The Facility Hub corridor dead-stop's second half: after one seam hit,
every forward resolve returned ok=False hit=no with zero advance. The
body-persisted SlidingNormal (-1,0,0) projected the exactly-anti-parallel
corridor push to zero in AdjustOffset and the step loop aborted at step 0
before any collision test could refresh the state.
Audit (docs/research/2026-07-06-137-sliding-normal-lifecycle-audit.md):
retail's only in-transition sliding-normal writer is validate_transition
(0x0050ac21); the whole sphere/BSP layer writes NONE (grep-verified), and
the body persistence (SetPositionInternal 0x005154c2, SLIDING_TS bit sync
0x005154e1) runs only on transition success. Our BSPQuery Contact-branch
full-hit responses were stubs (SetCollisionNormal + SetSlidingNormal +
return Slid) where retail dispatches the real slide_sphere — so the seam
hit (a SUCCESSFUL full-advance resolve per the live log) persisted the
phantom wall's normal, which retail's lifecycle structurally cannot do.
- BSPQuery Contact foot full-hit fallback + head full-hit now route
through Transition.SlideSphereInternal (CSphere::slide_sphere
0x00537440 — in-frame slide, no sliding-normal write; ACE
BSPTree.cs:202,310-316). The dead stub is rewritten as the faithful
BSPTREE::slide_sphere wrapper.
- PhysicsEngine sliding writeback gated on ok (retail success-only
placement; behaviorally latent, removes the failed-frame leak class).
- Register: TS-4 amended (Path-6 steep-tangent sites still write the
normal — now documented), TS-45 added (SphereCollision's write — same
leak class, left for a follow-up out of #171's blast radius).
- Pins: Issue137SlidingNormalLifecycleTests — both site pins RED->GREEN,
plus the retail persist/absorb/clear wall lifecycle (validate-write
persistence, faithful absorbed anti-parallel frame, oblique escape
clears the bit). BSPQueryTests full-hit pin updated to the real slide.
Mechanism 1 (PortalSide portal polys solid in the physics set) stays
OPEN - #137 not closed; the corridor re-test rides that session.
Suites: Core 2545 / App 713 / UI 425 / Net 385, 0 failures.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Facility Hub double door (Setup 0x02000C9D) embeds the player into
the visual panel from one side and blocks with a phantom slab on the
other: its Setup PLACEMENT frames pose the two panels AJAR (yaw
-150/-30 deg, 0.44 m behind the doorway plane — dat-confirmed by the
Issue175 inspection) while the rendered door poses them CLOSED from
the wire-supplied motion table via the sequencer. ShadowShapeBuilder
read placement frames, so the 1.66x0.29x2.95 m physics slabs
registered at the ajar pose. Retail tests each part's LIVE
CPhysicsPart pose — for an idle door, the motion table's default
(closed) state.
Fix: ShadowShapeBuilder.FromSetup gains partPoseOverride (BSP part
shapes only); RegisterServerEntityCollision derives it from the spawn
MotionTableId via GameWindow.MotionTableDefaultPose (default style ->
first cycle -> LowFrame part frames). Null/short poses fall back
per-part to placement frames — table-less entities and landblock
statics unchanged. One-shot snapshot vs retail's per-frame live pose
is register row AP-84 (equivalent for the door lifecycle: closed ==
default pose; open == ETHEREAL bypasses collision, #150).
Pins: FromSetup_PartPoseOverride_ReplacesPlacementFrames /
_NoOverride_KeepsPlacementFrames / _ShortOverride_FallsBackPerPart.
Suites: Core 2539 / App 713 / UI 425 / Net 385 green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
An observed character jumping into a dungeon ceiling hovered at the
roof until its ballistic arc decayed, landing visibly late (user
report, 0x0007). The remote DR tick sweeps collision (position pinned
at the ceiling — no clip-through) but retail's post-transition velocity
response, CPhysicsObj::handle_all_collisions (pc:282699-282715:
v -= (1+elasticity)*dot(v,n)*n), was only ported for the LOCAL player
(L.3a). The remote body kept its +Z launch velocity and re-integrated
it into the roof every tick — the position was clamped but the
timeline was pure ballistics.
Retail runs handle_all_collisions after every SetPositionInternal for
every physics object, remotes included. Mirror the local reflection
block in the remote sweep's post-resolve path: same formula, same
AD-25 airborne-before-AND-after suppression (corridor slides and
landings don't reflect; the landing snap's Velocity.Z <= 0 gate stays
intact), same Inelastic zero-out for future missiles. AD-25 register
row extended to cover both sites.
Suites green: Core 2533 / App 713 / UI 425 / Net 385.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Holtburg town-network portal platform (stab 0xC0A9B465, Setup
0x020019E3, CylSphere r=2.597m h=0.256m) blocked the player with an
endless rim slide instead of retail's step-up-onto-top — gating the
whole #137 dungeon repro. Surfaced when #149 started registering
BSP-less stab CylSpheres: the collision SHAPE became right while the
RESPONSE was still the hand-rolled AP-6 approximation (step-up gate +
radial wall-slide only).
Root cause: no cylinder-TOP support anywhere. DoStepUp's internal
step-down probe needs retail's step_sphere_down (0x0053a9b0) to land on
the flat top — a cylinder has no polygons for the walkable search — so
every step-up onto a wide cylinder failed into StepUpSlide and the
player orbited the rim (probe-confirmed: [cyl-test] result=Slid with
horizontal rim normals, launch-137-repro.log).
Port the full family verbatim: dispatcher intersects_sphere 0x0053b440
(placement/ethereal detection, step-down cap landing, walkable probe,
grounded step_sphere_up 0x0053b310, PathClipped collide_with_point
0x0053acb0, airborne land_on_cylinder 0x0053b3d0, Collide-flag
exact-TOI cap rest) + collides_with_sphere 0x0053a880 +
normal_of_collision 0x0053ab50 + slide_sphere 0x0053b2a0. Pseudocode +
settled BN x87 ambiguities (via ACE cross-ref) + two ACE bugs found and
NOT copied (head-slide foot-disp; see doc §8):
docs/research/2026-07-05-ccylsphere-collision-family-pseudocode.md
Ethereal cylinders now flow through retail's Layer-2 override
(pc:276961) instead of the early-OK consume — same net #150 behavior,
plus retail placement-blocked-by-cylinder semantics. SlideSphere gains
a sphereNum param (retail slides the head sphere by its own
displacement, 0x0053b843).
Register: AP-6 retired; AP-83 added (PerfectClip TOI tail decoded per
ACE, dead code until missiles). Tests: CylSphereFamilyTests (grounded
step-up onto the exact platform shape, tall-cylinder block, airborne
top landing, ethereal guard); the #42 self-shadow control assertion
updated to the retail observable (denied movement — the old ~1m radial
self-push was the approximation's artifact, not retail). Suites: Core
2533 / App 713 / UI 425 / Net 385 green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Structural capstone of the R5 movement-manager arc; zero behavior change.
Retail MovementManager (acclient.h /* 3463 */, 16 bytes / four pointers)
gives every CPhysicsObj ONE owner for its motion_interpreter +
moveto_manager. acdream carried them as loose per-entity objects wired by
hand at three sites. This slice:
- New src/AcDream.Core/Physics/Motion/MovementManager.cs — owns
MotionInterpreter + lazy MoveToManager (MakeMoveToManager 0x00524000 via
a MoveToFactory closure, the acdream stand-in for the physics_obj/
weenie_obj backpointers) + the relays with retail call shapes:
PerformMovement 0x005240d0 (types 1-5 -> minterp, 6-9 ->
MakeMoveToManager + moveto, (type-1)>8 -> 0x47), UseTime 0x005242f0
(moveto only), HitGround 0x00524300 (minterp FIRST then moveto),
HandleExitWorld 0x00524350 (minterp only), CancelMoveTo 0x005241b0,
HandleUpdateTarget 0x00524790, IsMovingTo 0x00524260.
- RemoteMotion.Movement + PlayerMovementController.Movement hold the ONE
facade; Motion/MoveTo become child views so the comment-dense call sites
read unchanged. The three wiring sites (EnsureRemoteMotionBindings,
EnterPlayerModeNow, the chase harness — same commit per the mirror rule)
construct through MoveToFactory + MakeMoveToManager(), preserving the
pre-facade eager timing (side-effect-free ctor = unobservable either way).
- Relay call sites repointed: both remote landing HitGround pairs + the
player landing pair, despawn HandleExitWorld, TickRemoteMoveTo + the
player Update UseTime, RouteServerMoveTo (takes the facade; routes via
the retail PerformMovement dispatch), InstallSpeculativeTurnToTarget,
host HandleUpdateTarget/InterruptCurrentMovement closures (retail
CPhysicsObj::HandleUpdateTarget @0x00512bf0 fan head + the TS-36
interrupt chain, now the literal facade relays).
- NOT absorbed per the slice spec: unpack_movement stays App
(RouteServerMoveTo + UM heads; Core.Net types stay out of Core.Physics);
TS-42 per-tick order untouched (R6); #170/#171 gate-passed machinery
untouched. PerformMovement's set_active(1) head not re-asserted (spawn
asserts Active; status quo — no new register row).
- Register: TS-41/TS-42 source wording freshened to the facade shape;
AD-36 retire note corrected (facade half closed; residue = entities
that never get a RemoteMotion). No new rows.
- Conformance: 15 new MovementManagerTests pin the dispatch table, lazy
create, relay targets/order, null tolerance. Suite 4052 green; the
183-case/funnel/moveto/chase/sticky suites UNMODIFIED (harness
construction mirrors production, test bodies untouched).
