Preserve PlayerDescription inventory/equipment ownership across authoritative manifest replacement, make weapon switching and combat/UI consumers read the same canonical object state, and carry the complete outbound player position frame across landblocks.
Route target-facing and mouse-look through the shared MovementManager and MotionInterpreter completion owner. Match retail input aggregation, toggle ordering, turn/sidestep remapping, per-axis hold keys, and synchronous movement publication without render-only heading state.
Initialize the live streaming origin from the first accepted canonical player Position, defer other projections until that origin exists, and retain logical entity identity through hydration.
Advance the project ledger from completed M2 to active M3, synchronize CLAUDE.md/AGENTS.md and durable memory, and record the next cast-lifecycle, spellbook/enchantment, and two-client portal gates.
Co-Authored-By: Codex <noreply@openai.com>
Retail CPhysicsObj::RemoveLinkAnimations (0x0050fe20) is a tailcall to
CPartArray::HandleEnterWorld (0x00517d70) -> MotionTableManager::
HandleEnterWorld (0x0051bdd0): remove_all_link_animations PLUS a full
pending_animations drain (while (head) AnimationDone(0)), each pop
relaying MotionDone so CMotionInterp pops its pending_motions node in
lockstep. acdream bound the seam to the bare sequence strip, so every
jump's LeaveGround removed the animations that queued manager nodes
were counting down on — orphaning them (NumAnims>0, anims gone) and
permanently damming BOTH queues. MotionsPending() then never drained
(probe round: last player pending=False at the first MovementJump
press; old jump motions still completing at rest minutes later) and
BeginTurnToHeading/BeginMoveForward's verbatim motions_pending gates
starved every armed moveto: ACE's mt-6 walk-to-door armed but the body
never walked (wire-proven, seqs 98-101); the close-range use turn
never completed so the deferred action was silently eaten. Doors only
worked on a fresh session (shallow queue).
Rebind both production sites (remote EnsureRemoteMotionBindings +
the player's EnterPlayerModeNow block) to Manager.HandleEnterWorld();
the sequencer wrapper was a pure passthrough so the manager call is a
strict superset. All six interp seam sites (LeaveGround, HitGround,
Dead, and the detached-object guards) are the same retail chain.
Harness mirrors updated; pins: Issue174LinkStripDrainTests (the seam
drains both queues; fresh motions queue and complete after). Suites:
Core 2535 / App 713 / UI 425 / Net 385 green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The c2dc1a88 wedge fix paired every StopCompletely A9 node with a
completable motion-table type-5 entry via DefaultSink?.StopCompletely()
- but EnterPlayerModeNow called the initial SetPosition (whose teleport
idle is StopCompletely, R3-W6) BEFORE the sequencer/DefaultSink bind
block, so the login A9 node dispatched against a NULL sink and stayed
an orphan. Head-pop-any semantics mean a queue with one orphan never
reaches empty again (later completions just relabel the backlog), so
MotionsPending stayed true at every UseTime and the MoveToManager's
retail wait-for-anims gate (BeginTurnToHeading) never opened: every
server MoveTo armed (movingTo=True, Initialized=True, tracker fed,
node plan built) and the body never moved.
Pinned live by the [autowalk-gate] probe: type=MoveToObject init=True
contact=True motionsPending=True pm=[0x41000003] nodes=[TurnToHeading,
MoveToPosition] curCmd=0 - identical every half-second, forever.
Fix: the sequencer/sink bind block in EnterPlayerModeNow moves ABOVE
the initial physics Resolve + SetPosition (no data dependency - the
block only needs playerEntity/_animatedEntities). Teleport-arrival
SetPositions were already safe (sink long bound). Test rigs
(PlayerMoveToCutoverTests.MakeRig, W6EdgeDrivenMovementTests) mirror
the fixed order, and a new LoginQueue_DrainsToEmpty_UnderProductionFeed
test pins the invariant the probe caught: after login, pending_motions
must reach EMPTY under the production completion feed.
The [autowalk-gate]/[autowalk-feed] diagnostics stay in for the live
verify pass (TEMPORARY-tagged; strip when #5 closes). Full suite
green: 3,958.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Live bug (2026-07-03, user door test): a server MoveTo armed
(movingTo=True) but the local body never moved; the retail observer saw
ACE walk the server-side player to the door; the next local input
reasserted the stale position (rubber-band). Log evidence: the player's
pending_motions queue was non-empty on 92/94 MotionDone pops (remotes:
0/40) - MoveToManager's retail wait-for-anims gate
(BeginTurnToHeading's MotionsPending check) never opened.
