y=-3, dot=8)
incorrectly passes as "interior" of the building so OutdoorCellNode.Build's InsideSide
flip (0->1) puts the outdoor camera on the wrong side of the gate.
Corrected fixture uses InsideSide=1 matching OutdoorCellNodeTests geometry convention
(building interior = POSITIVE dot side, outdoor = negative dot side; flip makes outdoor
negative-dot side the traversable direction). Both tests pass; full suite 214/214.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Purely additive: creates the synthetic outdoor cell node that will serve as the
flood-graph root for the unified render pipeline. Each nearby building's exit
portal (OtherCellId==0xFFFF) is reversed into a portal pointing back into the
building, with its polygon transformed to world space and InsideSide flipped so
the outdoor half-space is "inside" the node. WorldTransform=Identity (portals in
world space). Mirrors retail's outdoor landcell that DrawInside(viewer_cell)
roots at (SmartBox::RenderNormalMode, decomp pc:92635). Nothing consumes this
yet — consumer wiring is Task 2.
2 new tests, 212 total passing, 0 regressions.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Checkpoint of the unified retail-faithful indoor render. The two-week HANG/grey is fixed and the
interior seals (live-verified by the user). Commits the session render-rewrite foundation together
with the fixes that made it functional.
- HANG fix: PortalVisibilityBuilder.Build portal flood did not terminate (the faithful ProjectToClip
near-side clip drifts per round, defeating the CellView dedup; the BFS had no bound after U.2a removed
MaxReprocessPerCell). Fix = drift-tolerant snapped/canonical CellView.Add dedup (PortalView.cs) plus
restored MaxReprocessPerCell=16 bounded re-enqueue (PortalVisibilityBuilder.cs). Re-enqueue is kept
(load-bearing for late-slice propagation, Build_ViewGrowthAfterDoneCell_PropagatesNewSlicesToExit);
only its count is capped. CellViewDedupTests added.
- Seal (DrawCells Task 2): RetailPViewRenderer.DrawEnvCellShells draws EVERY visible cell via
IndoorDrawPlan.ShellPass (was gated on the ClipFrameAssembler slot filter, leaving slot-less cells grey).
- Look-in FPS: GameWindow exterior look-in candidates limited to the player landblock +-1 (was all ~81
loaded LBs iterated every outdoor frame). No behaviour change (far cells were >48m, already culled).
Remaining dominant issue = the FLAP at transitions: viewer-cell metastability (render roots at the
camera-eye cell, which oscillates outdoor-indoor as the 3rd-person boom drifts across the doorway,
confirmed in render-sig). SEPARATE fix, NOT the DrawCells port. Full handoff + flap fix plan + tracked
follow-ups (#78 terrain, look-in-from-inside, look-in FPS, L-spotlight):
docs/research/2026-06-07-indoor-render-session-handoff.md.
Baselines: build 0 err; App.Tests 210/210; Core.Tests 1331 pass / 4 fail (pre-existing) / 1 skip.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Pure port of retail DrawCells membership: reverse cell_draw_list, per-slice. Pins the
grey regression — a cell in OrderedVisibleCells is never dropped from the shell pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Port retail CameraManager::UpdateCamera's convergence snap (0x00456fcd):
once the per-frame lerp step is below 0.0004 m AND the rotation within
0.000199999995, freeze the damped eye at an exact fixed point instead of
Vector3.Lerp's endless sub-mm asymptote. The drift was walking the 3rd-person
eye across the vestibule/room portal plane at rest, flipping the per-frame
viewer-cell resolve 0170<->0171 -> the indoor grey/texture flicker. The
collided-eye firewall (separate publishedEye local) is already present.
Adds ApplyConvergenceSnap static (TDD: 3 unit tests + 1 integration freeze
test) + SnapEpsilon/RotCloseEpsilon. App suite 183 -> 187, all green.
Plan: docs/superpowers/plans/2026-06-05-indoor-viewer-cell-flicker-fix.md
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When the chase camera roots in a thin doorway cell and the eye stands in an interior portal opening (live capture: vestibule->room portal D=0.16m, proj=0), the 2D projection degenerates and the neighbour was culled (cells=1) -> only the thin cell drew -> bluish void / transparent ceiling. Retail's 3D clip imposes no constraint for a portal the eye is inside, so the neighbour is fully visible. When the clipped region is empty but the eye stands in the opening (EyeInsidePortalOpening: within 0.5m of the portal plane AND point-in-opening), flood the neighbour with the current view. Guarded so an off-screen degenerate portal stays culled (no #95 blowup; over-include is mesh-frustum-culled at draw). Visual-verified: cellar ceiling now solid.