Decomp: docs/research/2026-07-03-r5-managers/r5-movementmanager-decomp.md
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Gate 2: pack behavior good except "sometimes the monster is in the
character / too close vs retail". The ACDREAM_PROBE_STICKY capture
nailed it frame-by-frame: 1661 deep-overlap AdjustOffset ticks, ALL
steering inward (dist -0.65 -> -0.78 -> ... -> -1.9 at +0.13/tick),
monsters converging to centerDist~0 — while the suppressed-snap lines
show ACE's authoritative positions stayed properly OUTSIDE (drift up to
7.7 m). The radii were correct (tgtR=0.68, ownR=0.59-0.98).
Root cause: ACE's literal decode of StickyManager::adjust_offset
(`if (delta >= |dist|) delta = dist;`) leaves delta POSITIVE when the
overlap exceeds one tick's step — steering TOWARD the target center, a
runaway whose equilibrium is centers-coincident. ACE servers virtually
never reach that branch (quantum >=1/30 -> threshold ~1 m); at
render-rate quanta the threshold is ~0.13 m and pack jostle trips it
constantly. The BN mush (0x00555554-0x00555597) is unreadable on
exactly this compare; the retail oracle (side-by-side on the same ACE:
monsters separate) refutes the ACE-literal reading.
Pin: sign-correct clamp — `else if (dist < 0) delta = -delta` (back off
rate-limited). Identical to ACE-literal in every shallow/outside case.
Register row AP-82 (same commit) with the cdb verification note.
Conformance: StickyManagerTests.AdjustOffset_DeepOverlap_BacksOff_
RateLimited. Full suite 4039 green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Gate 1 (2026-07-04): "better in general" + three residuals — monsters
pushed INTO the player, attacks with stale facing, position
"flashing/flapping instead of gliding". All three are ONE mechanism:
the legacy NPC UpdatePosition handler hard-snaps position, orientation,
and velocity/cycle UNCONDITIONALLY, fighting the armed sticky every UP
(ACE's authoritative rest pose sits ~0.6 m out and its server-side
facing lags the strafing target; the client stick holds 0.3 m + live
facing — oscillation at UP cadence).
Retail is immune by architecture, not by tuning: UP corrections flow
through the InterpolationManager into the SAME per-tick
PositionManager::adjust_offset chain where StickyManager::adjust_offset
OVERWRITES them while armed (0x00555190 chain order; 0x00555430 assigns
m_fOrigin). A server correction can never fight an armed stick
frame-by-frame. The remote-player branch already has exactly that
(queue -> combiner -> sticky overwrite); the legacy NPC path snaps
outside the chain.
Fix: suppress the NPC UP position/orientation/velocity-adoption snaps
while the entity is stuck (PositionManager.GetStickyObjectId() != 0) —
the retail chain semantics translated to the snap architecture.
LastServerPos/Time + cell bookkeeping still record; server truth
reasserts on the first UP after unstick, bounded by the 1 s sticky
lease. Register row TS-44 (same commit); retires with the S6/R6
interp-queue unification of the NPC path.
Apparatus: ACDREAM_PROBE_STICKY=1 — per-guid [sticky] lifecycle lines
(STICK / UNSTICK / LEASE-EXPIRE / TARGET-status teardown), per-armed-
tick steer lines (signed gap dist, applied delta, heading delta, live
resolve), and [sticky-snap-skip] at the suppressed-snap site.
PhysicsDiagnostics.ProbeStickyEnabled owns the flag (rule #5).
Full suite 4038 green. Awaiting gate 2 (pack melee vs retail).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Group-melee interpenetration + facing drift: the R5-V1-ported
StickyManager/PositionManager were Core-only — the StickTo/Unstick seams
were unbound and every arrival radius was 0, so ACE's Sticky|UseSpheres
melee chases closed ~one body-radius too deep and froze at stale arrival
poses until the next wire re-arm. Retires TS-39.
Wiring (anchors re-verified against the named decomp this session):
- EntityPhysicsHost owns a PositionManager; HandleUpdateTarget fans
MoveToManager then PositionManager (CPhysicsObj::HandleUpdateTarget
0x00512bc0 order).
- Seams bound remote + player: MoveToManager.StickTo (BeginNextNode
sticky arrival @0x00529d3a), Unstick (PerformMovement head), and
MotionInterpreter.UnstickFromObject (UM funnel head, 0x0050eaea).
- AdjustOffset at the retail UpdatePositionInternal slot (@0x00512d0e):
NPC branch composes pre-sweep (steer is swept by ResolveWithTransition);
remote-player branch chains the combiner offset through the shared
delta frame (the interp stage) so sticky OVERWRITES when armed
(0x00555430 assigns m_fOrigin, not accumulates); player inside the
30 Hz physics quantum before UpdatePhysicsInternal.
- UseTime (the 1 s lease watchdog) at the UpdateObjectInternal tail
(@0x005159b3): unconditional per remote; player gated on the physics
tick (retail's MinQuantum gate skips UseTime too).
- Real setup cylsphere radii (CPartArray::GetRadius/GetHeight
0x005180a0/0x005180b0 = setup radius/height x ObjScale from the spawn
record): own via EnsureRemoteMotionBindings + player wiring; target via
RouteServerMoveTo AND the speculative use-walk install (retail resolves
the target PartArray at EVERY MoveToObject site — ACE PhysicsObj.cs:951).
- Teardown parity: exit_world (0x00514e60) UnStick + ClearTarget before
the ExitWorld notify; player teleport fires teleport_hook's tail
(UnStick in SetPosition + EntityPhysicsHost.NotifyTeleported =
ClearTarget + NotifyVoyeurOfEvent(Teleported) @0x00514f1b) so mobs
stuck to the player drop their sticks on a recall.
- SERVERVEL arbitration also yields to a stuck entity (same starvation
class as the #170 fix — sticky owns the between-snap translation).
- StickyManager.UseTime aligned to retail's strict > deadline
(0x00555626; ACE >): two V1 tests had pinned the >= edge — corrected.
Register: TS-39 deleted; TS-41 narrowed (stickyArmed gate); TS-43 added
(remote teleport_hook gap — self-corrects within the 1 s lease); AP-23
narrowed (real radii at the speculative site; only the use-radius
buckets remain invented).
Conformance: 2 new full-stack sticky scenarios in
RemoteChaseEndToEndHarnessTests (arrive -> stick -> strafing-target
gap+facing track -> lease expiry; unstick-on-rearm -> re-stick).
Full suite 4038 green.
Pre-commit adversarial diff review (3 lenses + per-finding refuters)
confirmed and fixed 4 findings: ObjScale-dead radius read, player
UseTime order inversion, missing teleport voyeur notify, speculative-
site radius asymmetry.
Awaiting the user visual gate: pack melee side-by-side vs retail
(attackers reshuffle + keep facing; some overlap is ACE-server-side).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The "sustain the run" residual. The handoff's "Ready stop-node backlog
drains a beat slower than retail" framing was DISPROVEN: a new full-stack
offline harness (RemoteChaseEndToEndHarnessTests — real MoveToManager +
MotionInterpreter + AnimationSequencer + MotionTableDispatchSink + the
manual omega integration, wired field-for-field like
EnsureRemoteMotionBindings and ticked in TickAnimations' exact phase
order) proves the Core turn/run/drain pipeline healthy: the chase turn
completes in <1 s both directions, BeginMoveForward installs per arm, the
run sustains across re-arms and attack swings, and pending_motions fully
empties (retail cdb invariant add_to_queue == MotionDone).
The real mechanism (launch-drainq.log, corrected per-guid attribution —
the previous session's timeline mis-attributed [mvto] lines that fire in
the network phase): funnel per chasing scamp was 16 mt-6 arms -> 11
dispatched turns -> ONE BeginMoveForward. Any NPC receiving
UpdatePositions gets HasServerVelocity=true (synthesized from position
deltas even when the wire carries no velocity), and the grounded per-tick
branch routed those to the SERVERVEL leg, which SKIPS
MoveToManager.UseTime — [npc-tick] literally logged
"branch=SERVERVEL (skips UseTime) mtState=MoveToObject". The armed
moveto was starved for exactly the duration of the server-side chase:
legs stayed in Ready while the body glided on synthesized velocity (the
#170 slide); the manager only woke in UP-silent gaps (creature stopped
server-side) and its stale-heading turn was interrupted by the next UM
before reaching BeginMoveForward.
Retail runs MovementManager::UseTime UNCONDITIONALLY every tick
(CPhysicsObj::UpdateObjectInternal 0x005156b0, call @0x00515998) and has
no wire-velocity leg-driver anywhere; between UPs a moveto-driven body
translates from the motion state (get_state_velocity) with UP hard-snaps
correcting drift. Fix: an armed moveto (MovementTypeState != Invalid)
always takes the MOVETO leg; SERVERVEL remains only as the legacy
fallback for entities without a moveto (scripted paths / missiles).
Register: TS-41 (the narrowed SERVERVEL stopgap), TS-42 (drain-order
divergence also pinned this session: acdream drains AnimDone->MotionDone
AFTER HandleTargetting/MoveTo.UseTime; retail's process_hooks
@0x00512d3d runs BEFORE TargetManager/MovementManager in
UpdateObjectInternal — one frame of extra latency, R6 scope).
New conformance: RemoteChaseEndToEndHarnessTests (3 scenarios + theory)
+ RemoteChaseDrainBisectTests (the drain-chain pin; its first run also
demonstrated the TS-40 InWorld=false link-strip wedge shape — harness
bodies must replicate the live RemoteMotion construction).
ISSUES #170 updated (awaiting user visual gate; probes stay until then);
handoff doc superseded-note added.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Replace the AP-79 P4 TargetTracker poll adapter with the ported retail
TargetManager voyeur subscription system, wired per entity. Behaviorally a
faithful no-op refactor for the common cases (server-directed creature chase
+ auto-walk-to-object), now driven by the retail mechanism instead of the
GameWindow poll.