ROOT CAUSE (found via a production-faithful repro test - the original
suite force-drained the queue, masking it): the R3 port MISIDENTIFIED
retail's StopCompletely_Internal body. It is NOT a physics velocity
zero - CPhysicsObj::StopCompletely_Internal (0x0050ead0) tailcalls
CPartArray::StopCompletelyInternal (0x00518890) which is
MotionTableManager::PerformMovement(type 5): an ANIMATION-side full
stop whose UNCONDITIONALLY-queued pending_animations entry is the
completable partner of the A9 pending_motions node
CMotionInterp::StopCompletely enqueues (raw @00527e90 between the
state writes and add_to_queue). Without the dispatch, every
StopCompletely (login/teleport SetPosition + every MoveToManager
PerformMovement head) left an orphan node with no completion - the
queue never drained at idle. (The R3 code comment claimed a register
row for the stand-in; none was ever added - porting the real mechanism
closes that violation without a row.)
Fix set (all retail-anchored):
- IInterpretedMotionSink gains StopCompletely() (default true = the
null-sink posture); MotionTableDispatchSink routes it to the R2
manager's already-ported type-5 op (StopObjectCompletely +
Ready-sentinel entry) + TurnStopped for the ObservedOmega seam.
- MotionInterpreter.StopCompletely calls DefaultSink?.StopCompletely()
at the exact retail slot (after the state writes, before
add_to_queue); the immediate set_velocity(Zero) is kept as the
documented physics-effect stand-in.
- PlayerMovementController ticks CheckForCompletedMotions after
UseTime - retail's per-tick CPartArray::HandleMovement slot
(0x00517d60 = MotionTableManager::UseTime = CheckForCompletedMotions
tailcall, called every tick from UpdateObjectInternal @005159a4).
NOTE: a first-cut per-tick apply_current_movement pump was tried and
REVERTED - retail's apply callers are all event-driven (hold-key,
HitGround/LeaveGround, ReportExhaustion), not per-tick; the remote
block's per-tick apply is a pre-existing adaptation outside this
fix's scope.
- The P1 autonomous-store family, completing the pin's port shape
(the gate landed in V5; the STORE side was missing):
(a) the unpack store (00509730: last_move_was_autonomous = wire
byte) in the GameWindow player branch - local player only for now
(remote interps have no WeenieObj, which A3 reads as IsThePlayer;
storing a remote's autonomous byte would mis-route their per-tick
apply onto the raw branch);
(b) input edges store =1 at the controller edge block - retail's
CPhysicsObj::DoMotion @00510030 / StopMotion @005100e0 /
TakeControlFromServer @006b32f4 input-boundary stores;
(c) section 2's per-frame velocity write now PRESERVES the flag
(V5's first cut stamped it per frame, the wrong altitude - retail
stores it at event boundaries only);
(d) InstallSpeculativeTurnToTarget stores false (models the wire
mt-6's unpack store; part of the AP-23 adaptation) so the
event-driven applies (e.g. HitGround mid-moveto) route interpreted
and cannot clobber the manager's dispatched motions with idle raw
state.
Tests: new ServerMoveToPosition_ProductionCompletionFeed_WalksToArrival
drives the controller under the PRODUCTION completion feed
(sequencer.Advance -> MotionDoneTarget) instead of force-draining -
this is the test that reproduced the live wedge (queue stuck at the
two A9 Ready orphans) and now proves the drain. Existing cutover tests
mirror the wire-path autonomous store before PerformMovement. Full
suite green: 3,957.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The local player now runs server MoveTos through the same verbatim
MoveToManager remotes got in V4. One commit, GameWindow + controller,
per the no-fan-out rule for coupled slices.
P1 gate (V0-pins.md P1, ported verbatim): CPhysics::SetObjectMovement
(0x00509690 @0050972e) drops any movement event whose wire autonomous
byte is set when the addressed object IsThePlayer - ACE's self-addressed
MoveToState reflection (MovementData.cs:162 IsAutonomous=1) never
reaches unpack_movement, which is what makes the retail unconditional
unpack-head interrupt safe. Gate placed AFTER the sequence gates
(retail order). The stale "ACE follows every mt=0x06 with an mt=0x00"
comment block dies with the code it excused (its causal story was
pre-#75; refuted in V0-pins P1).