Band-aid for thin-cell-root coverage; likely superseded by the boom-stability + viewer-cell dead-zone + w=0 near-plane clip fix next session (reassess / maybe revert). 2 RED->GREEN tests; cyclic/hub termination guards unchanged.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
ProjectToNdc clipped only the eye half-space (w>MinW, a 2026-06-03 workaround) and left the 4 frustum side planes to the 2D ScreenPolygonClip. When the eye is within a portal's near plane, small-w verts explode under the perspective divide (probe saw NDC (10.2,-67.4)); the 2D clip then collapses to empty -> OutsideView empty -> terrain Skip -> the bluish doorway void. Clip the eye plane + 4 side planes (homogeneous Sutherland-Hodgman) before the divide so NDC is bounded to the screen by construction, matching retail GetClip -> polyClipFinish (clip in clip-space before the divide; pc:432344).
Partial: NOT the full flicker fix. The dominant cause (camera boom drift + viewer-cell flip at boundaries + missing w=0 near-plane clip) is identified and deferred to the next session per the handoff. 2 RED->GREEN tests.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Complete Render Residual A's faithful port: PhysicsCameraCollisionProbe.SweepEye
now mirrors SmartBox::update_viewer (acclient_2013_pseudo_c.txt:92761) end-to-end:
- Start cell (pc:92824-92844): indoor (>=0x100) seats the sweep at the head-PIVOT
via PhysicsEngine.AdjustPosition (the cellar-lip case — feet in the low connector,
head up at floor level); outdoor keeps the player cell.
- Sweep pivot -> sought-eye from the seated start cell (unchanged 0x5c viewer flags).
- Success (pc:92870): set_viewer(curr_pos), viewer_cell = curr_cell.
- Fallback 1 (pc:92878): AdjustPosition(sought_eye).
- Fallback 2 / no-cell (pc:92775, 92886): snap to player, viewer_cell = null. This
also makes cellId==0 faithful (was returning the desired eye; retail snaps to
player_pos) and adds the playerPos arg to ICameraCollisionProbe.SweepEye.
Supporting: ResolveResult.Ok surfaces FindTransitionalPosition's return (retail
find_valid_position != 0, pc:273898) so SweepEye knows when to fall back.
TDD: 11 new tests (FindVisibleChildCell 4, AdjustPosition 3, ResolveResult.Ok 2,
SweepEye orchestration 2). The seating test's RED proved the sweep does NOT auto-
advance feet->room, so the pivot-seated start cell is genuinely decisive. Core
1326 pass / 4 documented-fail / 1 skip; App 179 pass / 0 fail. No regression.
Per the live-capture finding, the visible payoff is the cellar-corner (point 3);
the cottage-room bluish void stays for residual C. Spec:
docs/superpowers/specs/2026-06-05-residual-a-camera-collision-design.md.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The cottage doorway 'void' (dark cell + floating entities while the chase camera looks
through the opening): PortalProjection.ProjectToNdc clipped portals on w+z>=0 — the GL
[-1,1] near-plane test — but acdream's camera builds its projection with D3D-convention
Matrix4x4.CreatePerspectiveFieldOfView and a 1.0 m near plane (RetailChaseCamera). Against
that matrix w+z>=0 discards everything within ~0.5 m of the eye, so when the camera orbits
to ~0.1 m from a doorway portal the near edge is clipped, the far edge projects off-screen
([flap] showed p->0171 D=0.10 proj=4 clip=0 ndc Y=-3.5..-6.6), the room behind is culled
(vis=1) and only the tiny vestibule shell draws -> dark void. Rotating away moved the eye
off the portal -> vis=5 -> room rendered.
Fix: clip against the EYE (w > MinW, MinW=0.05 m), near-INDEPENDENT — a portal you're
standing in still projects (covers the screen) so the cell behind stays visible. We only
use the projected x/y for the visibility clip region, so keeping vertices in front of the
near plane is correct. Matches retail PView::GetClip near-clipping the portal before project.
RED->GREEN regression test (doorway 0.1 m from a near=1.0 eye); 177 App tests green; the
existing straddling ±50 bound still holds.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