New: EntityPhysicsHost (App) — the per-entity IPhysicsObjHost (retail
CPhysicsObj stand-in), owning a TargetManager. Delegate-injected accessors so
it stays free of GameWindow internals (code-structure rule #1).
Wiring (GameWindow):
- _physicsHosts registry (guid → host) = retail CObjectMaint::GetObjectA,
backing the voyeur round-trip's cross-entity delivery.
- ResolvePhysicsHost lazily creates a minimal position-only host for ANY known
entity — retail lets every CPhysicsObj host a target_manager, so a STATIC
object (chest/corpse) still answers add_voyeur; without this, auto-walk to a
never-animated object would arm the moveto but never receive the immediate
target snapshot and never start.
- MoveToManager set_target/clear_target/quantum seams repointed at the host's
TargetManager (remote + player).
- HandleTargetting ticked unconditionally per entity BEFORE UseTime (retail
UpdateObjectInternal order): per-remote loop for remotes, pre-Update block for
the player. The player's tick is load-bearing for creature-chase — the player
as a watched target pushes its position to the chasing NPCs' HandleUpdateTarget
each frame, ahead of their UseTime.
- Despawn (RemoveLiveEntityByServerGuid): NotifyVoyeurOfEvent(ExitWorld) to the
entity's watchers before pruning the host — the only cleanup for a watcher
whose target already sent an Ok (past Undefined, the 10s staleness never fires).
Deleted: RemoteMotion.TrackedTarget* fields + _playerMoveToTarget* GameWindow
fields + the two manual poll blocks. AP-79 register row retired same commit
(AP section 73→72).
Delivery is now synchronous-on-set_target (retail: set_target is last in
MoveToObject, so the immediate snapshot lands with all moveto state in place)
vs AP-79's next-frame poll — more faithful. Full suite 4006 green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Retail's apply_interpreted_movement (0x00528600) does NOT dispatch with
ctor-default MovementParameters: the BN decomp smears the bitfield store
into the mush expression at raw 305778 - (word & 0x37ff) | cancelMoveTo<<15
| disableJump<<17 - which CLEARS SetHoldKey/ModifyInterpretedState/
CancelMoveTo. ACE MotionInterp.cs:444-449 confirms independently. Three
legs fixed, all retail decode, no adaptations added:
1. ApplyInterpretedMovement now builds the pass params retail actually
uses (ModifyInterpretedState=false is load-bearing): no dispatch in the
pass writes InterpretedState, so the airborne Falling substitution
PRESERVES the wire's forward command and HitGround's re-apply
dispatches it - the motion table plays the Falling->X landing link.
The W6 entry-cache (built on the wrong "retail self-heals via hoisted
registers" theory) is deleted; live reads are retail semantics. Raw
arg3 decoded as DisableJumpDuringLink -> every (N,0) caller means
allowJump=true; all 9 caller polarities fixed. copy_movement_from's
current_style copy (raw 0051e757) added to the UM flat-copy.
2. Both GameWindow landing blocks cleared the Gravity state bit BEFORE
Motion.HitGround(), whose verbatim state&0x400 gate then no-opped the
whole retail re-apply; the UP-driven landing block never called
HitGround at all. Both now run HitGround (minterp then moveto,
MovementManager::HitGround 0x00524300 order) with Gravity still set,
then do the DR bookkeeping clear (register row AP-81 added for the
remaining flag dance, retire in R6).
3. K-fix17's forced SetCycle (both copies) deleted: it executed every
landing but read the leg-1-clobbered ForwardCommand (0x40000015) and
re-set the very Falling cycle it meant to clear.
Tests: new HitGround_AfterFall_RedispatchesPreservedForward_ExitsFalling
lifecycle pin; AirborneBody state assertion flipped (it had pinned the
bug value). Suite 3,964 green incl. the 183-case retail-observer trace.
Filed #164 (action-replay Autonomous bit, no current consumer).
Awaiting live verify: stand-still landing must exit the falling pose with
zero wire input.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Root cause (pinned by the worktree investigation + verified against
source): CMotionInterp's dispatch tails strip link animations for
DETACHED objects only (retail `if (physics_obj->cell == 0)
RemoveLinkAnimations`, raw @305627, three ported sites:
DoInterpretedMotion / StopInterpretedMotion / StopCompletely). The R3
port proxied retail's cell pointer with CellPosition.ObjCellId == 0 -
but that #145 field is seeded ONLY by SnapToCell, whose single
production caller is the LOCAL PLAYER's SetPosition. Every REMOTE body
therefore read "detached" forever, and every dispatch stripped the
transition link the motion table had just appended: a used door's
swing link died the same tick (pose snapped closed<->open - the live
symptom), and remote walk<->run link poses have been silently eaten
since the guard landed (masked: locomotion cycles resemble each other;
a door's two poses don't). The dispatcher itself (GetObjectSequence
link path) was verified retail-verbatim end-to-end - not the bug.
Fix: PhysicsBody.InWorld - an explicit "placed in the world" flag
carrying exactly the guard's retail meaning (register row TS-40,
replacing the previously UNREGISTERED ObjCellId proxy). Set by
SnapToCell (retail: enter_world/set_cell assigns the cell) and by
RemoteMotion construction (a RemoteMotion exists only for a world
entity). All three guard sites now test !InWorld. Default false =
retail's pre-enter_world detached state, preserving the guard for
genuinely unplaced bodies (bare-harness interps unchanged).
Tests: InWorldLinkGuardTests pins the polarity at all guard classes
(in-world dispatch keeps links; detached strips; StopCompletely same).
Full suite green: 3,961.
If the door still snaps after this, the open question is DATA (does
the door's table author an On<->Off link at all) - next step per the
investigation: dump the real table's Links/StyleDefaults via a
DoorSetupGfxObjInspectionTests extension.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Register:
- Verified retired: AD-8/AD-9/AP-8/AP-9 (V4), TS-36/AD-26 (V5) - all gone.
- AD-34 widened: MoveToManager.pending_actions joins the managed-LinkedList
row, with the MoveToNode rename note (retail MoveToManager::MovementNode,
renamed to avoid colliding with R2's MotionNode) - V2 owed this note.
- NEW TS-39: MoveToManager.StickTo/Unstick are unbound no-op seams - a
sticky MoveTo (wire bit 0x80) completes-and-stops instead of sticking;
PositionManager/StickyManager bodies are R5 scope (call shapes only in
the R4 extraction). Retires with R5.
- Re-anchored after the V5 controller deletion shifted lines: AD-25
(:1212->:874), AP-24 (:170->:176), AP-30 (:1503->:1110), TS-21
(:362->:311, stale-comment clause updated - V5 fixed the comment).
- AP-79 (widened in V5's commit) and the PlanFromVelocity row (V4)
verified present.
Roadmap: Phase R entry - R4 SHIPPED 2026-07-03 (V0-V6 trail), R2+R3+R4
share the ONE pending user visual pass; next code stage R5 (MovementManager
facade + Sticky/Constraint/TargetManager).
Plan of record: R4 stage entry filled in with the full V0-V6 commit trail
+ expected-diffs for the visual pass (retail cylinder-distance stop, real
turn cycles during corrections, CanCharge walk/run legs).
Handoff doc: postscript - R4 complete, V4 smoke log analyzed clean and
deleted; memory index updated (animation deep-dive map: MoveToManager gap
CLOSED, the "three approximations" pattern retired).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The local player now runs server MoveTos through the same verbatim
MoveToManager remotes got in V4. One commit, GameWindow + controller,
per the no-fan-out rule for coupled slices.
P1 gate (V0-pins.md P1, ported verbatim): CPhysics::SetObjectMovement
(0x00509690 @0050972e) drops any movement event whose wire autonomous
byte is set when the addressed object IsThePlayer - ACE's self-addressed
MoveToState reflection (MovementData.cs:162 IsAutonomous=1) never
reaches unpack_movement, which is what makes the retail unconditional
unpack-head interrupt safe. Gate placed AFTER the sequence gates
(retail order). The stale "ACE follows every mt=0x06 with an mt=0x00"
comment block dies with the code it excused (its causal story was
pre-#75; refuted in V0-pins P1).
Run-rate re-anchor (P1 contingency NOT needed - no AD row): the echo
tap ApplyServerRunRate is deleted outright. Both retail feeds already
exist: PlayerDescription skills via SetCharacterSkills (K-fix7) into
InqRunRate (preferred by apply_run_to_command/get_state_velocity), and
the mt-6/7 my_run_rate wire write (M13) now performed for the player by
the shared RouteServerMoveTo. The tap's InterpretedState.ForwardSpeed
overwrite was a pre-R3 mechanism that fought the ported machinery.
B.6 auto-walk deleted wholesale (~330 lines): fields, Begin/End/
DriveServerAutoWalk, IsServerAutoWalking, AutoWalkArrived, the
autoWalkConsumedMotion gates, the #69 turn-dir edge synthesizer, and
the relocated AutoWalkArrivalEpsilon/AutoWalkTurnRateFor constants
(AD-26 retired - the invented 5/30-degree bands are gone; arrival is
retail's distance predicate; turn-first is the TurnToHeading node).
TS-36 retired: Motion.InterruptCurrentMovement binds to
MoveTo.CancelMoveTo(ActionCancelled). Movement-key edges (ctor-default
params carry the 0x8000 CancelMoveTo bit), Shift (set_hold_run
interrupt:true), jump(), StopCompletely, and teleport all cancel a
running moveto through the retail chain - verified by controller-level
tests, not assumed.
MoveToComplete seam WIDENED to natural completion (Core): retail's
BeginNextNode empty-queue completion is inline CleanUp+StopCompletely
(raw @00529d47) and notifies nothing - the client-addition seam had to
fire there (both sticky and non-sticky exits) or AD-27's deferred
close-range Use/PickUp re-send never fires. Never fires on CancelMoveTo.