Run-rate re-anchor (P1 contingency NOT needed - no AD row): the echo
tap ApplyServerRunRate is deleted outright. Both retail feeds already
exist: PlayerDescription skills via SetCharacterSkills (K-fix7) into
InqRunRate (preferred by apply_run_to_command/get_state_velocity), and
the mt-6/7 my_run_rate wire write (M13) now performed for the player by
the shared RouteServerMoveTo. The tap's InterpretedState.ForwardSpeed
overwrite was a pre-R3 mechanism that fought the ported machinery.
B.6 auto-walk deleted wholesale (~330 lines): fields, Begin/End/
DriveServerAutoWalk, IsServerAutoWalking, AutoWalkArrived, the
autoWalkConsumedMotion gates, the #69 turn-dir edge synthesizer, and
the relocated AutoWalkArrivalEpsilon/AutoWalkTurnRateFor constants
(AD-26 retired - the invented 5/30-degree bands are gone; arrival is
retail's distance predicate; turn-first is the TurnToHeading node).
TS-36 retired: Motion.InterruptCurrentMovement binds to
MoveTo.CancelMoveTo(ActionCancelled). Movement-key edges (ctor-default
params carry the 0x8000 CancelMoveTo bit), Shift (set_hold_run
interrupt:true), jump(), StopCompletely, and teleport all cancel a
running moveto through the retail chain - verified by controller-level
tests, not assumed.
MoveToComplete seam WIDENED to natural completion (Core): retail's
BeginNextNode empty-queue completion is inline CleanUp+StopCompletely
(raw @00529d47) and notifies nothing - the client-addition seam had to
fire there (both sticky and non-sticky exits) or AD-27's deferred
close-range Use/PickUp re-send never fires. Never fires on CancelMoveTo.
AD-27 re-anchored from the deleted AutoWalkArrived event.
InstallSpeculativeTurnToTarget rewired through the player's manager
(retail 9a/9b client-initiated shape): close-range -> TurnToObject,
far -> MoveToObject; AP-23 radius buckets + the #77 CanCharge
prediction survive as the params source (row re-anchored).
Per-tick: MoveTo.UseTime() at the old DriveServerAutoWalk slot
(provisional until R6, per the plan's placement decision); the P4
player-side TargetTracker twin (fields + pre-Update feed) mirrors the
remote adapter (AP-79 row widened). HitGround dual-call added on the
player landing edge AND the remote landing site - the latter closes a
V4 wiring-contract gap the adversarial review caught (retail 2d order:
minterp then moveto; without it a landing NPC's moveto never re-arms).
Also from the adversarial review: the mt-8 unresolvable-target degrade
now performs retail's params.desired_heading = wire_heading
substitution (decomp 2f case 8; invisible against ACE per P6, required
for the verbatim degrade); the V4 remote MoveToManager binding gets a
real curTime clock (the ctor stub advanced 1/30s per READ, skewing the
progress/fail-distance windows - note: the pending V4 NPC smoke ran on
the skewed clock); TS-33 row extended with the orientation-diff gap
(ApproxPositionEqual vs retail Frame::is_equal full-frame compare - a
stationary heading snap does not reach the wire; masked against ACE,
R7 outbound scope owns the fix).
MoveToMath gains HeadingFromYaw/YawFromHeading (the P5 scalar bridge
for yaw-authoritative bodies - the player's heading snap must write
Yaw, not the quaternion the controller re-derives every frame).
Tests: 3,956 green (+8). New: MoveToManagerCompletionSeamTests (arrival
fires once with None, no refire, cancel never fires, sticky handoff
order) + PlayerMoveToCutoverTests (EnterPlayerModeNow-shape rig: walks
to arrival with zero user input and zero MotionStateChanged frames -
the #75 invariant by construction; TurnToHeading rotates Yaw and snaps
exact; W-edge and jump cancel without firing complete). W6 edge suite
retargeted from the deleted echo tap to a direct apply pass (the
regression lives in ApplyInterpretedMovement, not the wire trigger).
Spec: docs/research/2026-07-03-r4-moveto/r4-port-plan.md section 3 V5.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Erik