AD-27 re-anchored from the deleted AutoWalkArrived event.
InstallSpeculativeTurnToTarget rewired through the player's manager
(retail 9a/9b client-initiated shape): close-range -> TurnToObject,
far -> MoveToObject; AP-23 radius buckets + the #77 CanCharge
prediction survive as the params source (row re-anchored).
Per-tick: MoveTo.UseTime() at the old DriveServerAutoWalk slot
(provisional until R6, per the plan's placement decision); the P4
player-side TargetTracker twin (fields + pre-Update feed) mirrors the
remote adapter (AP-79 row widened). HitGround dual-call added on the
player landing edge AND the remote landing site - the latter closes a
V4 wiring-contract gap the adversarial review caught (retail 2d order:
minterp then moveto; without it a landing NPC's moveto never re-arms).
Also from the adversarial review: the mt-8 unresolvable-target degrade
now performs retail's params.desired_heading = wire_heading
substitution (decomp 2f case 8; invisible against ACE per P6, required
for the verbatim degrade); the V4 remote MoveToManager binding gets a
real curTime clock (the ctor stub advanced 1/30s per READ, skewing the
progress/fail-distance windows - note: the pending V4 NPC smoke ran on
the skewed clock); TS-33 row extended with the orientation-diff gap
(ApproxPositionEqual vs retail Frame::is_equal full-frame compare - a
stationary heading snap does not reach the wire; masked against ACE,
R7 outbound scope owns the fix).
MoveToMath gains HeadingFromYaw/YawFromHeading (the P5 scalar bridge
for yaw-authoritative bodies - the player's heading snap must write
Yaw, not the quaternion the controller re-derives every frame).
Tests: 3,956 green (+8). New: MoveToManagerCompletionSeamTests (arrival
fires once with None, no refire, cancel never fires, sticky handoff
order) + PlayerMoveToCutoverTests (EnterPlayerModeNow-shape rig: walks
to arrival with zero user input and zero MotionStateChanged frames -
the #75 invariant by construction; TurnToHeading rotates Yaw and snaps
exact; W-edge and jump cancel without firing complete). W6 edge suite
retargeted from the deleted echo tap to a direct apply pass (the
regression lives in ApplyInterpretedMovement, not the wire trigger).
Spec: docs/research/2026-07-03-r4-moveto/r4-port-plan.md section 3 V5.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Every remote's server-directed movement now runs the verbatim retail
MoveToManager. EnsureRemoteMotionBindings constructs it per remote with
the full V2 seam set (position/heading/velocity providers, the P4
TargetTracker adapter via setTarget/clearTarget storing the tracked
guid on RemoteMotion) and binds InterruptCurrentMovement ->
CancelMoveTo(0x36) - the retail interrupt chain (TS-36 remote side).
UM routing is retail's unpack_movement dispatch (0x00524440): the
head-interrupt + unstick fire for EVERY movement type, then mt 6/7
build MovementParameters.FromWire(raw bitfield - now surfaced by the
parser) + a MovementStruct (mt 6 resolves the target guid against the
entity table, degrading to MoveToPosition at the wire origin per the
plan's 2f; my_run_rate written from MoveToRunRate per @300603) ->
MoveTo.PerformMovement; mt 8/9 likewise via FromWireTurnTo; ONLY mt 0
flows through the interpreted funnel (the PlanMoveToStart seed is
DELETED - retail never routes MoveTo types through the interpreted
state copy).
Per tick: the P4 tracker feeds HandleUpdateTarget(Ok/ExitWorld) from
the live entity table, then UseTime runs the manager's steering/
arrival/fail handlers, then apply_current_movement recomputes velocity
- the same shape ordinary locomotion uses. The legacy driver branches,
the stale-destination timer, and the ClampApproachVelocity band-aid
are gone; arrival now uses retail cylinder distance (watch melee-range
stop distance in the visual pass).
DELETED: RemoteMoveToDriver.cs + its tests (OriginToWorld relocated
verbatim to MoveToMath; the B.6 auto-walk's two surviving constants
inlined into PlayerMovementController, dying with it in V5);
ServerControlledLocomotion.PlanMoveToStart + tests (PlanFromVelocity
survives - new AP-80 row); the RemoteMotion MoveTo capture fields.
Registers: AD-8/AD-9/AP-8/AP-9 retired; AP-79 (TargetTracker adapter,
retire R5) + AP-80 added.
Full suite green: 3,948 passed. Live smoke launched - NPC
chase/wander behavior pending user verification (recorded in the
session handoff).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
AP-78 retired (its condition — App seam bindings + K-fix18 deletion —
landed in W4); TS-21/TS-23/AP-30 anchors re-pinned to the post-W6
controller lines; roadmap + plan record the full W0-W7 trail; the
memory index notes the 2026-06-04 sequencer-deep-dive divergence map
CLOSED by Phase R1-R3. R2+R3 share ONE pending user visual pass; R4
(MoveToManager) is next.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Core (dedicated agent, independently reviewed): HitGround 0x00528ac0 /
LeaveGround 0x00528b00 verbatim (creature+gravity gates, the
RemoveLinkAnimations seam — K-fix18's retail mechanism — velocity via
GetLeaveGroundVelocity with the autonomous flag, jump-state resets,
apply_current_movement re-sync); enter_default_state 0x00528c80 per A8
(fresh states, InitializeMotionTables seam, sentinel APPENDED without
draining pending_motions — pinned, Initted=1, LeaveGround tail);
Initted gates; the A3 IsThePlayer dual dispatch in
apply_current_movement / ReportExhaustion / SetWeenieObject /
SetPhysicsObject (a remote player routes INTERPRETED — the
ACE-divergence pin); set_hold_run 0x00528b70 + SetHoldKey 0x00528bb0
(XOR guard, None-only-from-Run); adjust_motion creature guard wired
(TS-34 retired); PhysicsBody.LastMoveWasAutonomous +
set_local_velocity(autonomous). Port discovery: retail's
apply_raw_movement 0x005287e0 / apply_interpreted_movement 0x00528600
ARE the already-shipped D6.2a/funnel functions — the dual dispatch
composes them instead of duplicating.
App cutover (orchestrator): the skipTransitionLink flag + both K-fix18
call sites DELETED (AP-74 retired). MotionInterpreter.DefaultSink routes
apply_current_movement's interpreted branch through the REAL funnel
dispatch when a sink is bound — so a remote's LeaveGround engages
Falling via the contact-gated funnel, replacing the forced SetCycle
(J19); the per-remote MotionTableDispatchSink is now PERSISTENT
(EnsureRemoteMotionBindings: DefaultSink + RemoveLinkAnimations +
InitializeMotionTables seams, idempotent from both the UM and
VectorUpdate paths; wire velocity re-applied after LeaveGround so it
stays authoritative). Player: seams bound to the player sequencer; the
controller's grounded→airborne EDGE now fires LeaveGround (jump()
clears OnWalkable and the same frame's transition detection fires it —
retail's order; walk-off-a-ledge gets the momentum fallback + link
strip it never had); the manual jump-block LeaveGround deleted;
LastMoveWasAutonomous set at the controller chokepoint (W6 refines).
Trace S8 re-expressed as the retail mechanism (Falling dispatch +
RemoveAllLinkAnimations = same final state the flag produced). 43 new
lifecycle tests. Registers: TS-34 + AP-74 retired; TS-38, AP-77, AP-78
added. Full suite: 3,665 passed. Live smoke: in-world clean.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
JumpChargeIsAllowed 0x00527a50 (CanJump→0x49 before posture; Fallen +
Crouch..Sleeping→0x48), ChargeJump 0x005281c0 — now the ONLY place
standing_longjump arms (grounded Contact+OnWalkable + forward Ready +
no sidestep/turn, raw @305453-305466); the S2a-flagged side effect
inside contact_allows_move is DELETED (J6) with regression pins that
contact checks never touch the flag (the funnel's StandingLongJump
branch is local-player scope; the controller wires ChargeJump in W4/W6
— remotes never charge client-side, no interim regression).
jump_is_allowed 0x005282b0 full chain replaces the 15-line
approximation: IsFullyConstrained→0x47 (new PhysicsBody stub, TS-35)
BEFORE the pending-head peek (A2 ordering, pinned); head peek fires
whenever the queue is non-empty (no ACE Count>1 gate; nonzero
jump_error_code short-circuits the whole chain — test proves
JumpStaminaCost is never consulted); retail entry shape verbatim
(non-creature-weenie and gravity-off skip the ground gate; null
physics obj → 0x24 NOT 8 per A10); charge → MotionAllowsJump(fwd)
double-check → JumpStaminaCost gate (new IWeenieObject member,
always-affordable PlayerWeenie stub — TS-5 extended).
GetJumpVZ/GetLeaveGroundVelocity: epsilon corrected to retail's
0.000199999995f (was 0.001 — regression-pinned at extent 0.0005);
A5 shape (clamp 1.0, weenie-null 10.0f); A6 momentum fallback fires
only when ALL THREE components are sub-epsilon and overwrites all
three with global→local(m_velocityVector).
Jump 0x00528780: InterruptCurrentMovement no-op seam (TS-36, →R4
cancel_moveto), fires unconditionally; standing_longjump cleared ONLY
on failure (success keeps it — pinned). IWeenieObject.IsThePlayer()
(PlayerWeenie true) lands for W4's A3 dispatch.
51 new tests + 1 re-pin; superseded pre-W3 jump tests removed. Full
suite: 3,623 passed. Registers: TS-5 extended, TS-35/36/37 added.
Implemented by a dedicated agent against the W0-pinned spec; arming
gates + entry shape verified against the quoted raw text.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
MotionInterpreter implements IMotionDoneSink: pending_motions
(LinkedList<MotionNode>, AD-34 wording) + add_to_queue 0x00527b80 +
motions_pending 0x00527fe0 + MotionDone 0x00527ec0 verbatim (action-class
head → UnstickFromObject no-op seam (→R5 StickyManager) + BOTH states'
action-FIFO pops; head popped UNCONDITIONALLY — A7: never match-by-id,
params unread in this build) + HandleExitWorld 0x00527f30 (the raw
decompile's null-physics-obj branch would infinite-loop if translated
literally — adjudicated as retail dead code, documented on the method) +
is_standing_still 0x00527fa0 + MotionAllowsJump 0x005279e0 with the
A1-pinned literal blocklist (28-case boundary table test: Fallen blocks,
Falling passes — ACE's transposition NOT copied).
Queue producers wired into the funnel per the decomp anchors
(re-verified from the raw text): DispatchInterpretedMotion's success
path computes jump_error_code via retail's double-check shape
(motion_allows_jump(motion), then forward_command when non-action;
the DisableJumpDuringLink params leg is TODO(W5) — no MovementParameters
threaded yet) + add_to_queue; apply_interpreted_movement's turn-stop
re-queues the Ready node (@305766-305785 — the plan's producer #2 and #3
are the SAME site; StopInterpretedMotion's internal add_to_queue @305657
is W5 scope). ContextId=0 with TODO(W5): retail's own compiled code
reads an UNINITIALIZED local for it at this call site.
GameWindow: MotionDoneTarget now binds the entity's REAL consumer —
player via PlayerMovementController.Motion (new internal property),
remotes via RemoteMotion.Motion — resolved AT FIRE TIME (a remote's
RemoteMotion can be created after its first anim tick; an eager capture
would drop completions forever). Despawn runs BOTH layers' exit-world
drains (manager then interp) per §4. AD-36 narrowed (consumed for
creature-class; doors/statics recorder-only until R5).
51 new conformance cases incl. the end-to-end chain test:
MotionTableManager.AnimationDone → sink → interp pending head pops in
step. 183-case observer-trace + funnel suites green unchanged (queue
side effects additive). Full suite: 3,582 passed.
Implemented by a dedicated agent (MotionInterpreter side) against the
W0-pinned spec; producer placements + MotionAllowsJump branch algebra
independently reviewed against the raw decomp; GameWindow wiring by the
orchestrator.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
InterpretedMotionState + the unified RawMotionState (LegacyRawMotionState
folded away) gain retail's action FIFO + ApplyMotion/RemoveMotion, ported
verbatim from the raw named decomp (0x0051e790/0x0051eb60 region, pc
293252-293703) including two genuine retail quirks pinned by tests and
independently re-verified against the raw text before commit:
- RawMotionState::ApplyMotion's RunForward (0x44000007) dead branch — a
cycle-class apply of literal RunForward writes NOTHING (retail encodes
run as WalkForward + HoldKey_Run on the raw state; same family as the
D6 apply_run_to_command early-return).
- InterpretedMotionState::RemoveMotion's exact-match-only TurnRight/
SideStepRight handling (left variants fall through to the style/
forward branches).
MovementParameters verbatim (A4 pin): 18 named flags per the absolute
mask table, ctor = 0x1EE0F expansion + distance_to_object 0.6 /
fail_distance FLT_MAX / speed 1 / walk_run_threshhold 15 / hold_key
Invalid — with the two ACE-divergence traps ported RETAIL-side
(can_charge FALSE where ACE defaults true; threshold 15.0 not 1.0).
MotionNode {ContextId, Motion, JumpErrorCode} (acclient.h:53293) — the
pending_motions node W2 consumes.
WeenieError renumbered to retail's numeric semantics (A10 table):
NotGrounded=0x24, GeneralMovementFailure 0x24→0x47, new 0x3f/0x40/0x41
combat-stance rejects + 0x42 chat-emote + 0x45 action-depth; the
airborne jump/action returns corrected 0x48→0x24 per the A10 sweep
(incl. jump_is_allowed's null-physics-obj 0x24-not-8 divergence from
ACE). Codes are local-only — wire untouched.
Outbound packer proof: RawMotionStatePacker unmodified; all 6
golden-byte RawMotionStatePackTests pass unmodified. TS-24 register row
updated (capability landed; outbound wiring still open).
Implemented by a dedicated agent against the W0-pinned spec; quirks,
scope, and suite independently verified. Full suite green: 3,531
(374+425+713+2015+4 pre-existing skips).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The funnel's retail-ordered dispatches now go directly into the entity's
motion-table stack via Motion/MotionTableDispatchSink (Core):
ApplyMotion → PerformMovement(InterpretedCommand), StopMotion →
PerformMovement(StopInterpretedCommand). No axis collection, no
single-cycle priority pick, no Commit pass, no HasCycle probe, no
Run→Walk→Ready fallback chain — GetObjectSequence 0x00522860 +
is_allowed decide (closes H4, H5-callers, H11-callers, H15, H17-carry).
Run-while-turning now blends for real: the turn is a Branch-4 modifier
combined over the untouched run substate (AP-73 DELETED from the
register).
AnimationSequencer gains the public PerformMovement passthrough (lazy
initialize_state + locomotion velocity synthesis on success — AP-75;
remote body translation via PositionManager.ComputeOffset depends on
CurrentVelocity) and InitializeState(); HasCycle DELETED (the miss
hazard is structurally gone — GetObjectSequence checks the cycle before
any surgery; new conformance test pins sequence+state untouched on a
miss).
GameWindow: sink swap with the TurnApplied/TurnStopped ObservedOmega
callbacks (H17 carried verbatim — register AP-76, retire R6); spawn +
door sites run retail's enter-world order (initialize_state installs
the table default, the wire's initial motion dispatches unguarded — the
L.1c fallback chains deleted); despawn drains the pending queue via
HandleExitWorld (MotionDone success:false per entry, 0x0051bda0).
5 new MotionTableDispatchSink conformance tests (lazy init, Branch-4
turn blend + callback, Case-B stop unwind, Case-A stop re-drive,
miss no-op). Full suite green: 3,462 passed.
Live smoke vs ACE: in-world, NPC emote/Ready UMs dispatching through
the new path, [MOTIONDONE] completions firing across entities — first
live proof of the Q3→Q4→Q5 chain. Zero exceptions.
Registers: AP-73 deleted; AP-76 added.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
AnimationSequencer becomes a thin shim over the verbatim R2 stack:
SetCycle dispatches the style change (Branch 1) then the motion (Branch
2/3/4) through MotionTableManager.PerformMovement; PlayAction is the
same dispatch (actions rebuild via Branch 3; modifiers are Branch 4
physics-only combine_motion — the AP-73 turn-blend mechanism now runs
for real). CurrentStyle/CurrentMotion/CurrentSpeedMod are read-only
mirrors of MotionState (post-adjust_motion, signed mod). Lazy
initialize_state on first drive (retail lazy-create analog) keeps
undriven sequencers do-nothing.
DELETED legacy inventions (net -648 lines): the adapter fast-path
(replaced by Branch-2 fast re-speed: change_cycle_speed +
subtract/combine_motion), Fix B + IsLocomotionCycleLowByte (replaced by
remove_redundant_links on the pending queue — the retail mechanism the
2026-05-03 cdb trace pointed at), the stop-anim low-byte fallback
(replaced by get_link's reversed-key double-hop — retail's actual
backward-walk settle plays the windup link REVERSED), GetLink/BuildNode/
EnqueueMotionData + the G17 HasVelocity/HasOmega gate (add_motion sets
unconditionally), MultiplyCyclicFramerate + the G13 composite,
PlayAction's insert-before-tail machinery, SCFAST/SCFULL diagnostics.
KEPT at the adapter (register rows): the boundary adjust_motion remap +
locomotion velocity/omega synthesis (AP-75, retire R3-W6/R6), K-fix18
skip-link as post-dispatch RemoveAllLinkAnimations (AP-74, retire
R3-W4 when LeaveGround fires it).
GameWindow queue-drain wiring (the §4 G6 seam): each drained AnimDone
hook → manager.AnimationDone(true) (retail AnimDoneHook::Execute
0x00526c20 → Hook_AnimDone 0x0050fda0 chain), UseTime once per tick
(0x00517d57/0x00517d67); IMotionDoneSink bound to an
ACDREAM_DUMP_MOTION recorder (AD-36 — R3 rebinds to
MotionInterpreter.MotionDone).
Conformance: the 11-scenario pre-cutover trace suite (a6235a36) replays
green with six EXPECTED-DIFF annotations (double-hop walk-run routing,
reversed settle links, Branch-4 physics-only modifiers, Branch-1
style-change links, post-adjust mirrors) — everything unannotated is
byte-identical. Legacy suites repaired by a dedicated agent (fixtures
gain the retail-mandatory StyleDefaults + class-bit-tagged ids;
reflection state-poking replaced with real dispatch; zero category-D
regressions — the suspected cursor bug was a fixture class-bit gap),
plus two vacuously-passing tests fixed. Register: stale IA-4 deleted
(R1-P1 ported the negative-factor swap).
Full suite green: 3,458 passed (374+425+713+1946).
Closes H6, H7, H8, H9, H10-adapter, H16-wiring (r2-port-plan.md §3 Q4).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Ports retail's MotionTableManager (0x0051bxxx; r2-motiontable-decomp.md
§11) above the Q2 CMotionTable: add_to_queue 0x0051bfe0 (append +
immediate collapse), remove_redundant_links 0x0051bf20 (TAIL-ANCHORED
single scan, NOT ACE's restructured loop — cycle-tail block mask
0xb0000000 = STYLE|MODIFIER|ACTION, style-tail 0x70000000 =
CYCLE|MODIFIER|ACTION; the decomp's prose gloss of those masks was
imprecise, the literal constants are ported), truncate_animation_list
0x0051bca0 (zero NumAnims IN PLACE from the tail through the matched
node's successor + CSequence.RemoveLinkAnimations), AnimationDone
0x0051bce0 (counter-driven countdown chain: one call can pop MULTIPLE
entries; action-class pops MotionState's action FIFO; drained-list
counter reset), CheckForCompletedMotions 0x0051be00 / UseTime (zero-tick
sweep, success hardcoded true), initialize_state 0x0051c030 (0x41000003
sentinel), HandleEnterWorld/HandleExitWorld drains (MotionDone
success:false; enter also strips link anims), PerformMovement 0x0051c0b0
(error codes 7 / 0x43 / 0; StopCompletely queues the Ready sentinel
UNCONDITIONALLY).
IMotionDoneSink is the R2 seam standing in for CPhysicsObj::MotionDone —
R3 binds MotionInterpreter.MotionDone (r2-port-plan.md §4 contract).
This queue + remove_redundant_links IS the retail mechanism our old
'Fix B' rapid-motion collapse approximated — Q4 deletes Fix B and routes
SetCycle/PlayAction through PerformMovement.
47 conformance tests: countdown-chain tables, truncate blocked/allowed
matrices for both masks, zero-tick vs counter sweep, world drains, the
walk-run-walk-run collapse trace, the 2026-05-03 walk-to-run golden
(both nodes queued, truncate not firing), PerformMovement error matrix.
Register: AD-34 extended (pending_animations managed LinkedList);
AD-35 added (NotHandled sentinel vs retail's dead-code pointer-leak
default case).
Implemented by a dedicated agent against the committed Q3 spec; diff
scope, mask semantics, truncation range, counter reset, and
PerformMovement paths independently verified against the decomp raw
text before commit. Build + full suite green (3,447 passed).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
CSequence (Core/Physics/Motion): anim-node list with retail's exact
cursor semantics —
- append_animation (0x00525510): first_cyclic slides to the JUST-
APPENDED node on EVERY call (the cyclic tail is always the last
appended node); curr_anim seeds to head + get_starting_frame only
when null; unresolvable anims discarded (G10);
- remove_cyclic_anims (0x00524e40): removed curr_anim snaps BACK to
prev at get_ending_frame (or 0.0); first_cyclic = new tail;
- remove_link_animations/remove_all_link_animations (0x00524be0/
0x00524ca0): removed curr_anim snaps FORWARD to first_cyclic at
get_starting_frame (G11);
- apricot (0x00524b40, PDB-verified retail name): consumed-head trim
bounded by curr_anim AND first_cyclic;
- clear (0x005255b0) resets placement fields too — raw body is
authority over the gap map's G20 note;
- sequence-level velocity/omega with set/combine/subtract (G12);
- multiply_cyclic_animation_fr touches framerates ONLY (G13 —
velocity rescale belongs to R2's change_cycle_speed composite);
- placement frame family + floored accessors (G14).
Register: AD-33 (double vs x87 long double frame_number, G15),
AD-34 (managed LinkedList vs intrusive DLList).
17 list-surgery state-table tests; 39 total R1 tests green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
OnLiveMotionUpdated's remote branch (368 lines of bulk-copy + cycle
picker + per-axis DoInterpretedMotion + command-list router) collapses
to: build InboundInterpretedState from the wire (retail UnPack defaults;
MoveTo packets feed the PlanMoveToStart seed as the forward command) ->
MotionInterpreter.MoveToInterpretedState(ims, RemoteMotionSink) ->
sink.Commit().
RemoteMotionSink (new, App): receives the funnel's gate-passed
dispatches in retail order; the axis-priority pick (fwd > side > turn),
Run->Walk->Ready missing-cycle fallback, overlay routing, ObservedOmega
seeding, and diag lines are MOVED VERBATIM from the pre-S2 block.
Register row AP-73 documents the single-cycle composition approximation
(retail blends modifiers via re_modify — DEV-9, retires with S3/S6).
Retail-verbatim behavior changes:
- Absent stance now defaults to NonCombat 0x8000003D (retail UnPack
default, S0-trace-verified) instead of keep-current.
- Remote command lists flow through the funnel's 15-bit action-stamp
gate — retail's actual mechanism for ACE's re-bundled stale entries;
the old skip-SubState router workaround is now local-player-only.
- Airborne cycle preservation is the funnel's contact_allows_move gate
(K-fix17's guard semantics, now from the retail mechanism).
- Stops ride the same path: empty UM -> flat copy -> Ready dispatch ->
get_state_velocity 0 (DEV-3 core; the 300ms stop-detection fallback
stays until S6 verifies NPC unification).
Full suite green (3290). Live smoke next.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Port retail's three-stamp inbound gate for 0xF74C UpdateMotion:
- MotionSequenceGate (Core/Physics): CPhysicsObj::is_newer (0x00451ad0)
wraparound u16 compare, verbatim per ACE PhysicsObj.is_newer (the BN
pseudo-C setcc returns are garbled; ACE + branch structure are the
oracle). Gates: INSTANCE_TS at dispatch (stale incarnation drops
before any stamp is touched), MOVEMENT_TS strictly-newer (stamped
BEFORE the server-control check, per CPhysics::SetObjectMovement
0x00509690), SERVER_CONTROLLED_MOVE_TS drop-when-stored-newer.
- Seed from CreateObject's PhysicsDesc timestamp block (index 1 =
ObjectMovement now parsed; ACE WorldObject_Networking.cs:411-420
order) — without seeding, entities whose movement sequence is past
0x8000 at spawn would drop every UM against a zero stamp.
Adopt-on-first / advance-only-after, so the #138 rehydrate replay of
retained spawns cannot regress live stamps.
- UpdateMotion + EntitySpawn now carry instance/movement/serverControl
sequences + isAutonomous (was parsed-past; isAutonomous feeds the
S2 funnel's last_move_was_autonomous). Gate wired at the top of
OnLiveMotionUpdated before any state mutation; [UM_STALE] diag under
ACDREAM_DUMP_MOTION / ACDREAM_REMOTE_VEL_DIAG; gate dropped with the
entity on DeleteObject.
Register: AD-32 added (adopt-newer-incarnation instead of retail's
QueueBlobForObject); TS-26 updated (UM side closed, UP side open).
Deviation map: docs/research/2026-07-02-inbound-motion-deviation-map.md.
19 new gate tests + parser coverage; full suite 3276 green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Ports retail's raw->interpreted motion normalization and routes the local
player's velocity through it, so backward/strafe come from the retail source
instead of hand-mirrored controller code (retires register TS-22 + UN-5).
MotionInterpreter (decomp-verbatim, Ghidra/ACE-cross-checked):
- adjust_motion (0x00528010): WalkBackward->WalkForward (x-0.649999976),
TurnLeft->TurnRight (x-1), SideStepLeft->SideStepRight (x-1), sidestep scale
0.5*(WalkAnimSpeed/SidestepAnimSpeed), RunForward early-return, per-channel
holdkey fallback to CurrentHoldKey.
- apply_run_to_command (0x00527be0): WalkForward->RunForward when speed>0 +
UNCONDITIONAL *runRate; TurnRight *1.5; SideStepRight *runRate clamp +/-3.0.
- apply_raw_movement (0x005287e0): copy raw->interpreted, adjust the 3 channels
with per-channel hold keys.
- WalkAnimSpeed unified to the retail-exact 3.11999989f (was 3.12f).
PlayerMovementController: build ONE RawMotionState from MovementInput at
forward_speed=1.0 (apply_run_to_command applies the run rate — a pre-scaled
speed would double-scale), run apply_raw_movement, then take grounded + jump
velocity straight from get_state_velocity (now correct for all directions) and
drive the keyboard turn omega from the interpreted turn_speed (BaseTurnRate x
turn_speed = the same pi/2 formula the remote path uses; numerically identical
to the old TurnRateFor). Deleted the hand-mirrored backward(x-0.65) /
strafe(x+-1.25) formulas in both the grounded and jump blocks. Mouse turn and
the auto-walk path are untouched.
Retail-faithful behavior changes (confirm in smoke): strafe is now
1.25 * ~1.248 * runRate = ~1.56*runRate, clamped via SideStepSpeed<=3.0 so
|v.X|<=3.75 (was 1.25*runRate, no scale/clamp); backward is unchanged
(3.12*0.65*runRate); backward/strafe-left velocity now comes from the pipeline
instead of returning zero. Forward run pace unchanged (4.0*runRate).
Tests: MotionNormalizationTests (17, adjust_motion/apply_run_to_command) +
MotionVelocityPipelineTests (10, apply_raw_movement->get_state_velocity golden
velocities incl. the strafe clamp + turn speeds). Full suite green (3255).
Register: TS-22 + UN-5 deleted (retired); TS-34 added (adjust_motion creature
guard is a no-op — IWeenieObject has no IsCreature; correct for the only caller,
the player). Pseudocode: docs/research/2026-07-01-d6-motion-interp-pseudocode.md.
NEXT D6.2b: the echo-gated wire forward_speed=1.0 question (evidence suggests
ACE relays rather than recomputes; verified via the smoke echo).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ports the three retail outbound-movement packers verbatim (decomp-derived
golden bytes, confirmed via the Ghidra bridge, cross-checked vs holtburger):
- D1 — RawMotionState::Pack (0x0051ed10): new AcDream.Core.Physics.RawMotionState
data type (11 fields + actions, retail defaults) + RawMotionStatePacker that
sets a flag bit only when the field DIFFERS from its default. MoveToState.Build
now takes a RawMotionState instead of presence-based nullable params, so the
over-sent forwardSpeed=1.0 / currentHoldKey=None / default per-axis holdkeys are
no longer emitted. num_actions packs into bits 11-15 (not "bits 11-31").
- D3 — MoveToStatePack::Pack (0x005168f0) trailing byte =
(standingLongjump ? 0x02 : 0) | (contact ? 0x01 : 0); explicit contact/
standingLongjump params (standingLongjump=false honestly until the feature lands).
- D4 — JumpAction rewritten to retail JumpPack::Pack (0x00516d10): extent,
velocity, full Position, four u16 timestamps, align. Removed the spurious
objectGuid/spellId u32s; Position is now packed (it was absent). Body 56 bytes.
- Position::Pack (0x005a9640) / Frame::Pack (0x00535130) verified already-correct
(cellId, origin xyz, quaternion wxyz); locked with a golden test, no change.
GameWindow callers adapted minimally: build the RawMotionState from the existing
MovementResult values (behavior preserved except the intended D1 omissions) and
pass cellId/position/rotation to the Jump send. Pre-existing MotionInterpreter
placeholder struct RawMotionState renamed LegacyRawMotionState (D6/Phase-2 scope,
pure rename) to free the name for the retail-faithful type.
D5 audit: confirmed a real divergence — retail SendMovementEvent (0x006b4680)
stamps only last_sent_position_time after an MTS while SendPositionEvent
(0x006b4770) stamps all three; acdream's NotePositionSent stamps all three on
both paths. Left unchanged (comments added at both call sites), recorded as
register TS-33, deferred to a dedicated cadence-port slice.
Tests: RawMotionStatePackTests / MoveToStateGoldenTests / JumpActionTests /
PositionPackTests + updated MoveToStateTests / AutonomousPositionTests. Full
suite green (Core.Net.Tests 372, full solution 3228 passed / 4 pre-existing skips).
Register: TS-24/TS-25 refreshed (packer now supports actions/style; runtime
emission still deferred), TS-33 added. Roadmap L.2b shipped note added.
Spec: docs/superpowers/specs/2026-06-30-movement-wire-parity-design.md (2-6)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
UI Studio (preview panels through the production renderer), importer dat-fidelity (Fix A/B/C/4/5:
the importer carries dat font/justification/color; boundary look=importer / state=runtime), and the
Character window Attributes tab (reads as retail). 3062 tests green.
Handoff: docs/research/2026-06-26-mockup-stage-handoff.md.
# Conflicts:
# docs/ISSUES.md
# docs/architecture/retail-divergence-register.md
Roadmap: extend D.5-remaining ledger with three new shipped entries (UI Studio,
importer Fix A/B/C, Character window 0x2100002E). Milestone M5: update D.2b
status paragraph to name all shipped sub-phases including the studio, importer
boundary discovery (look=importer / state=runtime), and Character window with
deferred polish pointer (#151).
ISSUES: add #151 (Character window deferred polish — LOW, filed 2026-06-26;
user accepted Attributes tab as good-enough, polish items to be enumerated later).
Issues #149 (studio inventory all-black) and #150 (GameWindow font resolver) were
already present.
Divergence register: add AP-69 (per-element dat-font resolver is studio-only;
GameWindow passes null to the four Import sites until #150 lands). No row for
Fix-4 UIState-group activation (runtime-faithful, not a deviation) or for the
tab-sprite injection / footer-state hiding (same).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The paperdoll doll now matches retail: correct held pose, framing, and
facing. Three decomp-sourced fixes closed the visual gate.
Pose: cdb-confirmed m_didAnimation = 0x030003C0 (gmPaperDollUI), played
once + HELD (set_sequence_animation framerate=0, RedressCreature
0x004a3c22). Dumping the dat showed the 29-frame anim has only two
distinct keyframes — frame 0 (transitional, bent arm) and frames 1..28
(byte-identical: the settled stance, arms down + leg back) — so
ApplyPaperdollPose applies the LAST frame statically (no looping).
Camera: ported verbatim from UIElement_Viewport::SetCamera (decomp
0x004a5a39). position (0.12,-2.4,0.88); direction (0,0,0) => IDENTITY
view frame => look straight down +Y, ZERO yaw; FOV pi/4 (CreatureMode
ctor default 0x004543cf); ambient 0.3. The prior hand-tune aimed the
camera at mid-body, adding a ~2deg yaw that turned the doll's face away
— full-body framing comes from eye-height + FOV, not aiming.
Heading: retail Frame::set_heading(h) (0x00535e40) builds facing
(sin h, cos h); System.Numerics CreateFromAxisAngle(+Z, +h) rotates the
body's default +Y forward to (-sin h, cos h) — the X-lean was MIRRORED
(~22deg), the real cause of the turned-away face. Negate the angle to
land on retail's facing.
Wrap-up: stripped the temporary O/P pose-frame stepper + Slice2
diagnostics; divergence register AP-66 reworded, AP-67 (RTT doll render
vs in-cell CreatureMode::Render) + AP-68 (per-race UpdateForRace
unimpl) added; DollCameraTests pinned to the retail values + a zero-yaw
guard. tools/cdb/paperdoll-pose.cdb = the pose-DID capture script.
Build + full suite green (Core 1579 / Core.Net 343 / App 597 / UI 425).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Brings the 134 D.2b UI commits onto the physics/collision development line so
main can fast-forward. Today's #149 (BSP-less static collision) + #150 (open
doors fully passable) + the full collision/streaming/dense-town-FPS arc meet
the paperdoll/inventory work.
# Conflicts:
# docs/ISSUES.md
# docs/architecture/retail-divergence-register.md
Part A (D4): CObjCell::check_entry_restrictions (pc:309576) gate is omitted from
FindEnvCollisions. Investigation confirmed the gate requires restriction_obj (per-cell
access-lock entity id) + weenie-object-table dispatch (CanMoveInto / CanBypassMoveRestrictions)
— neither exist in acdream. CellPhysics has no restriction_obj field; DatReaderWriter
models no per-cell access locks. Gap is inert in all dev content (ACE starter area has
no access-locked env cells). Documented as AP-50 in the retail divergence register.
Part B (W1): Replace the hardcoded-false smell in BspOnlyDispatch with named internal
helpers PvpExempt() and MissileIgnore() that return false with retail oracle citations
(pc:276808-276841 and pc:274385 respectively). BspOnlyDispatch now folds all three
terms in retail's exact predicate structure. Behavior is byte-identical in M1.5 scope
(both stubs false ⇒ reduces to HAS_PHYSICS_BSP_PS check alone, same as before).
A6.P7 door dispatch unchanged.
Tests: 3 new guard tests in A6P7DispatchRulesTests — W1_PvpExempt_ReturnsFalseInM15Scope,
W1_MissileIgnore_ReturnsFalseInM15Scope, W1_BspOnlyDispatch_DoorStateStillDispatchesBspOnly.
Suite: 1590 pass / 0 fail / 2 skip (was 1587 + 3 = 1590).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Retail CPhysicsObj::FindObjCollisions (0x0050f050) only instant-skips when
BOTH ETHEREAL_PS (0x4) AND IGNORE_COLLISIONS_PS (0x10) are set (pc:276782).
ETHEREAL-alone sets sphere_path.obstruction_ethereal=1 (pc:276806) and
continues to the shape dispatch. BSPTREE::find_collisions (0x0053a496) routes
Path 1 (sphere_intersects_solid) when the flag is set (pc:323742): the open
door has no solid leaf at the doorway, so the test returns OK → player passes
through. CEnvCell::find_env_collisions (0x0052c144) clears the flag first so
ENV walls are never weakened (pc:309580, "D5 clear").
Changes:
- CollisionExemption.ShouldSkip: require BOTH bits for Gate-1 early-out
(previously ETHEREAL alone returned true — the AD-7 shim). Divergence
register row AD-7 deleted.
- SpherePath: add ObstructionEthereal field (mirrors retail
SPHEREPATH.obstruction_ethereal).
- FindObjCollisionsInternal loop: set sp.ObstructionEthereal=(target&0x4)!=0
before shape dispatch; clear it after (per-object clear pc:276989).
Also clear at the null-BSP continue site to keep flag clean.
- FindEnvCollisions: clear sp.ObstructionEthereal=false at top (D5 clear
pc:309580) — ENV cell walls are always solid.
- BSPQuery.FindCollisions Path 1: change `obj.Ethereal` (ObjectInfo.Ethereal,
always false — dead code) to `path.ObstructionEthereal`. Gate now correctly
mirrors retail pc:323742: PLACEMENT_INSERT || obstruction_ethereal.
Consume site change (BSPQuery.cs before/after):
BEFORE: if (path.InsertType == InsertType.Placement || obj.Ethereal)
AFTER: if (path.InsertType == InsertType.Placement || path.ObstructionEthereal)
Mirrors retail pc:323742 exactly. obj.Ethereal was dead code (ObjectInfo.Ethereal
is never set true anywhere); the correct flag is SpherePath.ObstructionEthereal.
Tests: 1580 pass / 0 fail / 2 skip (was 1576/0/2 + 4 new in ObstructionEtherealTests.
CellarUp, CornerFlood, DoorCollision, HouseExitWalk all green — no wall regressions.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Retail oracle: CPartArray::InitParts@0x00517F40, CGfxObj::Serialize@0x00534970 (physics_bsp
gated on serialized-flags bit-0), CPhysicsPart::find_obj_collisions@0x0050D8D0 (returns OK /
passable when physics_bsp==null). Render-mesh bounds never enter collision.
Changes:
- GameWindow.cs: delete the ~200-line VISUAL mesh-bounds collision block (the
isPhantomSetup / isPhantomGfxObj locals + the if-block computing worldMin/worldMax
AABB + the ShadowObjects.Register call that capped and registered the synthetic
cylinder). Also removes dead counter variables scHaveBounds/scRegistered/scNoBounds/
scTooThin; trims the ProbeBuildingEnabled summary line accordingly.
- PhysicsDataCache.cs: delete IsPhantomGfxObjSource (the predicate that only existed
to fence the mesh-AABB synthesis; the "phantom" concept is now the default — no DAT
shape means no registration, verbatim with retail).
- PhysicsDataCachePhantomSourceTests.cs: deleted (tested the removed method).
- ShadowShapeBuilderShapeSourceTests.cs: new guard test — a Setup with parts but
hasPhysicsBsp=false and no CylSpheres/Spheres yields an empty shape list, locking
the DAT-only rule in the builder.
- retail-divergence-register.md: AP-2 row deleted (divergence retired).
Objects with no DAT physics shape (no CylSpheres, no Spheres, no part with a
PhysicsBSP) now register no collision shape and are passable, verbatim with retail.
Objects with real DAT shapes (BSP parts, CylSpheres) are unaffected.
dotnet build green, 22/22 tests passing (ShadowShapeBuilderShapeSourceTests +
CellarUpTrajectoryReplay + CornerFlood + Issue147ArwicBuildings replay harnesses).
Visual gate pending: walk Holtburg + open world; objects that become passable must
match retail (DAT has no physics shape — trees with real CylSpheres still solid).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Divergence AP-66: Slice-1 empty-slot frame vs the Slice-2 doll-backed
transparent look (retired when the doll viewport lands).
- Paperdoll handoff: prominent top note correcting the WRONG "transparent /
per-slot silhouettes" framing — the figure IS the live 3D doll; the
Slots toggle + doll = Slice 2. Points to the project memory's Slice 1
entry for the full DO-NOT-RETRY.
(The detailed shipped-log + corrected model live in the auto-loaded
claude-memory/project_d2b_retail_ui.md, updated this session.)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
PickupEvent (0xF74A) and DeleteObject (0xF747) are semantically distinct:
- 0xF747 = weenie DESTROYED → evict from ClientObjectTable (weenie_object_table)
- 0xF74A = object LEFT THE 3D WORLD VIEW (moved into a container) → remove
the 3D WorldEntity, but the weenie persists in ClientObjectTable
Before this fix, both paths fired EntityDeleted identically, causing
ObjectTableWiring to evict the weenie from ClientObjectTable. The follow-up
InventoryPutObjInContainer (0x0022) then tried MoveItem on an unknown guid
and no-op'd, so the unwielded item simply vanished.
Fix: add `bool FromPickup` (default false) to DeleteObject.Parsed. WorldSession
sets it true on the PickupEvent path and false on the DeleteObject path.
ObjectTableWiring.Wire's EntityDeleted handler skips table.Remove when
FromPickup is true, preserving the weenie for the container-move echo.
GameWindow.OnLiveEntityDeleted (3D entity removal) is untouched — it fires
for both pickups and destroys, as intended.
Divergence register: AP-65 added (data ghosts for other-player pickups until
teleport/relog clear; harmless — no UI queries ContainerId 0).
Tests: +5 (DeleteObject FromPickup parser regression; wiring retain/evict
semantics; Parsed default/explicit FromPickup). 343/343 pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Faithful port of retail UIElement_UIItem::UpdateCapacityDisplay (0x004e16e0):
each container cell (side bags + main pack) shows a vertical UIElement_Meter
(element 0x10000347, back 0x06004D22 / fill 0x06004D23) filled to
GetNumContainedItems / ItemsCapacity, clamped [0,1]; hidden for non-containers
(CapacityFill=-1). Drawn procedurally on UiItemSlot like the triangle/square
overlays (back full + front clipped bottom-up). Right-anchored flush to the cell
edge (visual gate: the dat X=26 sat ~5px off the right edge). Visually confirmed
2026-06-22. Divergence AP-59; polish deferred to ISSUES #146 (exact rect/anchor,
fill direction vs m_eDirection 0x6f, closed-bag lazy-load).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
acdream accumulated every CreateObject from every town visited and never pruned by
distance/time (only on server DeleteObject / respawn de-dup), so the entity tables +
the O(N^2) TickAnimations scan grew with each hop and sank FPS (confirmed in Release).
Faithful port of holtburger liveness.rs (ACE_DESTRUCTION_TIMEOUT_SECS=25,
CONSERVATIVE_VISIBILITY_DISTANCE_M=384): a world entity is evicted only after being
>384m AND outside the 3x3 landblock neighborhood for 25s continuous (arm-on-leave /
clear-on-return). Logic in a pure, unit-tested EntityVisibilityCuller; GameWindow
wires a 1Hz tick that snapshots the world entities + player and tears each evicted
guid down through the existing pruner. Player + held/equipped/contained items are
excluded (player by guid; inventory items never carry a world position so they never
enter the culled map). A re-created object starts fresh (deadline cleared on remove).
Skipped during a teleport hold (frozen player position). AD-32 registered.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The prior commit pinned 0x060011F4 from a research dat-dump of
GetDIDByEnum(0x10000004,7) — it rendered as a GREEN TILE (green slot, no
pack) at the visual gate. Dat-exported the candidates (AcDream.Cli
dump-sprite-sheet / export-ui-sprite): 0x0600127E is the 32x32 brown
backpack (user-hinted, PNG-confirmed). Swap the pinned literal; the
test + AP-51 register row updated to the visually-verified id. Container
type-underlay (green) + backpack base still composited via _iconIds.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The m_topContainer cell (0x100001C9) rendered blank (tex=0). Retail's
IconData::RenderIcons (0x0058d1ee) has an IsThePlayer() branch that draws a
CONSTANT backpack — m_idIcon = GetDIDByEnum(0x10000004, 7) = 0x060011F4,
m_itemType = TYPE_CONTAINER — NOT the player's body icon (the original AP-51
"equipped-pack weenie icon" premise was wrong). Compose that base over the
Container type-underlay via the existing _iconIds delegate. Verified vs decomp
(407546-407549) + IconComposer.GetIcon (base=arg2, type drives underlay) + a
live dat dump (map 0x25000008 index 7 = 0x060011F4). Test locks type+literal.
AP-51 reworded to the residual hardcoded-vs-runtime-resolve nuance (cf. AP-55).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Wires the dormant TeleportAnimSequencer as the transit driver: on PlayerTeleport
the player holds in PortalSpace behind a full-screen fade (FadeOverlay) until the
destination terrain is resident (TeleportWorldReady, gated on the priority-applied
landblock), then materializes (Place), and after the world fades back in regains
control + acks the server (FireLoginComplete). No movement resolves against the
empty world, so the outbound cell frame can't corrupt. Outdoor changes from
place-immediately back to hold-until-resident (now fast, not a band-aid).
- FadeOverlay: fullscreen NDC black quad, alpha = ShowTunnel ? 1 : FadeAlpha.
- Retires TeleportArrivalController + its 2 tests (TAS subsumes the driver role).
- Divergence register: AD-2 updated to the new mechanism; AD-31 (fade vs swirl).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
BuildCellSetAndPickContaining discarded the bool from TryGetTerrainOrigin — when
the current landblock's terrain hadn't been applied yet (priority-apply in flight
after a teleport or dungeon exit), blockOrigin was silently set to (0,0,0). The
AdjustToOutside/GetOutsideLcoord math treated world-frame sphere coordinates as
block-local and marched the cell one landblock per tick in the direction of movement
until lbX or lbY underflowed to 0x00. ACE rejected every subsequent move as a
failed transition.
Fix: honor the bool return. When terrain is unregistered for an OUTDOOR seed
(low < 0x0100), return currentCellId verbatim — "no block-local frame →
preserve". This mirrors the NO-LANDBLOCK verbatim contract in PhysicsEngine.Resolve
and is correct: the cell stays last-known-correct until terrain registers.
Indoor seeds are explicitly excluded (blockOrigin is never consumed by the indoor
pick path; outdoorPickAllowed=false for indoor seeds).
Reproduce + verify via CellMarchLandblockPreservationTests (two new FAILING-before
tests: WestEdge and SouthEdge with empty cache, no anchor → lbX/lbY preserved).
TeleportFarTownRunawayTests updated: no-anchor path now also preserves (pre-fix it
marched south to 0x59; post-fix returns currentCell unchanged).
CellTransitFindCellSetTests, Issue112MembershipTests, PhysicsEngineTests: added
RegisterTerrain for the streaming-center block (in production it is always resident
before outdoor resolves run; tests that used blockOrigin=(0,0,0) as an implicit
fallback now register the block explicitly). All 1567 tests pass.
Divergence AD-30 added to retail-divergence-register.md.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Visual gate (2026-06-22) showed the side-bag/main-pack empty cells drawing yellow
triangles. Root cause: the frame-first heuristic grabbed the 36x36 container
prototype's DirectState child 0x06005D9C — which is the open/SELECTED-container
triangle indicator, NOT a background frame — and stamped it onto every empty cell.
Fix: drop frame-first; FindIconEmpty resolves the inner m_elem_Icon ItemSlot_Empty
THROUGH BaseElement inheritance (0x1000033F -> 0x10000340 -> base 0x1000033E ->
0x1000033B -> 0x06000F6E), so containers get the dark slot background matching the
inventory. Pin test now asserts exact ids (0x06004D20 contents / 0x06000F6E
containers) — the old structural-only assertion let the wrong-but-valid 0x06005D9C
pass (Opus review Minor 2, now vindicated). The triangle + green/yellow selection
square is deferred to container-switching (AP-56 reworded). Full suite green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Inventory contents grid / side-bag / main-pack cells now render the retail
pack-slot empty art (dat cell template via ItemListCellTemplate) instead of the
generic toolbar square. Divergence rows AP-55 (toolbar still hardcoded) + AP-56
(flat single-sprite cell vs retail''s layered prototype).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
